Elastic-Plastic Rolling Contact Problems with Graded Materials and Heat Exchange

2017 ◽  
pp. 147-163 ◽  
Author(s):  
Andrzej Myśliński
Keyword(s):  
Heat Exchange ◽  
Contact Problems ◽  
Rolling Contact ◽  
Graded Materials ◽  
Elastic Plastic

scholarly journals The Indentation Rolling Resistance in Belt Conveyors: A Model for the Viscoelastic Friction

Lubricants ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 58 ◽  
Author(s):  
Nicola Menga ◽  
Francesco Bottiglione ◽  
Giuseppe Carbone
Keyword(s):  
Contact Problem ◽  
Finite Thickness ◽  
Numerical Procedure ◽  
Contact Problems ◽  
Accurate Solution ◽  
Rolling Contact ◽  
Viscoelastic Layer ◽  
Force Coefficient ◽  
Belt Conveyors ◽  
Energy Dissipated

In this paper, we study the steady-state rolling contact of a linear viscoelastic layer of finite thickness and a rigid indenter made of a periodic array of equally spaced rigid cylinders. The viscoelastic contact model is derived by means of Green’s function approach, which allows solving the contact problem with the sliding velocity as a control parameter. The contact problem is solved by means of an accurate numerical procedure developed for general two-dimensional contact geometries. The effect of geometrical quantities (layer thickness, cylinders radii, and cylinders spacing), material properties (viscoelastic moduli, relaxation time) and operative conditions (load, velocity) are all investigated. Physical quantities typical of contact problems (contact areas, deformed profiles, etc.) are calculated and discussed. Special emphasis is dedicated to the viscoelastic friction force coefficient and to the energy dissipated per unit time. The discussion is focused on the role played by the deformation localized at the contact spots and the one in the bulk of the thin layer, due to layer bending. The model is proposed as an accurate solution for engineering applications such as belt conveyors, in which the energy dissipated on the rolling contact of idle rollers can, in some cases, be by far the most important contribution to their energy consumption.

A Coupled Multibody Finite Element Model for Investigating Effects of Surface Defects on Rolling Contact Fatigue

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Zamzam Golmohammadi ◽  
Farshid Sadeghi
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Surface Defects ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Internal Stresses ◽  
Fe Model ◽  
Elastic Plastic ◽  
Pile Up

A coupled multibody elastic–plastic finite element (FE) model was developed to investigate the effects of surface defects, such as dents on rolling contact fatigue (RCF). The coupled Voronoi FE model was used to determine the contact pressure acting over the surface defect, internal stresses, damage, etc. In order to determine the shape of a dent and material pile up during the over rolling process, a rigid indenter was pressed against an elastic plastic semi-infinite domain. Continuum damage mechanics (CDM) was used to account for material degradation during RCF. Using CDM, spall initiation and propagation in a line contact was modeled and investigated. A parametric study using the model was performed to examine the effects of dent sharpness, pile up ratio, and applied load on the spall formation and fatigue life. The spall patterns were found to be consistent with experimental observations from the open literature. Moreover, the results demonstrated that the dent shape and sharpness had a significant effect on pressure and thus fatigue life. Higher dent sharpness ratios significantly reduced the fatigue life.

An Elastic-Plastic Finite Element Model of Rolling Contact, Part 2: Analysis of Repeated Contacts

1985 ◽  
Vol 52 (1) ◽  
pp. 75-82 ◽  
Author(s):  
V. Bhargava ◽  
G. T. Hahn ◽  
C. A. Rubin
Keyword(s):  
Finite Element ◽  
Shear Strain ◽  
Element Model ◽  
Rolling Contact ◽  
Elastic Plastic ◽  
Perfectly Plastic ◽  
Rolling Contacts ◽  
Elastic Perfectly Plastic ◽  
Multiple Translations ◽  
Contact Part

This paper presents finite element analyses of two-dimensional (plane strain), elastic-plastic, repeated, frictionless rolling contact. The analysis employs the elastic-perfectly plastic, cycle and strain-amplitude-independent material used in the Merwin and Johnson analysis but avoids several assumptions made by these workers. Repeated rolling contacts are simulated by multiple translations of a semielliptical Hertzian pressure distribution. Results at p0/k = 3.5, 4.35, and 5.0 are compared to the Merwin and Johnson prediction. Shakedown is observed at p0/k = 3.5, but the comparisons reveal significant differences in the amount and distribution of residual shear strain and forward flow at p0/k = 4.35 and p0/k = 5.0. The peak incremental, shear strain per cycle for steady state is five times the value calculated by Merwin and Johnson, and the plastic strain cycle is highly nonsymmetric.

On the Singularities in Fracture and Contact Mechanics

2008 ◽  
Vol 75 (5) ◽  
Author(s):  
Fazil Erdogan ◽  
Murat Ozturk
Keyword(s):  
Contact Mechanics ◽  
Integral Equations ◽  
Mixed Boundary ◽  
Complex Function ◽  
Three Dimensional ◽  
Contact Problems ◽  
Cauchy Kernel ◽  
Square Root ◽  
Complex Function Theory ◽  
Graded Materials

Generally, the mixed boundary value problems in fracture and contact mechanics may be formulated in terms of integral equations. Through a careful asymptotic analysis of the kernels and by separating nonintegrable singular parts, the unique features of the unknown functions can then be recovered. In mechanics and potential theory, a characteristic feature of these singular kernels is the Cauchy singularity. In the absence of other nonintegrable kernels, Cauchy kernel would give a square-root or conventional singularity. On the other hand, if the kernels contain, in addition to a Cauchy singularity, other nonintegrable singular terms, the application of the complex function theory would show that the solution has a non-square-root or unconventional singularity. In this article, some typical examples from crack and contact mechanics demonstrating unique applications of such integral equations will be described. After some remarks on three-dimensional singularities, the key examples considered will include the generalized Cauchy kernels, membrane and sliding contact mechanics, coupled crack-contact problems, and crack and contact problems in graded materials.

Sign in / Sign up

Export Citation Format

Share Document