Hard + Soft: Robotic Needle Felting for Nonwoven Textiles

Author(s):  
Wes McGee ◽  
Tsz Yan Ng ◽  
Asa Peller
Keyword(s):  
2020 ◽  
pp. 152808372092149
Author(s):  
Saraç E Gözde ◽  
Öner Erhan ◽  
Kahraman M Vezir

Organic coconut oil was investigated as a bio-based phase change material in core, and melamine formaldehyde was used as shell material to fabricate microencapsulated phase change material for thermo-regulation in nonwoven textiles. The microcapsules were synthesized using in situ polymerization method. The produced microcapsules (microencapsulated phase change material) were applied by knife coating in different ratios (1:5 and 1.5:5; MPCM: coating paste by wt.) to 100% polypropylene nonwoven, porous, and hydrophilic layer of a laminated, spunbond, and double-layer fabric. The coated layer was confined within two layers of the fabric to develop a thermo-regulative system on the nonwoven fabric to regulate the body temperature in surgeries. The two layers were composed by applying heat (140°C) and pressure (12 kg/cm2). Organic coconut oil, the fabricated microcapsule, and the composite fabrics were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. Scanning electron microscopy results revealed that spherical and uniform microcapsules were obtained with an approximate particle size of 2–6 µm. Differential scanning calorimetry results indicated that microencapsulated phase change material and the composite fabrics possessed significant melting enthalpies of 72.9 and 8.4–11.4 J/g, respectively, at peak melting temperatures between 21.6 and 22.8°C within human comfort temperature range. The utilization of coconut oil as a phase change material and the composite integration of this phase change material to a nonwoven fabric bring forward a novelty for future applications.


2017 ◽  
Vol 18 (3) ◽  
pp. 307 ◽  
Author(s):  
Petrica Turtoi ◽  
Traian Cicone ◽  
Aurelian Fatu

This paper presents the experimental determination of permeability for unidirectional in-plane flow through a thin layer of nonwoven porous textile subjected to various rates of compression. The experiments were made on an original device that allows the variation of porous layer compression and pressure differential. The permeability was calculated assuming the validity of Darcy law and, in parallel, Darcy-Forchheimer model. The preliminary results obtained with water show that pressure gradient does not influence sensibly the resistance to flow of the material and Darcy’s law is applicable. For permeability-porosity correlation the experimental results were fitted using the well-known Kozeny-Carman equation. Also good correlation was found with other two models derived from Kozeny-Carman.


Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6220
Author(s):  
Bethalihem Teferi Samuel ◽  
Marcin Barburski ◽  
Ewa Witczak ◽  
Izabela Jasińska

Noise pollution from the environment may wreak havoc on a person’s wellbeing. Numerous sound-absorbing materials are employed to address these issues, one of which is textile-woven fabrics. In this study, 12 woven textiles with four different weave structures (plain, rib, sateen, and twill) and those formed from three distinct polyester yarns were evaluated for their sound absorption properties using an impedance tube. The study was conducted within the range of 80–5000 (Hz) frequency. Part of the investigation was measuring different layers of woven fabrics under three different measuring conditions. Firstly, only woven fabrics were evaluated. Following that, woven and nonwoven textiles were measured. The third variant, in addition to the woven fabrics, included an air gap. In addition, this study includes tests and analyses of the effect of roughness and porosity of the fabric structure on the effectiveness of noise reduction by woven fabrics. The absorption capacity of plain fabric is higher at lower frequencies than other woven fabrics. Other weave structures noise reduction efficiency is higher as the frequency range increases. The absorption efficiency of plain fabric decreases with fabric layering. Utilizing woven fabric combined with nonwoven fabric reduces noise more effectively than the air gap variant. Low surface roughness and a highly porous surface of the fabric indicate a high noise reduction coefficient (NRC).


Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1627 ◽  
Author(s):  
Pavel Suchý ◽  
Alice Paprskářová ◽  
Marta Chalupová ◽  
Lucie Marholdová ◽  
Kristina Nešporová ◽  
...  

The achievement of rapid hemostasis represents a long-term trend in hemostatic research. Specifically, composite materials are now the focus of attention, based on the given issues and required properties. In urology, different materials are used to achieve fast and effective hemostasis. Additionally, it is desirable to exert a positive influence on local tissue reaction. In this study, three nonwoven textiles prepared by a wet spinning method and based on a combination of hyaluronic acid with either oxidized cellulose or carboxymethyl cellulose, along with the addition of etamsylate, were introduced and assessed in vivo using the rat partial nephrectomy model. A significantly shorter time to hemostasis in seconds (p < 0.05), was attributed to the effect of the carboxymethyl cellulose material. The addition of etamsylate did not noticeably contribute to further hemostasis, but its application strengthened the structure and therefore significantly improved the effect on local changes, while also facilitating any manipulation by the surgeons. Specifically, the hyaluronic acid supported the tissue healing and regeneration, and ensured the favorable results of the histological analysis. Moreover, the prepared textiles proved their bioresorbability after a three-day period. In brief, the fabrics yielded favorable hemostatic activity, bioresorbability, non-irritability, and had a beneficial effect on the tissue repair.


2017 ◽  
Vol 11 (22) ◽  
Author(s):  
Mónica Liliana Mejía Suaza ◽  
Nelson Javier Escobar Mora ◽  
Beatriz Janeth Galeano Upegui ◽  
Lina Marcela Hoyos Palacio ◽  
Diana Paola Cuesta Castro ◽  
...  

In hospital environments, there are several problems related to Healthcare-Associated Infections (HAIs), contaminated hospital textiles, can contribute to the spread and transmission of (HAIs), due to retention of viruses and bacteria. The antibacterial metallic nanoparticles immersed in hospital textiles can allow reduction  of microorganisms. This paper presents a technological surveillance of the principal properties of antibacterial nanotextiles to be used in hospital environments, based on international standards. Initially, the search equation was determined for “antibacterial” AND “nanoparticle.” Subsequently, the main properties were selected, by means of a multiple authors’ review. Afterwards, the properties were related to international standards. Finally, we present the results found associated to the materials used to develop nonwoven textiles, and their properties for hospital environments, the sizes of samples and also the equipment required for characterization.


AATCC Review ◽  
2018 ◽  
Vol 18 (5) ◽  
pp. 30-35
Author(s):  
Nicola Davies

2006 ◽  
Vol 920 ◽  
Author(s):  
Anuj Dhawan ◽  
John F. Muth ◽  
Dennis J. Kekas ◽  
Tushar K. Ghosh

AbstractBy incorporating optical fiber based devices into woven and non-woven fabrics, one can distribute these devices across large areas. In this work, novel fiber optic devices with nanofunctionality are developed by incorporating metallic and semiconducting films and nanoparticles inside the optical fibers. This is accomplished by first depositing the material of interest on the tip of the optical fiber, then overcoating the fiber with a protective layer of silicon dioxide before fusing this structure to an optical fiber. This results in a continuous fiber that can be woven, or placed into nonwoven textiles. In this study the incorporation of gold nanoparticles and vanadium oxide compounds into the core of optical fibers and an in-line Fabry-Perot sensor using these techniques are described.


2002 ◽  
Vol 26 (4-5) ◽  
pp. 243-246 ◽  
Author(s):  
R. Kozlowski ◽  
B. Mieleniak ◽  
M. Muzyczek ◽  
A. Kubacki
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document