Dynamic Responses of Jacket Foundation Offshore Wind Turbine Considering the Cyclic Loading Effects

2018 ◽  
pp. 451-458
Author(s):  
Wenjie Zhou ◽  
Zhen Guo ◽  
Lizhong Wang ◽  
Shenjie Rui
Keyword(s):  
Cyclic Loading ◽  
Wind Turbine ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Loading Effects

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

Permanent accumulated rotation of offshore wind turbine monopile due to typhoon-induced cyclic loading

2021 ◽  
Vol 80 ◽  
pp. 103079
Author(s):  
Hongwang Ma ◽  
Zhiyue Lu ◽  
Yutao Li ◽  
Chen Chen ◽  
Jun Yang
Keyword(s):  
Cyclic Loading ◽  
Wind Turbine ◽  
Offshore Wind ◽  
Offshore Wind Turbine

Study on the Dynamic Response for Floating Foundation of Offshore Wind Turbine

2011 ◽  
Author(s):  
Yougang Tang ◽  
Jun Hu ◽  
Liqin Liu
Keyword(s):  
Wind Turbine ◽  
Wind Farm ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wave Load ◽  
Mooring Lines ◽  
Floating Foundation ◽  
Wind Turbine System ◽  
Sea Area

The wind resources for ocean power generation are mostly distributed in sea areas with the distance of 5–50km from coastline, whose water depth are generally over 20m. To improve ocean power output and economic benefit of offshore wind farm, it is necessary to choose floating foundation for offshore wind turbine. According to the basic data of a 600kW wind turbine with a horizontal shaft, the tower, semi-submersible foundation and mooring system are designed in the 60-meter-deep sea area. Precise finite element models of the floating wind turbine system are established, including mooring lines, floating foundation, tower and wind turbine. Dynamic responses for the floating foundation of offshore wind turbine are investigated under wave load in frequency domain.

Experimental Investigation on the Dynamic Response of a Three Legged Articulated Type Offshore Wind Tower

2016 ◽  
Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Renewable Energy Sources ◽  
Offshore Structures ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Experimental Investigations ◽  
Offshore Wind Turbine ◽  
Ocean Engineering ◽  
Study Results

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.

scholarly journals Mooring Line Damping Estimation for a Floating Wind Turbine

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Dongsheng Qiao ◽  
Jinping Ou
Keyword(s):  
Wind Turbine ◽  
Estimation Method ◽  
Excitation Amplitude ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Scale Model ◽  
Mooring Line ◽  
Offshore Wind Turbine ◽  
Floating Wind Turbine ◽  
Excitation Period

The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

Global Responses and Loads Analysis of a 750-kW Semi-Submersible Floating Offshore Wind Turbine Under Extreme Environmental Conditions

2019 ◽  
Author(s):  
Thanh Dam Pham ◽  
Junbae Kim ◽  
Byoungcheon Seo ◽  
Rupesh Kumar ◽  
Youngjae Yu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Environmental Conditions ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
East Sea ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Scaled Model ◽  
Floating Offshore Wind Turbine ◽  
Extreme Loads

Abstract A pilot floating offshore wind turbine project of Korea was proposed for installing in the East Sea of Korea. The prototype is a semisubmersible platform supporting a 750-kW wind turbine. A scaled model was tested in the basin tank of the University of Ulsan at scale ratio 1:40. The 750-kW floating offshore wind turbine was modeled by using the NREL-FAST code. Numerical results were validated by comparing with those of the test model. This paper analyzes dynamic responses and loads of the wind turbine system under extreme environmental conditions. Extreme environmental conditions based on metocean data of East Sea Korea. Extreme responses and extreme loads are important data for designing the structure of the 750 kW semi-submersible floating offshore wind turbine.

Dynamic Responses of a Spar Type Floating Offshore Wind Turbine With Failed Moorings

2020 ◽  
Author(s):  
Yajun Ren ◽  
Vengatesan Venugopal
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Floating Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Platform Motions

Abstract The complex dynamic characteristics of Floating Offshore Wind Turbines (FOWTs) have raised wider consideration, as they are likely to experience harsher environments and higher instabilities than the bottom fixed offshore wind turbines. Safer design of a mooring system is critical for floating offshore wind turbine structures for station keeping. Failure of mooring lines may lead to further destruction, such as significant changes to the platform’s location and possible collisions with a neighbouring platform and eventually complete loss of the turbine structure may occur. The present study focuses on the dynamic responses of the National Renewable Energy Laboratory (NREL)’s OC3-Hywind spar type floating platform with a NREL offshore 5-MW baseline wind turbine under failed mooring conditions using the fully coupled numerical simulation tool FAST. The platform motions in surge, heave and pitch under multiple scenarios are calculated in time-domain. The results describing the FOWT motions in the form of response amplitude operators (RAOs) and spectral densities are presented and discussed in detail. The results indicate that the loss of the mooring system firstly leads to longdistance drift and changes in platform motions. The natural frequencies and the energy contents of the platform motion, the RAOs of the floating structures are affected by the mooring failure to different degrees.

scholarly journals A New Conceptual Design and Dynamic Analysis of a Spar-Type Offshore Wind Turbine Combined with a Moonpool

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3737 ◽  
Author(s):  
Thanh Dam Pham ◽  
Hyunkyoung Shin
Keyword(s):  
Wind Turbine ◽  
Bending Moment ◽  
Time Domain Analysis ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Operational Conditions ◽  
Floating Offshore Wind Turbines

Floating offshore wind turbines promise to provide an abundant source of energy. Currently, much attention is being paid to the efficient performance and the economics of floating wind systems. This paper aims to develop a spar-type platform to support a 5-MW reference wind turbine at a water depth of 150 m. The spar-type platform includes a moonpool at the center. The design optimization process is composed of three steps; the first step uses a spreadsheet to calculate the platform dimensions; the second step is a frequency domain analysis of the responses in wave conditions; and the final step is a fully coupled simulation time domain analysis to obtain the dynamic responses in combined wind, wave, and current conditions. By having a water column inside the open moonpool, the system’s dynamic responses to horizontal and rotating motions are significantly reduced. Reduction of these motions leads to a reduction in the nacelle acceleration and tower base bending moment. On the basic of optimization processes, a spar-type platform combined with a moonpool is suggested, which has good performance in both operational conditions and extreme conditions.

scholarly journals Dynamic Responses of a Jacket-Type Offshore Wind Turbine Using Decoupled and Coupled Models

2014 ◽  
Author(s):  
Muk Chen Ong ◽  
Erin E. Bachynski ◽  
Ole D. Økland ◽  
Elizabeth Passano
Keyword(s):  
Wind Turbine ◽  
Coupled Model ◽  
Dynamic Responses ◽  
Time Dependent ◽  
Offshore Wind ◽  
Wind Loads ◽  
Offshore Wind Turbine ◽  
Coupled Models ◽  
Thrust And Torque ◽  
Rotor Model

This paper presents numerical studies of the dynamic responses of a jacket-type offshore wind turbine using both decoupled and coupled models. In the decoupled (hydroelastic) model, the wind load is included through time-dependent forces and moments at a single node on the top of the tower. The coupled model is a hydro-servo-aero-elastic representation of the system. The investigated structure is the OC4 (Offshore Code Comparison Collaboration Continuation) jacket foundation supporting the NREL 5-MW wind turbine in a water depth of 50m. Different operational wind and wave loadings at an offshore site with relatively high soil stiffness are investigated. The objective of this study is to evaluate the applicability of the computationally efficient linear decoupled model by comparing with the results obtained from the nonlinear coupled model. Good agreement was obtained in the eigen-frequency analysis, decay tests, and wave-only simulations. In order to obtain good results in the combined wind and wave simulations, two different strategies were applied in the decoupled model, which are 1) Wind loads obtained from the coupled model were applied directly as time-dependent point loads in the decoupled model; and 2) The thrust and torque from an isolated rotor model were used as wind loads on the decoupled model together with a linear aerodynamic damper. It was found that, by applying the thrust force from an isolated rotor model in combination with linear damping, reasonable agreement could be obtained between the decoupled and coupled models in combined wind and wave simulations.

Sign in / Sign up

Export Citation Format

Share Document