Fundamentals of Self-healing Construction Materials

Author(s):  
Antonios Kanellopoulos ◽  
Jose Norambuena-Contreras
2021 ◽  
Vol 6 (7) ◽  
pp. 94
Author(s):  
Salmabanu Luhar ◽  
Ismail Luhar ◽  
Faiz Uddin Ahmed Shaikh

It is a universal fact that concrete is one of the most employed construction materials and hence its exigency is booming at a rocket pace, which in turn, has resulted in a titanic demand of ordinary Portland cement. Regrettably, the production of this essential binder of concrete is not merely found to consume restricted natural resources but also found to be associated with emission of carbon dioxide—a primary greenhouse gas (GHG) which is directly answerable to earth heating, resulting in the gigantic dilemma of global warming. Nowadays, in order to address all these impasses, researchers are attracted to innovative Geopolymer concrete technology. However, crack development of various sizes within the concrete is inevitable irrespective of its kind, mix design, etc., owing to external and internal factors viz., over-loading, exposure to severe environments, shrinkage, or error in design, etc., which need to be sealed otherwise these openings permits CO2, water, fluids, chemicals, harmful gases, etc., to pass through reducing service life and ultimately causing the failure of concrete structures in the long term. That is why instant repairs of these cracks are essential, but manual mends are time-consuming and costly too. Hence, self-healing of cracks is desirable to ease their maintenances and repairs. Self-healing geopolymer concrete (SHGPC) is a revolutionary product extending the solution to all these predicaments. The present manuscript investigates the self-healing ability of geopolymer paste, geopolymer mortar, and geopolymer concrete—a slag-based fiber-reinforced and a variety of other composites that endow with multifunction have also been compared, keeping the constant ratio of water to the binder. Additionally, the feasibility of bacteria in a metakaolin-based geopolymer concrete for self-healing the cracks employing Bacteria-Sporosarcina pasteurii, producing Microbial Carbonate Precipitations (MCP), was taken into account with leakage and the healing process in a precipitation medium. Several self-healing mechanisms, assistances, applications, and challenges of every strategy are accentuated, compared with their impacts as a practicable solution of autogenously-healing mechanisms while active concretes are subjected to deterioration, corrosion, cracking, and degradation have also been reviewed systematically.


2019 ◽  
Vol 8 (3) ◽  
pp. 1898-1901

Cement concrete is a most used construction material, due to its enormous demand worldwide in the construction sector. Concrete serves many purposes in different adverse conditions, there are many advantages but there is one limitation that is concrete is not flexible. Concrete Canvas brought a revolutionary change in the construction materials called Geosynthetic Cementitious Composite Mats (GCCMs) which as many applications and used as an alternative to conventional concrete. It is a flexible, concrete canvas that gets hardens on hydration to form a thin, durable, waterproof and low-carbon concrete layer. Concrete Canvas may find its tremendous scope in the Construction sector as fire resistance and water proofing material. The concrete canvas has a self healing property thereby adds good benefit to the life of material and economically because of its zero percent repairs maintenance. Even though if the concrete canvas gets damaged after a period of time, it gets self healed with the contact of water which helps in the hydration process. This paper mainly focuses on the case study done on the applicability of concrete canvas for fire resistant, Water proof and bulletproofing with the help of AP State Police and to explore different applications in Construction sector as well as Defense sector.


2019 ◽  
Vol 945 ◽  
pp. 36-41
Author(s):  
Michail Bruyako ◽  
L. Grigoryeva

As a result of the influence of the corrosive environment, the construction materials have a decrease in performance. To increase the service life of the structures, continuous monitoring and, if necessary, restorative repairs are carried out. One of the ways to maintain the initial properties for materials is to give them a self-healing effect by introducing a specially developed additive containing a bioactive component in the manufacturing process. The article presents the results of research on the ability of building materials based on mineral binders to self-repair. Mixtures containing nutrient medium for the biomass of aerobic bacteria were used as bioadditives. Portland cement and gypsum binder were used as mineral binders. The obtained results allow to make a conclusion about a significant change in the rheological properties of cement-sand mortars due to the presence of biological surface-active substances that are part of the cells of microorganisms. The effect of changing the concentration of cells on the setting time and on the strength characteristics of cement-sand mortars was established.


Biomimetics ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 47
Author(s):  
Kwok Wei Shah ◽  
Ghasan Fahim Huseien

Climate change is anticipated to have a major impact on concrete structures through increasing rates of deterioration as well the impacts of extreme weather events. The deterioration can affect directly or indirectly climate change in addition to the variation in the carbon dioxide concentration, temperature and relative humidity. The deterioration that occurs from the very beginning of the service not only reduces the lifespan of the concretes but also demands more cement to maintain the durability. Meanwhile, the repair process of damaged parts is highly labor intensive and expensive. Thus, the self-healing of such damages is essential for the environmental safety and energy cost saving. The design and production of the self-healing as well as sustainable concretes are intensely researched within the construction industries. Based on these factors, this article provides the materials and methods required for a comprehensive assessment of self-healing concretes. Past developments, recent trends, environmental impacts, sustainability, merits and demerits of several methods for the production of self-healing concrete are discussed and analyzed.


Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1101 ◽  
Author(s):  
Shaopeng Wu ◽  
Inge Hoff ◽  
Serji Amirkhanian ◽  
Yue Xiao

This special issue, “Environment-Friendly Construction Materials”, has been proposed and organized as a means to present recent developments in the field of construction materials. For this reason, the articles highlighted in this editorial relate to different aspects of construction materials, from pavement materials to building materials, from material design to structural design, from self-healing to cold recycling, from asphalt mixture to cement concrete.


2019 ◽  
Vol 74 (3) ◽  
pp. 121-125
Author(s):  
Lívia Ribeiro de Souza ◽  
Abir Al-Tabbaa ◽  
Damiano Rossi

2021 ◽  
Vol 13 (16) ◽  
pp. 9033
Author(s):  
Valery Lesovik ◽  
Roman Fediuk ◽  
Mugahed Amran ◽  
Nikolai Vatin ◽  
Roman Timokhin

A person spends most of his life in rooms built from various building materials; therefore, the optimization of the human environment is an important and complex task that requires interdisciplinary approaches. Within the framework of the new theory of geomimetics in the building science of materials, the concepts of technogenic metasomatism, the affinity of microstructures, and the possibilities of creating composites that respond to operational loads and can self-heal defects have been created. The article aims to introduce the basic principles of the science of geomimetics in terms of the design and synthesis of building materials. The study’s novelty lies in the concept of technogenic metasomatism and the affinity of microstructures developed by the authors. Novel technologies have been proposed to produce a wide range of composite binders (including waterproof and frost-resistant gypsum binders) using novel forms of source materials with high free internal energy. The affinity microstructures for anisotropic materials have been formulated, which involves the design of multilayered composites and the repair of compounds at three levels (nano-, micro-, macro-). The proposed theory of technogenic metasomatism in the building science of materials represents an evolutionary stage for composites that are categorized by their adaptation to evolving circumstances in the operation of buildings and structures. Materials for three-dimensional additive technologies in construction are proposed, and examples of these can be found in nature. Different ways of applying our concept for the design of building materials in future works are proposed.


2020 ◽  
Vol 12 (2) ◽  
pp. 696 ◽  
Author(s):  
Elżbieta Stanaszek-Tomal

The right selection of building materials plays an important role when designing a building to fall within the definition of sustainable development. One of the most commonly used construction materials is concrete. Its production causes a high energy burden on the environment. Concrete is susceptible to external factors. As a result, cracks occur in the material. Achieving its durability along with the assumptions of sustainable construction means there is a need to use an environmentally friendly and effective technique of alternative crack removal in the damaged material. Bacterial self-healing concrete reduces costs in terms of detection of damage and maintenance of concrete structures, thus ensuring a safe lifetime of the structure. Bacterial concrete can improve its durability. However, it is not currently used on an industrial scale. The high cost of the substrates used means that they are not used on an industrial scale. Many research units try to reduce production costs through various methods; however, bacterial concrete can be an effective response to sustainability.


Sign in / Sign up

Export Citation Format

Share Document