AMRFLEX3D — Flow Simulation Using a Three-Dimensional Self-Adaptive, Structured Multi-Block Grid System

1996 ◽  
pp. 400-415 ◽  
Author(s):  
R. Hentschel ◽  
E. H. Hirschel
Keyword(s):  
Three Dimensional ◽  
Flow Simulation ◽  
Grid System ◽  
Self Adaptive

Assessment of Unsteady Flows in Turbines

1992 ◽  
Vol 114 (1) ◽  
pp. 79-90 ◽  
Author(s):  
O. P. Sharma ◽  
G. F. Pickett ◽  
R. H. Ni
Keyword(s):  
Unsteady Flow ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Experimental Investigations ◽  
Flow Parameters ◽  
Research Activities ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Turbine Design ◽  
The Impact

The impacts of unsteady flow research activities on flow simulation methods used in the turbine design process are assessed. Results from experimental investigations that identify the impact of periodic unsteadiness on the time-averaged flows in turbines and results from numerical simulations obtained by using three-dimensional unsteady Computational Fluid Dynamics (CFD) codes indicate that some of the unsteady flow features can be fairly accurately predicted. Flow parameters that can be modeled with existing steady CFD codes are distinguished from those that require unsteady codes.

Computation of Flow Through a Three-Dimensional Periodic Array of Porous Structures by a Parallel Immersed-Boundary Method

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
Zhenglun Alan Wei ◽  
Zhongquan Charlie Zheng ◽  
Xiaofan Yang
Keyword(s):  
Porous Media ◽  
Parallel Implementation ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Periodic Array ◽  
Immersed Boundary ◽  
Navier Stokes Equation ◽  
Flow Through ◽  
Ib Method

A parallel implementation of an immersed-boundary (IB) method is presented for low Reynolds number flow simulations in a representative elementary volume (REV) of porous media that are composed of a periodic array of regularly arranged structures. The material of the structure in the REV can be solid (impermeable) or microporous (permeable). Flows both outside and inside the microporous media are computed simultaneously by using an IB method to solve a combination of the Navier–Stokes equation (outside the microporous medium) and the Zwikker–Kosten equation (inside the microporous medium). The numerical simulation is firstly validated using flow through the REVs of impermeable structures, including square rods, circular rods, cubes, and spheres. The resultant pressure gradient over the REVs is compared with analytical solutions of the Ergun equation or Darcy–Forchheimer law. The good agreements demonstrate the validity of the numerical method to simulate the macroscopic flow behavior in porous media. In addition, with the assistance of a scientific parallel computational library, PETSc, good parallel performances are achieved. Finally, the IB method is extended to simulate species transport by coupling with the REV flow simulation. The species sorption behaviors in an REV with impermeable/solid and permeable/microporous materials are then studied.

Analysis of the effect of the size of three-dimensional micro-geometric structures on physical adhesion phenomena using microprint technique

2018 ◽  
Vol 41 (5) ◽  
pp. 277-283 ◽  
Author(s):  
Akiko Oota-Ishigaki ◽  
Toru Masuzawa ◽  
Kazuaki Nagayama
Keyword(s):  
Shear Rate ◽  
Secondary Flow ◽  
Thrombus Formation ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Quantitative Relationship ◽  
Bottom Surface ◽  
Material Surface ◽  
Computational Fluid Dynamics Analysis ◽  
Biomaterial Surfaces

Thrombus formation on biomaterial surfaces with microstructures is complex and not fully understood. We have studied the micro-secondary flow around microstructures that causes components of blood to adhere physically in a low Reynolds number region. The purpose of this study was to investigate the effect of micro-column size on the adhesion phenomena and show a quantitative relationship between the micro-secondary flow and physical adhesion phenomena, considering microstructures of various sizes. The flow simulation and quantitative assessment of adhesion rates around micro-columns was conducted using four sizes of micro-columns. This study also calculated the vectors of micro-secondary flow and average shear rate around a micro-column using a computational fluid dynamics analysis. The simulation showed the micro-secondary flow toward the bottom surface at upstream side and low shear rate distribution generated around a micro-column. Furthermore, physical adhesion tests were conducted using microbeads and a perfusion circuit to examine the size effect of the micro-columns on the physical adhesion. The results showed that the average adhesion rate around the micro-column increases with the associated size increase of the micro-column. Our results indicate that quantification of micro-secondary flow on a material surface with microstructures of several sizes and shapes (such as in a rough surface) is important for the evaluation of the adhesion phenomenon even though the surface roughness value on the material surface is small.

scholarly journals A Conceptual Framework for Integration Development of GSFLOW Model: Concerns and Issues Identified and Addressed for Model Development Efficiency

2018 ◽  
Author(s):  
Chao Chen ◽  
Sajjad Ahmad ◽  
Ajay Kalra
Keyword(s):  
Groundwater Flow ◽  
Conceptual Framework ◽  
Critical Role ◽  
Model Development ◽  
Three Dimensional ◽  
Data Communication ◽  
Flow Simulation ◽  
Creek Watershed ◽  
Surface Water Flow ◽  
Computation Algorithms

Abstract. In Coupled Groundwater and Surface-Water Flow (GSFLOW) model, the three-dimensional finite-difference groundwater model (MODFLOW) plays a critical role of groundwater flow simulation, together with which the Precipitation-Runoff Modeling System (PRMS) simulates the surface hydrologic processes. While the model development of each individual PRMS and MODFLOW model requires tremendous time and efforts, further integration development of these two models exerts additional concerns and issues due to different simulation realm, data communication, and computation algorithms. To address these concerns and issues in GSFLOW, the present paper proposes a conceptual framework from perspectives of: Model Conceptualization, Data Linkages and Transference, Model Calibration, and Sensitivity Analysis. As a demonstration, a MODFLOW groundwater flow system was developed and coupled with the PRMS model in the Lehman Creek watershed, eastern Nevada, resulting in a smooth and efficient integration as the hydrogeologic features were well captured and represented. The proposed conceptual integration framework with techniques and concerns identified substantially improves GSFLOW model development efficiency and help better model result interpretations. This may also find applications in other integrated hydrologic modelings.

scholarly journals Lattice Boltzmann simulation of liquid falling on horizontal rectangular pillar arrays

2021 ◽  
Vol 321 ◽  
pp. 01014
Author(s):  
Makoto Sugimoto ◽  
Tatsuya Miyazaki ◽  
Zelin Li ◽  
Masayuki Kaneda ◽  
Kazuhiko Suga
Keyword(s):  
Lattice Boltzmann ◽  
Three Dimensional ◽  
Phase Field Model ◽  
Flow Simulation ◽  
High Viscosity ◽  
Two Phase ◽  
Lattice Boltzmann Simulation ◽  
Pillar Arrays ◽  
Boltzmann Method ◽  
Behavior Characteristic

Stator coils of automobiles in operation generate heat and are cooled by a coolant poured from above. Since the behavior characteristic of the coolant poured on the coils is not clarified yet due to its complexity, the three-dimensional two-phase flow simulation is conducted. In this study, as a steppingstone to the simulation of the liquid falling on the actual coils, the coils are modelled with horizontal rectangular pillar arrays whose governing parameters can be easily changed. The two-phase flows are simulated using the lattice Boltzmann method and the phase-field model, and the effects of the governing parameters, such as the physical properties of the cooling liquid, the wettability, and the gap between the pillars, on the wetting area are investigated. The results show that the oil tends to spread across the pillars because of its high viscosity. Moreover, the liquid spreads quickly when the contact angle is small. In the case that the pillars are stacked, the wetting area of the inner pillars is larger than that of the exposed pillars.

Sequential vs Multidisciplinary Coupled Optimization and Efficient Surrogate Modelling of a Last Stage and the Successive Axial Radial Diffuser in a Low Pressure Steam Turbine

2014 ◽  
Author(s):  
Kevin Cremanns ◽  
Dirk Roos ◽  
Arne Graßmann
Keyword(s):  
Steam Turbine ◽  
Design Process ◽  
Energy Demand ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Low Pressure ◽  
Steam Turbines ◽  
Low Pressure Turbine ◽  
Pressure Steam ◽  
Last Stage

In order to meet the requirements of rising energy demand, one goal in the design process of modern steam turbines is to achieve high efficiencies. A major gain in efficiency is expected from the optimization of the last stage and the subsequent diffuser of a low pressure turbine (LP). The aim of such optimization is to minimize the losses due to separations or inefficient blade or diffuser design. In the usual design process, as is state of the art in the industry, the last stage of the LP and the diffuser is designed and optimized sequentially. The potential physical coupling effects are not considered. Therefore the aim of this paper is to perform both a sequential and coupled optimization of a low pressure steam turbine followed by an axial radial diffuser and subsequently to compare results. In addition to the flow simulation, mechanical and modal analysis is also carried out in order to satisfy the constraints regarding the natural frequencies and stresses. This permits the use of a meta-model, which allows very time efficient three dimensional (3D) calculations to account for all flow field effects.

Three-Dimensional Flow Simulation Research on Spur Dike

2013 ◽  
Vol 405-408 ◽  
pp. 799-802
Author(s):  
Hui Xu ◽  
Ming Zhang ◽  
Wan Qi Zhang
Keyword(s):  
Three Dimensional ◽  
Vertical Plane ◽  
Flow Simulation ◽  
Free Water ◽  
Three Dimensional Flow ◽  
Simulation Research ◽  
Spur Dike ◽  
Additional Layer ◽  
Large Coefficient ◽  
Coefficient Method

A three-dimensional (3D) flow mathematical model has been applied to simulate the flow field around spur dikes. In the vertical plane, the z-coordinate was adopted, and the additional layer was used to track the free water surface. The standard k-ε model was adopted, additionally, wall function and large coefficient method was applied to treat the boundary of the spur dike. Simulated results of velocity distribution, turbulent kinetic energy and its dissipation rate around the spur dike agree well with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document