Structure of Amorphous Carbon

2018 ◽  
pp. 195-272 ◽  
Author(s):  
Bernd Schultrich
Keyword(s):  
Amorphous Carbon

The Resolution and Contrast in Biological Sections Determined by Inelastic and Elastic Scattering

1973 ◽  
Vol 31 ◽  
pp. 224-225
Author(s):  
D. L. Misell
Keyword(s):  
Electron Microscopy ◽  
Adverse Effect ◽  
Elastic Scattering ◽  
Inelastic Scattering ◽  
Amorphous Carbon ◽  
Polymeric Materials ◽  
Chromatic Aberration ◽  
Image Resolution ◽  
Quantitative Estimates ◽  
Elastic Ratio

In the electron microscopy of biological sections the adverse effect of chromatic aberration on image resolution is well known. In this paper calculations are presented for the inelastic and elastic image intensities using a wave-optical formulation. Quantitative estimates of the deterioration in image resolution as a result of chromatic aberration are presented as an alternative to geometric calculations. The predominance of inelastic scattering in the unstained biological and polymeric materials is shown by the inelastic to elastic ratio, I/E, within an objective aperture of 0.005 rad for amorphous carbon of a thickness, t=50nm, typical of biological sections; E=200keV, I/E=16.

Observation of Atom Rows in Thorium Pyromellitate Using a Field Emission STEM

1977 ◽  
Vol 35 ◽  
pp. 80-81
Author(s):  
H. Todokoro ◽  
S. Nomura ◽  
T. Komoda
Keyword(s):  
Field Emission ◽  
Amorphous Carbon ◽  
Carbon Film ◽  
Dark Field Image ◽  
Dark Field ◽  
Amorphous Carbon Film ◽  
Atomic Size ◽  
Wide Range ◽  
A Chain

It is interesting to observe polymers at atomic size resolution. Some works have been reported for thorium pyromellitate by using a STEM (1), or a CTEM (2,3). The results showed that this polymer forms a chain in which thorium atoms are arranged. However, the distance between adjacent thorium atoms varies over a wide range (0.4-1.3nm) according to the different authors.The present authors have also observed thorium pyromellitate specimens by means of a field emission STEM, described in reference 4. The specimen was prepared by placing a drop of thorium pyromellitate in 10-3 CH3OH solution onto an amorphous carbon film about 2nm thick. The dark field image is shown in Fig. 1A. Thorium atoms are clearly observed as regular atom rows having a spacing of 0.85nm. This lattice gradually deteriorated by successive observations. The image changed to granular structures, as shown in Fig. 1B, which was taken after four scanning frames.

Electron-diffraction studies of amorphous carbon thin films

1993 ◽  
Vol 51 ◽  
pp. 1100-1101
Author(s):  
David A. Muller
Keyword(s):  
Thin Films ◽  
Electron Diffraction ◽  
Amorphous Carbon ◽  
Glassy Carbon ◽  
Spherical Structure ◽  
Local Ordering ◽  
Carbon Arc ◽  
Similar Appearance ◽  
Carbon Thin Films ◽  
Large Spherical

The sp2 rich amorphous carbons have a wide variety of microstructures ranging from flat sheetlike structures such as glassy carbon to highly curved materials having similar local ordering to the fullerenes. These differences are most apparent in the region of the graphite (0002) reflection of the energy filtered diffracted intensity obtained from these materials (Fig. 1). All these materials consist mainly of threefold coordinated atoms. This accounts for their similar appearance above 0.8 Å-1. The fullerene curves (b,c) show a string of peaks at distance scales corresponding to the packing of the large spherical and oblate molecules. The beam damaged C60 (c) shows an evolution to the sp2 amorphous carbons as the spherical structure is destroyed although the (220) reflection in fee fcc at 0.2 Å-1 does not disappear completely. This 0.2 Å-1 peak is present in the 1960 data of Kakinoki et. al. who grew films in a carbon arc under conditions similar to those needed to form fullerene rich soots.

Scanning Tunneling Microscopy of Amorphous Carbon Films

1990 ◽  
Vol 48 (1) ◽  
pp. 318-319
Author(s):  
Mircea Fotino ◽  
D.C. Parks
Keyword(s):  
Scanning Tunneling Microscopy ◽  
Amorphous Carbon ◽  
Carbon Films ◽  
Atomic Scale ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Amorphous Carbon Films ◽  
Image Optimization ◽  
Step Procedure ◽  
Stm Images

In the last few years scanning tunneling microscopy (STM) has made it possible and easily accessible to visualize surfaces of conducting specimens at the atomic scale. Such performance allows the detailed characterization of surface morphology in an increasing spectrum of applications in a wide variety of fields. Because the basic imaging process in STM differs fundamentally from its equivalent in other well-established microscopies, good understanding of the imaging mechanism in STM enables one to grasp the correct information content in STM images. It thus appears appropriate to explore by STM the structure of amorphous carbon films because they are used in many applications, in particular in the investigation of delicate biological specimens that may be altered through the preparation procedures.All STM images in the present study were obtained with the commercial instrument Nanoscope II (Digital Instruments, Inc., Santa Barbara, California). Since the importance of the scanning tip for image optimization and artifact reduction cannot be sufficiently emphasized, as stressed by early analyses of STM image formation, great attention has been directed toward adopting the most satisfactory tip geometry. The tips used here consisted either of mechanically sheared Pt/Ir wire (90:10, 0.010" diameter) or of etched W wire (0.030" diameter). The latter were eventually preferred after a two-step procedure for etching in NaOH was found to produce routinely tips with one or more short whiskers that are essentially rigid, uniform and sharp (Fig. 1) . Under these circumstances, atomic-resolution images of cleaved highly-ordered pyro-lytic graphite (HOPG) were reproducibly and readily attained as a standard criterion for easily recognizable and satisfactory performance (Fig. 2).

Assessment of Amorphous Carbon Coating for Artificial Joints Application

2005 ◽  
Vol 48 (2) ◽  
pp. 190-198 ◽  
Author(s):  
O. O. Ajayi ◽  
B. Shi ◽  
M. J. Soppet ◽  
A. Erdemir ◽  
H. Liang ◽  
...  
Keyword(s):  
Amorphous Carbon ◽  
Carbon Coating ◽  
Artificial Joints

Deposition of Hydrophilic Amorphous Carbon Film with Ether as a Source Molecule and Analysis of its Deposition Reaction

2018 ◽  
Vol 138 (11) ◽  
pp. 538-543
Author(s):  
Masanori Shinohara ◽  
Taisuke Tominaga ◽  
Hayato Shimomura ◽  
Takeshi Ihara ◽  
Yoshihito Yagyu ◽  
...  
Keyword(s):  
Amorphous Carbon ◽  
Carbon Film ◽  
Amorphous Carbon Film

Formation of Nanostructured Coating Based on the Amorphous Carbon Matrix and Silver Nanocrystallites

2016 ◽  
Vol 8 (4(1)) ◽  
pp. 04019-1-04019-6 ◽  
Author(s):  
A. Ya. Kolpakov ◽  
◽  
A. I. Poplavsky ◽  
S. S. Manokhin ◽  
M. E. Galkina ◽  
...  
Keyword(s):  
Amorphous Carbon ◽  
Carbon Matrix ◽  
Nanostructured Coating
Sign in / Sign up

Export Citation Format

Share Document