In Situ Test on Dynamic Response of Single Surface Slope

2015 ◽  
pp. 1723-1728
Author(s):  
Shengwen Qi ◽  
C. Derek Martin ◽  
Shenglin Qi ◽  
Yu Zou
Keyword(s):  
Dynamic Response ◽  
Surface Slope ◽  
In Situ Test

The Dynamic Response of a Steel Box-Girder Footbridge under Synchronized Human Stance Excitation

2014 ◽  
Vol 1049-1050 ◽  
pp. 383-386
Author(s):  
Ju Bing Zhang ◽  
Xian Zhang ◽  
Xiao Peng Li
Keyword(s):  
Dynamic Response ◽  
Continuous Beam ◽  
Box Girder ◽  
Vibration Signals ◽  
In Situ Test ◽  
Steel Box Girder ◽  
Code Comparison ◽  
Acceleration Data ◽  
Vibration Serviceability

In order to research into the dynamic response of a steel box-girder continuous beam footbridge excited by a synchronised human stance excitation, a in-situ test and a code comparison were conducted. Sixteen model 891-B accelerometers of vertical, horizontal and lateral directions were instrumented on the bridge and the vibration signals were aqcuired at a sampling frequency of 512 Hz. The acceleration data were transformed into frequency domain to find out the fundamental frequency of the bridge, and the frequency weighted root-mean-square acceleration data were analysed to evaluate the bridge’s vibration serviceability under synchronised human excitation. Further more, the international standard of BSI5400, Bro2004, EN1990, and ISO10137 were applied to the aquired acceleration data to compare their applicability. The results indicate that the dynamic response of the footbridge will not invite uncomfortableness of the pedestrians.

In-situ test on impact loads of a five-module 100% low-floor tram and the prediction of damage characteristics of a pile-plank-supported tram track

2021 ◽  
Vol 277 ◽  
pp. 122320
Author(s):  
Yao Shan ◽  
Xiangliang Zhou ◽  
Guohui Cheng ◽  
Zhangqi Jiang ◽  
Shunhua Zhou
Keyword(s):  
Impact Loads ◽  
In Situ Test ◽  
Damage Characteristics

scholarly journals Design and Application of an In Situ Test Device for Rheological Characteristic Measurements of Liquefied Submarine Sediments

2021 ◽  
Vol 9 (6) ◽  
pp. 639
Author(s):  
Hong Zhang ◽  
Xiaolei Liu ◽  
Anduo Chen ◽  
Weijia Li ◽  
Yang Lu ◽  
...  
Keyword(s):  
Yellow River ◽  
Rheological Characteristic ◽  
Yellow River Delta ◽  
Turbidity Currents ◽  
Rheological Characteristics ◽  
Submarine Landslides ◽  
Test Device ◽  
Offshore Area ◽  
In Situ Test

Liquefied submarine sediments can easily lead to submarine landslides and turbidity currents, and cause serious damage to offshore engineering facilities. Understanding the rheological characteristics of liquefied sediments is critical for improving our knowledge of the prevention of submarine geo-hazards and the evolution of submarine topography. In this study, an in situ test device was developed to measure the rheological properties of liquefied sediments. The test principle is the shear column theory. The device was tested in the subaqueous Yellow River delta, and the test results indicated that liquefied sediments can be regarded as “non-Newtonian fluids with shear thinning characteristics”. Furthermore, a laboratory rheological test was conducted as a contrast experiment to qualitatively verify the accuracy of the in situ test data. Through the comparison of experiments, it was proved that the use of the in situ device in this paper is suitable and reliable for the measurement of the rheological characteristics of liquefied submarine sediments. Considering the fact that liquefaction may occur in deeper water (>5 m), a work pattern for the device in the offshore area is given. This novel device provides a new way to test the undrained shear strength of liquefied sediments in submarine engineering.

scholarly journals In Situ Shear Test for Revealing the Mechanical Properties of the Gravelly Slip Zone Soil

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6531 ◽  
Author(s):  
Zongxing Zou ◽  
Qi Zhang ◽  
Chengren Xiong ◽  
Huiming Tang ◽  
Lei Fan ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Plastic Deformation ◽  
Shear Test ◽  
Slip Zone ◽  
Three Gorges Reservoir Area ◽  
Silty Clay ◽  
Sigmoid Function ◽  
In Situ Test ◽  
Deformation Stage

Slip zone soil is usually composed of clay or silty clay; in some special geological environments, it contains gravels, which make the properties of the slip zone soil more complex. Unfortunately, in many indoor shear tests, gravels are removed to meet the demands of apparatus size, and the in situ mechanical property of the gravelly slip zone soil is rarely studied. In this study, the shear mechanical property of the gravelly slip zone soil of Huangtupo landslide in the Three Gorges Reservoir area of China was investigated by the in situ shear test. The test results show that the shear deformation process of the gravelly slip zone soil includes an elastic deformation stage, elastic–plastic deformation stage, and plastic deformation stage. Four functions were introduced to express the shear constitutive model of the gravelly slip zone soil, and the asymmetric sigmoid function was demonstrated to be the optimum one to describe the relationship of the shear stress and shear displacement with a correlation coefficient of 0.986. The comparison between the in situ test and indoor direct shear test indicates that gravels increase the strength of the slip zone soil. Therefore, the shear strength parameters of the gravelly slip zone soil obtained by the in situ test are more preferable for evaluating the stability of the landslide and designing the anti-slide structures.

Coupled Thermo-Hydro-Geochemical Models of Engineered Barrier Systems: The Febex Project

2000 ◽  
Vol 663 ◽  
Author(s):  
J. Samper ◽  
R. Juncosa ◽  
V. Navarro ◽  
J. Delgado ◽  
L. Montenegro ◽  
...  
Keyword(s):  
Large Scale ◽  
Reference Model ◽  
Numerical Models ◽  
Full Scale ◽  
Small Scale ◽  
Model Parameters ◽  
In Situ Test ◽  
Wide Range ◽  
Engineered Barrier

ABSTRACTFEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project dealing with the bentonite engineered barrier designed for sealing and containment of waste in a high level radioactive waste repository (HLWR). It includes two main experiments: an situ full-scale test performed at Grimsel (GTS) and a mock-up test operating since February 1997 at CIEMAT facilities in Madrid (Spain) [1,2,3]. One of the objectives of FEBEX is the development and testing of conceptual and numerical models for the thermal, hydrodynamic, and geochemical (THG) processes expected to take place in engineered clay barriers. A significant improvement in coupled THG modeling of the clay barrier has been achieved both in terms of a better understanding of THG processes and more sophisticated THG computer codes. The ability of these models to reproduce the observed THG patterns in a wide range of THG conditions enhances the confidence in their prediction capabilities. Numerical THG models of heating and hydration experiments performed on small-scale lab cells provide excellent results for temperatures, water inflow and final water content in the cells [3]. Calculated concentrations at the end of the experiments reproduce most of the patterns of measured data. In general, the fit of concentrations of dissolved species is better than that of exchanged cations. These models were later used to simulate the evolution of the large-scale experiments (in situ and mock-up). Some thermo-hydrodynamic hypotheses and bentonite parameters were slightly revised during TH calibration of the mock-up test. The results of the reference model reproduce simultaneously the observed water inflows and bentonite temperatures and relative humidities. Although the model is highly sensitive to one-at-a-time variations in model parameters, the possibility of parameter combinations leading to similar fits cannot be precluded. The TH model of the “in situ” test is based on the same bentonite TH parameters and assumptions as for the “mock-up” test. Granite parameters were slightly modified during the calibration process in order to reproduce the observed thermal and hydrodynamic evolution. The reference model captures properly relative humidities and temperatures in the bentonite [3]. It also reproduces the observed spatial distribution of water pressures and temperatures in the granite. Once calibrated the TH aspects of the model, predictions of the THG evolution of both tests were performed. Data from the dismantling of the in situ test, which is planned for the summer of 2001, will provide a unique opportunity to test and validate current THG models of the EBS.

Sign in / Sign up

Export Citation Format

Share Document