Neural Network for Performance Prediction of Biogas Production from Municipal Solid Wastes

Author(s):  
Amar Kumar Das ◽  
Saroja Kumar Rout ◽  
Sujit Kumar Panda
2008 ◽  
Author(s):  
Baoning Zhu ◽  
Ruihong Zhang ◽  
Petros Gikas ◽  
Joshua Rapport ◽  
Bryan Jenkins ◽  
...  

Molecules ◽  
2018 ◽  
Vol 23 (12) ◽  
pp. 3146 ◽  
Author(s):  
Przemysław Seruga ◽  
Małgorzata Krzywonos ◽  
Marta Wilk

Anaerobic digestion (AD) has been used widely as a form of energy recovery by biogas production from the organic fraction of municipal solid wastes (OFMSW). The aim of this study was to evaluate the effect of the introduction of co-substrates (restaurant wastes, corn whole stillage, effluents from the cleaning of chocolate transportation tanks) on the thermophilic anaerobic digestion process of the mechanically separated organic fraction of municipal solid wastes in a full-scale mechanical-biological treatment (MBT) plant. Based on the results, it can be seen that co-digestion might bring benefits and process efficiency improvement, compared to mono-substrate digestion. The 15% addition of effluents from the cleaning of chocolate transportation tanks resulted in an increase in biogas yield by 31.6%, followed by a 68.5 kWh electricity production possibility. The introduction of 10% corn stillage as the feedstock resulted in a biogas yield increase by 27.0%. The 5% addition of restaurant wastes contributed to a biogas yield increase by 21.8%. The introduction of additional raw materials, in fixed proportions in relation to the basic substrate, increases biogas yield compared to substrates with a lower content of organic matter. In regard to substrates with high organic loads, such as restaurant waste, it allows them to be digested. Therefore, determining the proportion of different feedstocks to achieve the highest efficiency with stability is necessary.


2009 ◽  
Vol 100 (3) ◽  
pp. 1122-1129 ◽  
Author(s):  
Baoning Zhu ◽  
Petros Gikas ◽  
Ruihong Zhang ◽  
James Lord ◽  
Bryan Jenkins ◽  
...  

2016 ◽  
Vol 38 (11) ◽  
pp. 1342-1350 ◽  
Author(s):  
A. Alvarado-Lassman ◽  
J. M. Méndez-Contreras ◽  
A. Martínez-Sibaja ◽  
E. S. Rosas-Mendoza ◽  
N. A. Vallejo-Cantú

2021 ◽  
Vol 23 (11) ◽  
pp. 153-158
Author(s):  
Mahmood Ajel ◽  
◽  
Fawziea M. Hussien ◽  
Johain J. Faraj ◽  
◽  
...  

Present work deals with the exhaustive investigations of rapid de-lignification processes from source-sorted organic fractions that are recalcitrant in nature. Organic solid wastes (OSW) belong to the organic fraction of municipal solid wastes (MSW) and they act as enormous potential substrate for alternative source of energy in the form of bio-fuels. Nevertheless, these substrates are not easily biodegradable and the degree of biodegradability is solely dependent on the composition and characteristic of organic solid wastes in municipal solid wastes. The component responsible for recalcitrance of organic solid wastes is lignin that occurs in variable amounts in different plant residues. In order to remove the recalcitrance from organic fraction municipal solid wastes and to make it more easily degradable by microbial groups, certain pretreatment techniques have been adopted and they are applied either individually or in combined way for enhancement of anaerobic digestion (AD) process. The present work studied the effect of acid treatment with acetic acid on the used substrate, evaluated its effectiveness on biogas production, and studied the concentrations of CH4 and CO2 during the fermentation period, which amounted to 90 days. All results are presented in clear curves for the purpose of facilitating the study.


2008 ◽  
Vol 136 ◽  
pp. S671-S672
Author(s):  
Baoning Zhu ◽  
Ruihong Zhang ◽  
Petros Gikas ◽  
Joshua Rapport ◽  
Bryan Jenkins ◽  
...  

2015 ◽  
Vol 14 (7) ◽  
pp. 1623-1636 ◽  
Author(s):  
Alberto Godio ◽  
Alessandro Arato ◽  
Fulvia Chiampo ◽  
Bernardo Ruggeri ◽  
Martina Di Addario ◽  
...  

2010 ◽  
Vol 101 (16) ◽  
pp. 6374-6380 ◽  
Author(s):  
Baoning Zhu ◽  
Ruihong Zhang ◽  
Petros Gikas ◽  
Joshua Rapport ◽  
Bryan Jenkins ◽  
...  

2020 ◽  
Vol 5 (4) ◽  
pp. 202-209
Author(s):  
Alexander Topal ◽  
◽  
Iryna Holenko ◽  
Luidmyla Haponych ◽  
◽  
...  

For the municipal solid waste (MSW) to be used in a proper way, it is necessary to implement clean technologies capable of thermal treatment of MSW and RDF in order to produce heat and electricity while meeting current ecological requirements. Nowadays, a number of technologies for MSW/RDF thermal treating are being used worldwide. Among them, the most proven technologies, applicable for industrial introduction, have been considered while analyzing their advantages/ disadvantages accounting for local conditions of Ukraine.


1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.


Sign in / Sign up

Export Citation Format

Share Document