Gains from the clonal and the clonal seed-orchard options compared for tree breeding programs

1985 ◽  
Vol 71 (2) ◽  
pp. 242-249 ◽  
Author(s):  
A. C. Matheson ◽  
D. Lindgren
2016 ◽  
Vol 36 (86) ◽  
pp. 127
Author(s):  
Wanderley Dos Santos ◽  
Elton Gean Araújo ◽  
Danilla Cristina Lemos Souza ◽  
Janaína Rodrigues da Silva ◽  
Camila Regina Silva Baleroni Recco ◽  
...  

Este trabalho foi realizado com o objetivo de estimar a divergência genética entre progênies de Pinus caribaea var. hondurensis, por meio de caracteres quantitativos. O experimento foi instalado em delineamento látice 10 x 10, triplo, com 100 tratamentos (96 progênies oriundas de polinização aberta de um pomar clonal da espécie e quatro testemunhas). Foram avaliados os caracteres: diâmetro a 1,30 m do solo, altura total de planta, volume cilíndrico, produção de resina total e resina por área de painel. Utilizou-se a distância generalizada de Mahalanobis (D2) e o método de otimização de Tocher. A maior distância genética observada entre as progênies foi de 100% (D2 = 65,51) e a menor foi de 0,09% (D2 = 0,15). O caractere volume foi o que mais contribuiu para a divergência genética entre os grupos avaliados. O agrupamento a partir do método de otimização de Tocher possibilitou a separação das progênies em quatro grupos, com concentração de 96,9% das progênies em um único grupo. Para que estas progênies possam ser incluídas em programas de melhoramento genético para produção de resina e madeira, cruzamentos controlados deverão ser priorizados entre indivíduos mais produtivos, que apresentaram maior divergência genética.Genetic divergence genetic between Pinus caribaea var. hondurensis progenies based on quantitative traitsThe proposal of this study was to estimate the genetic divergence among Pinus caribaea var. hondurensis progenies through quantitative traits. Trail was established in lattice design 10 x 10, triple, with 100 treatments (96 progenies from clonal seed orchard of P. caribaea var. hondurensis and four controls). The genetic divergence was estimated using the generalized Mahalanobis distance (D2) and Torcher’s optimization method. Diameter at 1.30 above the ground, total plant height, cylindrical volume, total resin production and resin per panel area were evaluated. The largest genetic distance observed between the progenies was 100% (D2 = 65.51) and the lowest was 0,09% (D2 = 0.15). Clustering by Torcher’s optimization method separated the progeny in four groups, with a concentration of 96.9% of the progenies in a single group. Volume was the largest contributor to the genetic divergence among groups. To include these progeny in breeding programs for resin and wood production controlled crossings should be prioritized among the most productive individuals that presented greater genetic divergence.Index terms: Genetic breeding; Generalized Mahalanobis distance; Tocher optimization


2019 ◽  
Vol 61 (4) ◽  
pp. 284-298
Author(s):  
Yuriy Hayda ◽  
Svitlana Los ◽  
Roman Yatsyk ◽  
Larisa Tereshchenko ◽  
Grygoriy Shlonchak ◽  
...  

Abstract The seed orchards (SO) serve possibilities to collect seeds from the selected genotypes or to create artificial population throughout the controlled crossing of the target genotypes. Therefore, the seed material obtained from the clonal and seedling seed orchards offers unique opportunity to improve the genetic value of seeds. Thus, the seed orchards are considered as an important part of the forest seed base being the key object for both modern forestry and forestry research. This paper outlines the forest breeding activities associated with the seed production in the seed orchards in Ukraine over the last 70 years. During this period, the different aspects related to the establishment and management of the seed orchard were studied. In these processes, many failures had occurred, their causes and consequences were described. These main breeding activities were reported considering plain and mountain regions of Ukraine as well as specific aspects of the reproduction of the main forest tree species. As of 2019, the total area of the clonal seed orchards (CSO) reached 1040.3 ha, while seedling seed orchards (SSO) only 273.7 ha. The results of research on the growth, reproductive development, the morphology of the plus trees clones in the SO were generalized. The article on the current problems and challenges for Ukrainian forestry mainly related to forest tree breeding and there was also focus on forest seed industry. For the main forest trees species (Scots pine, English oak and other), targeted breeding programs should be developed. It is relevant to create the genetic bank of the forest seeds.


ISRN Forestry ◽  
2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Edward Missanjo ◽  
Gift Kamanga-Thole ◽  
Vidah Manda

Genetic and phenotypic parameters for height, diameter at breast height (dbh), and volume were estimated for Pinus kesiya Royle ex Gordon clonal seed orchard in Malawi using an ASReml program, fitting an individual tree model. The data were from 88 clones assessed at 18, 23, 30, 35, and 40 years of age. Heritability estimates for height, dbh, and volume were moderate to high ranging from 0.19 to 0.54, from 0.14 to 0.53, and from 0.20 to 0.59, respectively, suggesting a strong genetic control of the traits at the individual level, among families, and within families. The genetic and phenotypic correlations between the growth traits were significantly high and ranged from 0.69 to 0.97 and from 0.60 to 0.95, respectively. This suggests the possibility of indirect selection in trait with direct selection in another trait. The predicted genetic gains showed that the optimal rotational age of the Pinus kesiya clonal seed orchard is 30 years; therefore, it is recommended to establish a new Pinus kesiya clonal seed orchard. However, selective harvest of clones with high breeding values in the old seed orchard should be considered so that the best parents in the old orchard can continue to contribute until the new orchard is well established.


2006 ◽  
Vol 36 (4) ◽  
pp. 1054-1058 ◽  
Author(s):  
O K Hansen ◽  
E D Kjær

A paternity analysis using five microsatellite markers was conducted in a Danish clonal seed orchard with 13 Abies nordmanniana (Stev.) Spach clones. The purpose was to investigate potential seed-orchard dysfunctions, with special emphasis on nonequal pollen contributions and selfing. Male paternity was found for 232 seedlings germinated from seeds collected on three ramets, each of eight clones, and the relative contribution of each clone to the gene pool of male gametes was calculated. Furthermore, 49 ramets were genotyped to check for erroneous grafting. The effect of an unbalanced male contribution was quantified by means of two measures: (1) the status number (NS), which reflects buildup of coancestry in the seed-orchard crop as a result of a low number of clones and an unequal male contribution, and (2) the asymptotic variance effective population number (Ne(v)). The contributions by pollen donors from the 13 clones were highly skewed. Three clones were fathers to more than 75% of the progenies, while making up only 24% of the ramets in the seed orchard. Four clones sired no progenies at all. The unequal contribution on the male side corresponded to NS = 4.2 and Ne(v) = 5.8. Some selfing was observed, which may give rise to concern if clonal seed orchards with few clones are established. The estimated maximum pollen contamination from outside the seed orchard was 4.3%. No grafting–labelling errors were identified.


2016 ◽  
Vol 7 (3) ◽  
pp. S61-S63
Author(s):  
Zainal Muttaqin ◽  
Sri Wilarso Budi R ◽  
Basuki Wasis ◽  
Iskandar Z Siregar ◽  
Corryanti .

Mistletoe is hemiparasitic plants (macroparasite) on seasonal and annual plants include trees, however, mistletoes are also beneficial as key species that fill in the ecological niche, and a potential to non-wood forest product such as medicinal plants as one of them. The objectives of this research are to identify species of teak mistletoes at Padangan Clonal Seed Orchard (CSO) in Perum Perhutani and to aim its posibilities as medicinal plant. The inventory methods on species of teak mistletoes was carried out in compartements/blocks of teak clones that are designated as Observation Sample Plots (OSPs/PCP) of the attack intensity from low, medium, high, control; and four units Observation Measurement Plots (OMPs/PUP) on each OSPs/PCP. Continously, it was analized by comparing the same species of mistletoes on other host trees as reference which was efficacious to be used as medicinal plant. Three species of mistletoes parasitizing teak clone stands were identified as Dendrophthoe pentandra (L.) Miq. of family of Loranthaceae which is also attacking other host trees, Macrosolen tetragonus (Blume) Miq. of family of Loranthaceae too, Viscum articulatum Burm. F. of family of Santalacea/Viscaceae that is hyperparasite on two other mistletoes. The comparison with the same teak mistletoe but on different host trees shows that including D. pentandra and V. articulatum have the potential for hypertension treatment. D. pentandra is used too for medicine to cure ilness, wounds, fester and recovery from parturition. Known that chemical content this mistletoe comprise of flavonoid ingrident, fenolat acid (terulat acid, para hidroksi benzoate acid, kumarat acid, protokatekuat acid and vanilat acid. As for the utilization of M. tetragonus hasn’t been discovered up to this moment.Key words: mistletoe, identification, teak clone, non-wood forest product, medicinal plant


2017 ◽  
Vol 3 (1) ◽  
pp. 1-5
Author(s):  
Futoshi Ishiguri ◽  
Kazuko Makino ◽  
Imam Wahyudi ◽  
Jun Tanabe ◽  
Yuya Takashima ◽  
...  

The present study clarified the relationship between the growth and wood properties of 54-year-old Agathis sp. trees planted in Indonesia. Stem diameter, pilodyn penetration, and stress-wave velocity (SWV) were measured for all trees (35 trees) in a plot (30  30 m) located almost at the center of a stand. Based on the mean stem diameter, 10 standard trees in a plot were selected for measuring the basic density (BD) and compressive strength parallel to grain (CS). Core samples (5 mm in diameter) were collected from the 10 selected trees to determine BD and CS. The mean stem diameter, pilodyn penetration and SWV in the plot were 40.2  11.3 cm, 23.4  2.1 cm, and 3.85  0.43 km/s, respectively. No  significant correlation coefficeint (r = -0.327, no significance at 5% level) was obtained between stem diameter and SWV. The mean BD and CS in the 10 trees were 0.42  0.03 g/cm3  and 28.1  2.7 MPa, respectively. A significant positive  correlation was observed between BD and CS. Analysis of variance (ANOVA) revealed a significant difference between BD and CS values of the 10 trees, indicating that wood properties may differ among trees with the same standard growth in a stand. From these results, we concluded that wood quality improvement in this species could be achieved by selecting  trees with high density and strength in tree breeding programs.


Author(s):  
Melusi Rampart

Maternal effects were assessed by germinating seeds sourced over multiple years from the same cloned mother trees, comparing germination capacity and rate between crop years. The relationships between climatic variables, seed characteristics and germination capacity were determined, and thermal time parameters were used to predict seed dormancy release and germination under the climatic conditions in the year after seed collection. There were significant differences in seed weight (P < 0.05), seed length and embryo occupancy (both P < 0.001) among crop years. Temperature during the seed development period explained 70% of the variation in seed weight and 63% of the variation in embryo occupancy. Germination capacity was significantly (P <0.001) different among crop years, among temperatures and among chilling durations, and thermal time requirements for germination increased from older (2007) to younger (2012) seeds. The mean base temperature without chilling was 7.1°C, while after chilling it was 4.6°C and 3.6°C for four and eight weeks chilling respectively. The mean thermal time to 50% germination without chilling was 135.1°Cd, while after chilling it was 118.3°Cd and 154.0°Cd for four and eight weeks chilling respectively. This experiment demonstrates that year-to-year differences in the environment experienced by mother trees during seed maturation can affect seed germination characteristics.


2008 ◽  
Vol 65 (7) ◽  
pp. 706-706 ◽  
Author(s):  
Lúcia Fernandes ◽  
Margarida Rocheta ◽  
Jorge Cordeiro ◽  
Sandra Pereira ◽  
Sophie Gerber ◽  
...  

2000 ◽  
Vol 100 (2) ◽  
pp. 199-206 ◽  
Author(s):  
D. P. Gwaze ◽  
F. E. Bridgwater ◽  
T. D. Byram ◽  
J. A. Woolliams ◽  
C. G. Williams

1969 ◽  
Vol 45 (6) ◽  
pp. 386-392 ◽  
Author(s):  
L. Parrot

Although most of our tree-breeding programs are concerned with coniferous forest species, we must not neglect the valuable hardwoods exploited in our region. The need of these programs for hardwoods is undeniable and they should be based, as much as possible, on genecological studies.One such study illustrates the wide variation in genetic adaptation of Juglans nigra and indicates its practical implications. Further, these results were obtained from a short-term study of 17 provenances for variations in frost-hardiness at a single location.Intra-specific variation is being investigated in Juglans cinerea, a more common species in our region than the one previously mentioned and one which is also in strong demand for furniture-making and wood sculpture. The resulting data will permit the selection of the best seed zones. Such a breeding program could eventually support far more than small, local industries.Another project involving Acer saccharum describes the variation in sugar-content of sap in three maple stands sampled each spring from 1965 to 1969. Two stands were very homogeneous compared to the third. The magnitude of the differences maintained throughout the study period led to the selection of nine genotypes whose sugar contents varied from 4.6% to 9.7%, indicating maximum genetic gains on the order of 150%.Continued research in vegetative propagation of Acer saccharum is needed for the production of clonal populations for breeding programs.


Sign in / Sign up

Export Citation Format

Share Document