Inkjet Printed Conductive Pattern and Closed Loop Flash Sintering for Microstrip Antenna

Author(s):  
Fanbo Meng ◽  
Jin Huang
Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 258 ◽  
Author(s):  
Fanbo Meng ◽  
Jin Huang

Flash sintering is the most promising sintering method because of its high speed and large area of effect. However, current flash sintering processes exhibit poor stability and the conductive pattern surface is highly susceptible to damage during this process. Therefore, a sintering parameter prediction system must be established to optimize sintering parameters for manufacturing. In this study, a photon-sintered nano-silver particle model is proposed for studying the sintering characteristics of metal nanoparticles. The temperature field of the sintering area is obtained using the heat transfer formula and the sintered neck state, and the conductive pattern density of the nano-silver particles are obtained by employing the fluid dynamics finite element method. The conductive pattern’s structural density and conductivity are determined using the electronic state density and potential distribution of the crystal structure. The sintering state is then predicted based on the sintering parameters. The simulation results are consistent with conductive patterns corresponding to different sintering degrees observed using an electron microscope. The results of this study provide reference sintering parameters for flash sintering with effective cost reduction.


1961 ◽  
Vol 41 (3) ◽  
pp. 245-250 ◽  
Author(s):  
George H. Bornside ◽  
Isidore Cohn
Keyword(s):  

2012 ◽  
Vol 220 (1) ◽  
pp. 3-9 ◽  
Author(s):  
Sandra Sülzenbrück

For the effective use of modern tools, the inherent visuo-motor transformation needs to be mastered. The successful adjustment to and learning of these transformations crucially depends on practice conditions, particularly on the type of visual feedback during practice. Here, a review about empirical research exploring the influence of continuous and terminal visual feedback during practice on the mastery of visuo-motor transformations is provided. Two studies investigating the impact of the type of visual feedback on either direction-dependent visuo-motor gains or the complex visuo-motor transformation of a virtual two-sided lever are presented in more detail. The findings of these studies indicate that the continuous availability of visual feedback supports performance when closed-loop control is possible, but impairs performance when visual input is no longer available. Different approaches to explain these performance differences due to the type of visual feedback during practice are considered. For example, these differences could reflect a process of re-optimization of motor planning in a novel environment or represent effects of the specificity of practice. Furthermore, differences in the allocation of attention during movements with terminal and continuous visual feedback could account for the observed differences.


2003 ◽  
Vol 14 (5) ◽  
pp. 471-477
Author(s):  
Dejan M. Novakovic ◽  
Markku J. Juntti ◽  
Miroslav L. Dukic

2004 ◽  
Author(s):  
Michael D. Byrne ◽  
Alex Kirlik ◽  
Michael D. Fleetwood ◽  
David G. Huss ◽  
Alex Kosorukoff ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document