Study of the Base Plate Motion Between the Pairs of Shafts

2022 ◽  
pp. 514-523
Author(s):  
Z. A. Rakhimova
Keyword(s):  
Base Plate ◽  
Plate Motion

DIDACTIC MODEL OF LIFT

2018 ◽  
pp. 219-224
Author(s):  
Lubica Miková
Keyword(s):  
Printed Circuit Board ◽  
Base Plate ◽  
Educational Process ◽  
Circuit Board ◽  
Basic Knowledge ◽  
Practical Training ◽  
Target Setting ◽  
Lower Base ◽  
Complex Design ◽  
Starting Point

Urgency of the research. Mechatronics products become more sophisticated and complicated. Mechatronic engineers should be prepared for this complex design process. Practical experimental model helps improve educational process as preparing for practice. Target setting. Miniaturized model of the lift suitable for practical training on subjects focused to microcontrollers, sen-sors, actuators etc. Students have possibility to make practice on laboratory exercises, where they can verify theoretical knowledge obtained on lectures. The arrangement of the model has modular character, because of possibility to rearrange or adding of new function into model. The aim was to create minimized model of real lift with all functions and systems. Actual scientific researches and issues analysis. Many universities are oriented only to finished robotic kits and do not support creativity of students. Open access and open structure model missing in this field. There is a need for fast prototyping model, which allows the creation of new design of product. Uninvestigated parts of general matters defining. The question of the design of printed circuit board are uninvestigated, because they need more time than allows normal exercises. The research objective. The main aim of educational process is to educate engineers with basic knowledge, skills and handicraft. Practical models help as support devices for fulfil of this aim. All mechatronic students can practice a training on these practical models. They become as more skilled and well-oriented engineers.. The statement of basic materials. Construction consist of upper and lower base plate connected with four pillars used as linear guide for moving of lift cage. Lower base plate includes base microcontrollers boards, resistor network, power transis-tor array board, power supply terminals, relay modules, PWM module and signals terminals. Upper base plate consist of DC motor with gearing and screw mechanism for moving the lift cage. Conclusions. The model enables supports the creativity of the students. The starting point of the using of the model can be without any wired connections. Students should connect every part and try functionality of every function. The students receive the defined several problems and they have to analyze it and make any proposal for solution of defined problems.

Orientation of absolute African plate motion revealed by tomomorphometric analysis of the Ethiopian dome

Geology ◽  
2000 ◽  
Vol 28 (12) ◽  
pp. 1147-1149 ◽  
Author(s):  
Bernard Collet ◽  
Jean François Parrot ◽  
Hind Taud
Keyword(s):  
Plate Motion ◽  
African Plate

THE ROLE OF SHEAR ZONES IN CARIBBEAN PLATE MOTION

2016 ◽  
Author(s):  
Simin Gao ◽  
◽  
Margarete Jadamec
Keyword(s):  
Shear Zones ◽  
Plate Motion ◽  
Caribbean Plate

Finite Element Analysis of the Distributed Vibration Absorbers for Structural Noise Control

2005 ◽  
Author(s):  
Ashwini Gautam ◽  
Chris Fuller ◽  
James Carneal
Keyword(s):  
Finite Element ◽  
Numerical Model ◽  
Base Plate ◽  
Element Model ◽  
Fe Model ◽  
Vibration Absorbers ◽  
Element Analysis ◽  
Poroelastic Media ◽  
Hexahedral Elements ◽  
Component Models

This work presents an extensive analysis of the properties of distributed vibration absorbers (DVAs) and their effectiveness in controlling the sound radiation from the base structure. The DVA acts as a distributed mass absorber consisting of a thin metal sheet covering a layer of acoustic foam (porous media) that behaves like a distributed spring-mass-damper system. To assess the effectiveness of these DVAs in controlling the vibration of the base structures (plate) a detailed finite elements model has been developed for the DVA and base plate structure. The foam was modeled as a poroelastic media using 8 node hexahedral elements. The structural (plate) domain was modeled using 16 degree of freedom plate elements. Each of the finite element models have been validated by comparing the numerical results with the available analytical and experimental results. These component models were combined to model the DVA. Preliminary experiments conducted on the DVAs have shown an excellent agreement between the results obtained from the numerical model of the DVA and from the experiments. The component models and the DVA model were then combined into a larger FE model comprised of a base plate with the DVA treatment on its surface. The results from the simulation of this numerical model have shown that there has been a significant reduction in the vibration levels of the base plate due to DVA treatment on it. It has been shown from this work that the inclusion of the DVAs on the base plate reduces their vibration response and therefore the radiated noise. Moreover, the detailed development of the finite element model for the foam has provided us with the capability to analyze the physics behind the behavior of the distributed vibration absorbers (DVAs) and to develop more optimized designs for the same.

scholarly journals Droplet impact onto a spring-supported plate: analysis and simulations

2021 ◽  
Vol 128 (1) ◽  
Author(s):  
Michael J. Negus ◽  
Matthew R. Moore ◽  
James M. Oliver ◽  
Radu Cimpeanu
Keyword(s):  
High Speed ◽  
Flexible Substrate ◽  
Practical Importance ◽  
Hybrid Approach ◽  
Hydrodynamic Pressure ◽  
Analytical Framework ◽  
Canonical System ◽  
Linear Process ◽  
Plate Motion ◽  
The Impact

AbstractThe high-speed impact of a droplet onto a flexible substrate is a highly non-linear process of practical importance, which poses formidable modelling challenges in the context of fluid–structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct numerical simulation (DNS). In the former, we derive a generalisation of inviscid Wagner theory to approximate the flow behaviour during the early stages of the impact. In the latter, we perform detailed DNS designed to validate the analytical framework, as well as provide insight into later times beyond the reach of the proposed analytical model. Drawing from both methods, we observe the strong influence that the mass of the plate, resistance of the dashpot, and stiffness of the spring have on the motion of the solid, which undergo forced damped oscillations. Furthermore, we examine how the plate motion affects the dynamics of the droplet, predominantly through altering its internal hydrodynamic pressure distribution. We build on the interplay between these techniques, demonstrating that a hybrid approach leads to improved model and computational development, as well as result interpretation, across multiple length and time scales.

scholarly journals Interfacial Morphology and Bonding Mechanism of Explosive Weld Joints

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Tingting Zhang ◽  
Wenxian Wang ◽  
Zhifeng Yan ◽  
Jie Zhang
Keyword(s):  
Laminated Composite ◽  
Base Plate ◽  
Sine Wave ◽  
Laminated Plates ◽  
Bonding Interface ◽  
Interfacial Structure ◽  
Bonding Mechanism ◽  
Critical Material ◽  
Interfacial Morphology ◽  
Az31b Alloy

AbstractInterfacial structure greatly affects the mechanical properties of laminated plates. However, the critical material properties that impact the interfacial morphology, appearance, and associated bonding mechanism of explosive welded plates are still unknown. In this paper, the same base plate (AZ31B alloy) and different flyer metals (aluminum alloy, copper, and stainless steel) were used to investigate interfacial morphology and structure. SEM and TEM results showed that typical sine wave, wave-like, and half-wave-like interfaces were found at the bonding interfaces of Al/Mg, Cu/Mg and SS/Mg clad plates, respectively. The different interfacial morphologies were mainly due to the differences in hardness and yield strength between the flyer and base metals. The results of the microstructural distribution at the bonding interface indicated metallurgical bonding, instead of the commonly believed solid-state bonding, in the explosive welded clad plate. In addition, the shear strength of the bonding interface of the explosive welded Al/Mg, Cu/Mg and SS/Mg clad plates can reach up to 201.2 MPa, 147.8 MPa, and 128.4 MPa, respectively. The proposed research provides the design basis for laminated composite metal plates fabrication by explosive welding technology.

Sign in / Sign up

Export Citation Format

Share Document