Sustainable Development, Agricultural Practices and the Use of Plant Protection Products

1998 ◽  
pp. 127-138
Author(s):  
Monika Herrchen ◽  
Werner Klein
Keyword(s):  
Sustainable Development ◽  
Plant Protection ◽  
Agricultural Practices ◽  
Plant Protection Products

Comparative Advantage of Using Biopesticides in Ukrainian Agroecosystems

2020 ◽  
Vol 2 (6) ◽  
Author(s):  
Hasrat Arjjumend ◽  
Konstantia Koutouki ◽  
Olga Donets
Keyword(s):  
Shelf Life ◽  
Crop Production ◽  
Plant Protection ◽  
Agricultural Practices ◽  
Crop Productivity ◽  
Poor Quality ◽  
Soil Biology ◽  
Chemical Contamination ◽  
High Concentration ◽  
Irreversible Damage

The use of unsustainable levels of chemical fertilizers and plant protection chemicals has resulted in a steady decline in soil and crop productivity the world over. Soil biology has undergone irreversible damage, coupled with a high concentration of toxic chemical residues in plant tissues and human bodies. Agricultural practices must evolve to sustainably meet the growing global demand for food without irreversibly damaging soil. Microbial biocontrol agents have tremendous potential to bring sustainability to agriculture in a way that is safe for the environment. Biopesticides do not kill non-target insects, and biosafety is ensured because biopesticides act as antidotes and do not lead to chemical contamination in the soil. This article is part of a larger study conducted in Ukraine by researchers at the Université de Montréal with the support of Mitacs and Earth Alive Clean Technologies. The responses of farmers who use biofertilizers (“user farmers”) and those who do not (“non-user farmers”), along with the responses of manufacturers or suppliers of biofertilizers, and research and development (R&D) scientists are captured to demonstrate the advantages of applying microbial biopesticides to field crops. Participants reported a 15-30% increase in yields and crop production after the application of biopesticides. With the use of biopesticides, farmers cultivated better quality fruits, grains, and tubers with a longer shelf life. Moreover, while the risk of crop loss remains high (60-70%) with chemically grown crops, this risk is reduced to 33% on average if crops are grown using biopesticides. The findings indicate that a large proportion of farmers would prefer to use biopesticides if they are effective and high quality products. In this context, the quality and effectiveness of products is therefore very important. Despite their benefits to soil, human health, and ecosystems, biopesticides face significant challenges and competition vis-à-vis synthetic pesticides for a variety of reasons. Therefore, the development of biopesticides must overcome the problems of poor quality products, short shelf life, delayed action, high market costs, and legal/registration issues.

scholarly journals Effect of the Application Date of Fertilizer Containing Silicon and Potassium on the Yield and Technological Quality of Sugar Beet Roots

Plants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 370
Author(s):  
Arkadiusz Artyszak ◽  
Dariusz Gozdowski ◽  
Alicja Siuda
Keyword(s):  
Sugar Beet ◽  
Foliar Application ◽  
Plant Protection ◽  
Plant Protection Products ◽  
Water Shortage ◽  
The European Union ◽  
Yield Increase ◽  
Time Of Application ◽  
Technological Quality

Water shortage and drought are a growing problem in Europe. Therefore, effective methods for limiting its effects are necessary. At the same time, the “field to fork” strategy adopted by the European Commission aims to achieve a significant reduction in the use of plant protection products and fertilizers in the European Union. In an experiment conducted in 2018–2020, the effect of the method of foliar fertilization containing silicon and potassium on the yield and technological quality of sugar beet roots was assessed. The fertilizer was used in seven combinations, differing in the number and time of application. The best results were obtained by treating plants during drought stress. The better soil moisture for the plants, the smaller the pure sugar yield increase was observed. It is difficult to clearly state which combination of silicon and potassium foliar application is optimal, as their effects do not differ greatly.

scholarly journals The Role of Source‐sink Dynamics in the Assessment of Risk to Non‐target Arthropods from the Use of Plant Protection Products

2021 ◽  
Author(s):  
Gavin Lewis ◽  
Axel Dinter ◽  
Charlotte Elston ◽  
Michael Thomas Marx ◽  
Christoph Julian Mayer ◽  
...  
Keyword(s):  
Plant Protection ◽  
Plant Protection Products ◽  
Source Sink

Measurements of the dermal exposure to bystanders from direct off‐crop drift during the application of plant protection products

2021 ◽  
Author(s):  
Christian J. Kuster ◽  
Nicola J. Hewitt ◽  
Clare Butler Ellis ◽  
Christian Timmermann ◽  
Thomas Anft
Keyword(s):  
Plant Protection ◽  
Plant Protection Products ◽  
Dermal Exposure

scholarly journals Field assessment of a pulse width modulation (PWM) spray system applying different spray volumes: duty cycle and forward speed effects on vines spray coverage

2021 ◽  
Author(s):  
Marco Grella ◽  
Fabrizio Gioelli ◽  
Paolo Marucco ◽  
Ingrid Zwertvaegher ◽  
Eric Mozzanini ◽  
...  
Keyword(s):  
Precision Agriculture ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Plant Protection ◽  
Plant Protection Products ◽  
Field Conditions ◽  
Advanced Technology ◽  
Real Field ◽  
Spray Application ◽  
Spray System

AbstractThe pulse width modulation (PWM) spray system is the most advanced technology to obtain variable rate spray application without varying the operative sprayer parameters (e.g. spray pressure, nozzle size). According to the precision agriculture principles, PWM is the prime technology that allows to spray the required amount where needed without varying the droplet size spectra which benefits both the uniformity of spray quality and the spray drift reduction. However, some concerns related to the effect of on–off solenoid valves and the alternating on/off action of adjacent nozzles on final uneven spray coverage (SC) have arisen. Further evaluations of PWM systems used for spraying 3D crops under field conditions are welcomed. A tower-shaped airblast sprayer equipped with a PWM was tested in a vineyard. Twelve configurations, combining duty cycles (DC: 30, 50, 70, 100%) and forward speeds (FS: 4, 6, 8 km h−1), were tested. Two methodologies, namely field-standardized and real field conditions, were adopted to evaluate the effect of DC and FS on (1) SC variability (CV%) along both the sprayer travel direction and the vertical spray profile using long water sensitive papers (WSP), and (2) SC uniformity (IU, index value) within the canopy at different depths and heights, respectively. Furthermore, the SC (%) and deposit density (Nst, no stains cm−2), determined using short WSP, were used to evaluate the spray application performances taking into account the spray volumes applied. Under field-controlled conditions, the pulsing of the PWM system affects both the SC variability measured along the sprayer travel direction and along the vertical spray profile. In contrast, under real field conditions, the PWM system does not affect the uniformity of SC measured within the canopy. The relationship between SC and Nst allowed identification of the ranges of 200–250 and 300–370 l ha−1 as the most suitable spray volumes to be applied for insecticide and fungicide plant protection products, respectively.

Sign in / Sign up

Export Citation Format

Share Document