Sea Spray Production and Influence on Air-sea Heat And Moisture Fluxes over the Open Ocean

1999 ◽  
pp. 327-362 ◽  
Author(s):  
Edgar L. Andreas ◽  
Janice Decosmo
Keyword(s):  
Open Ocean ◽  
Sea Spray ◽  
Moisture Fluxes ◽  
Heat And Moisture

scholarly journals Investigating the Local Atmospheric Response to a Realistic Shift in the Oyashio Sea Surface Temperature Front

2015 ◽  
Vol 28 (3) ◽  
pp. 1126-1147 ◽  
Author(s):  
Dimitry Smirnov ◽  
Matthew Newman ◽  
Michael A. Alexander ◽  
Young-Oh Kwon ◽  
Claude Frankignoul
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Lower Troposphere ◽  
Vertical Motion ◽  
Atmospheric Response ◽  
Transient Eddy ◽  
Sst Front ◽  
Moisture Fluxes ◽  
Upper Level ◽  
Heat And Moisture

Abstract The local atmospheric response to a realistic shift of the Oyashio Extension SST front in the western North Pacific is analyzed using a high-resolution (HR; 0.25°) version of the global Community Atmosphere Model, version 5 (CAM5). A northward shift in the SST front causes an atmospheric response consisting of a weak surface wind anomaly but a strong vertical circulation extending throughout the troposphere. In the lower troposphere, most of the SST anomaly–induced diabatic heating is balanced by poleward transient eddy heat and moisture fluxes. Collectively, this response differs from the circulation suggested by linear dynamics, where extratropical SST forcing produces shallow anomalous heating balanced by strong equatorward cold air advection driven by an anomalous, stationary surface low to the east. This latter response, however, is obtained by repeating the same experiment except using a relatively low-resolution (LR; 1°) version of CAM5. Comparison to observations suggests that the HR response is closer to nature than the LR response. Strikingly, HR and LR experiments have almost identical vertical profiles of . However, diagnosis of the diabatic quasigeostrophic vertical pressure velocity (ω) budget reveals that HR has a substantially stronger response, which together with upper-level mean differential thermal advection balances stronger vertical motion. The results herein suggest that changes in transient eddy heat and moisture fluxes are critical to the overall local atmospheric response to Oyashio Front anomalies, which may consequently yield a stronger downstream response. These changes may require the high resolution to be fully reproduced, warranting further experiments of this type with other high-resolution atmosphere-only and fully coupled GCMs.

scholarly journals Effects of Vertical Eddy Diffusivity Parameterization on the Evolution of Landfalling Hurricanes

2017 ◽  
Vol 74 (6) ◽  
pp. 1879-1905 ◽  
Author(s):  
Feimin Zhang ◽  
Zhaoxia Pu
Keyword(s):  
Boundary Layer ◽  
Vertical Mixing ◽  
Eddy Diffusivity ◽  
Essential Components ◽  
Moisture Fluxes ◽  
Layer Velocity ◽  
Hurricane Boundary Layer ◽  
Heat And Moisture ◽  
Vertical Eddy Diffusivity ◽  
Vertical Eddy

Abstract As a result of rapid changes in surface conditions when a landfalling hurricane moves from ocean to land, interactions between the hurricane and surface heat and moisture fluxes become essential components of its evolution and dissipation. With a research version of the Hurricane Weather Research and Forecasting Model (HWRF), this study examines the effects of the vertical eddy diffusivity in the boundary layer on the evolution of three landfalling hurricanes (Dennis, Katrina, and Rita in 2005). Specifically, the parameterization scheme of eddy diffusivity for momentum Km is adjusted with the modification of the mixed-layer velocity scale in HWRF for both stable and unstable conditions. Results show that the change in the Km parameter leads to improved simulations of hurricane track, intensity, and quantitative precipitation against observations during and after landfall, compared to the simulations with the original Km. Further diagnosis shows that, compared to original Km, the modified Km produces stronger vertical mixing in the hurricane boundary layer over land, which tends to stabilize the hurricane boundary layer. Consequently, the simulated landfalling hurricanes attenuate effectively with the modified Km, while they mostly inherit their characteristics over the ocean and decay inefficiently with the original Km.

scholarly journals The Influence of the Barrier Layer on SST Response during Tropical Cyclone Wind Forcing Using Idealized Experiments

2018 ◽  
Vol 48 (7) ◽  
pp. 1471-1478 ◽  
Author(s):  
Johna E. Rudzin ◽  
Lynn K. Shay ◽  
William E. Johns
Keyword(s):  
Mixed Layer ◽  
Barrier Layer ◽  
Wind Forcing ◽  
Upper Ocean ◽  
Salinity Stratification ◽  
Sst Cooling ◽  
Temperature Regimes ◽  
Moisture Fluxes ◽  
Upper Ocean Response ◽  
Heat And Moisture

AbstractMultiple studies have shown that reduced sea surface temperature (SST) cooling occurs under tropical cyclones (TCs) where a fresh surface layer and subsurface halocline exist. Reduced SST cooling in these scenarios has been attributed to a barrier layer, an upper-ocean feature in the tropical global oceans in which a halocline resides within the isothermal mixed layer. Because upper-ocean stratification theoretically reduces ocean mixing induced by winds, the barrier layer is thought to reduce SST cooling during TC passage, sustaining heat and moisture fluxes into the storm. This research examines how both the inclusion of salinity and upper-ocean salinity stratification influences SST cooling for a variety of upper-ocean thermal regimes using one-dimensional (1D) ocean mixed layer (OML) models. The Kraus–Turner, Price–Weller–Pinkel, and Pollard–Rhines–Thompson 1D OML schemes are used to examine SST cooling and OML deepening during 30 m s−1 wind forcing (~category 1 TC) for both temperature-only and temperature–salinity stratification cases. Generally, the inclusion of salinity (a barrier layer) reduces SST cooling for all temperature regimes. However, results suggest that SST cooling sensitivities exist depending on thermal regime, salinity stratification, and the 1D OML model used. Upper-ocean thermal and haline characteristics are put into context of SST cooling with the creation of a barrier layer baroclinic wave speed to emphasize the influence of salinity stratification on upper-ocean response under TC wind forcing.

Pan-Arctic surface ozone seasonality modified by sea-ice-sourced bromine: modelling vs measurements

2021 ◽  
Author(s):  
Xin Yang ◽  
Anne-M Blechschmidt2 ◽  
Kristof Bognar ◽  
Audra McClure–Begley ◽  
Sara Morris ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Sea Ice ◽  
Surface Ozone ◽  
Open Ocean ◽  
Arctic Sea Ice ◽  
The Arctic ◽  
Sea Spray ◽  
Research Station ◽  
Blowing Snow ◽  
Model Control

<p>Within the framework of the International Arctic Systems for Observing the Atmosphere (IASOA), we report a modelling-based study on surface ozone across the Arctic. We use surface ozone from six sites: Summit (Greenland), Pallas (Finland), Barrow (USA), Alert (Canada), Tiksi (Russia), and Villum Research Station (VRS) at Station Nord (North Greenland, Danish Realm), and ozonesonde data from three Canadian sites: Resolute, Eureka, and Alert. Two global chemistry models: a global chemistry transport model (p-TOMCAT) and a global chemistry climate model (UKCA), are used for model-data comparisons. Remotely sensed data of BrO from the GOME-2 satellite instrument at Eureka, Canada are used for model validation.</p><p>The observed climatology data show that spring surface ozone at coastal Arctic is heavily depleted, making ozone seasonality at Arctic coastal sites distinctly different from that at inland sites. Model simulations show that surface ozone can be greatly reduced by bromine chemistry. In April, bromine chemistry can cause a net ozone loss (monthly mean) of 10-20 ppbv, with almost half attributable to open-ocean-sourced bromine and the rest to sea-ice-sourced bromine. However, the open-ocean-sourced bromine, via sea spray bromide depletion, cannot by itself produce ozone depletion events (ODEs) (defined as ozone volume mixing ratios VMRs < 10 ppbv). In contrast, sea-ice-sourced bromine, via sea salt aerosol (SSA) production from blowing snow, can produce ODEs even without bromine from sea spray, highlighting the importance of sea ice surface in polar boundary layer chemistry.</p><p>Modelled total inorganic bromine (Br<sub>Y</sub>) over the Arctic sea ice  is sensitive to model configuration, e.g., under the same bromine loading, Br<sub>Y</sub> in the Arctic spring boundary layer in the p-TOMCAT control run (i.e., with all bromine emissions) can be 2 times that in the UKCA control run. Despite the model differences, both model control runs can successfully reproduce large bromine explosion events (BEEs) and ODEs in polar spring. Model-integrated tropospheric column BrO generally matches GOME-2 tropospheric columns within ~50% in UKCA and a factor of 2 in p-TOMCAT. The success of the models in reproducing both ODEs and BEEs in the Arctic indicates that the relevant parameterizations implemented in the models work reasonably well, which supports the proposed mechanism of SSA production and bromide release on sea ice. Given that sea ice is a large source of SSA and halogens, changes in sea ice type and extent in a warming climate will influence Arctic boundary layer chemistry, including the oxidation of atmospheric elemental mercury. Note that this work dose not necessary rule out other possibilities that may act as a source of reactive bromine from sea ice zone.</p>

scholarly journals Dry Intrusions: Lagrangian Climatology and Dynamical Impact on the Planetary Boundary Layer

2017 ◽  
Vol 30 (17) ◽  
pp. 6661-6682 ◽  
Author(s):  
Shira Raveh-Rubin
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Potential Temperature ◽  
Storm Track ◽  
Lower Troposphere ◽  
Western Coast ◽  
Moisture Fluxes ◽  
Quantitative Understanding ◽  
America South ◽  
Heat And Moisture

Dry-air intrusions (DIs) are dry, deeply descending airstreams from the upper troposphere toward the planetary boundary layer (PBL). The significance of DIs spans a variety of aspects, including the interaction with convection, extratropical cyclones and fronts, the PBL, and extreme surface weather. Here, a Lagrangian definition for DI trajectories is used and applied to ECMWF interim reanalysis (ERA-Interim) data. Based on the criterion of a minimum descent of 400 hPa during 48 h, a first global Lagrangian climatology of DI trajectories is compiled for the years 1979–2014, allowing quantitative understanding of the occurrence and variability of DIs, as well as the dynamical and thermodynamical interactions that determine their impact. DIs occur mainly in winter. While traveling equatorward from 40°–50° latitude, DIs typically reach the lower troposphere (with maximum frequencies of ~10% in winter) in the storm-track regions, as well as over the Mediterranean Sea, Arabian Sea, and eastern North Pacific, off the western coast of South America, South Africa, and Australia, and across the Antarctic coast. The DI descent is nearly adiabatic, with a mean potential temperature decrease of 3 K in two days. Relative humidity drops strongly during the first descent day and increases in the second day, because of mixing into the moist PBL. Significant destabilization of the lower levels occurs beneath DIs, accompanied by increased 10-m wind gusts, intense surface heat and moisture fluxes, and elevated PBL heights. Interestingly, only 1.2% of all DIs are found to originate from the stratosphere.

The impact of aerosols on heat and moisture fluxes above wind waves

1999 ◽  
Vol 30 ◽  
pp. S181-S182 ◽  
Author(s):  
J.F. Meirink ◽  
V.K. Makin ◽  
A.M.J. van Eijk ◽  
V.N. Kudryavtsev
Keyword(s):  
Wind Waves ◽  
Moisture Fluxes ◽  
Heat And Moisture ◽  
The Impact
Sign in / Sign up

Export Citation Format

Share Document