Photocolorimetric determination of pyridoxin hydrochloride in pharmaceutical preparations

1968 ◽  
Vol 2 (4) ◽  
pp. 218-221
Author(s):  
A. M. Aliev ◽  
A. O. Onov
Keyword(s):  
Pharmaceutical Preparations ◽  
Photocolorimetric Determination

Simultaneous Spectrophotometric Determination of Salbutamol by Coupling with Diazotized 4-Aminobenzoic acid

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Hind Hadi ◽  
Gufran Salim
Keyword(s):  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Dosage Forms ◽  
Water Soluble ◽  
Trace Determination ◽  
Aminobenzoic Acid ◽  
Optimum Conditions ◽  
Colored Product ◽  
Versus Concentration

A simple, rapid and sensitive spectrophotmetric method for trace determination of salbutamol (SAL) in aqueous solution and in pharmaceutical preparations is described. The method is based on the diazotization coupling reaction of the intended compound with 4-amino benzoic acid (ABA) in alkaline medium to form an intense orange, water soluble dye that is stable and shows maximum absorption at 410 nm. A graph of absorbance versus concentration indicates that Beer’s law is obeyed over the concentration range of 0.5-30 ppm, with a molar absorbtivity 3.76×104 L.mol-1 .cm-1 depending on the concentration of SAL. The optimum conditions and stability of the colored product have been investigated and the method was applied successfully to the determination of SAL in dosage forms.

Colorimetric Determination of Amoxicillin in Pure and some Pharmaceutical Formulations Via Reaction with Potassium Permanganate as Oxidant Reagent

2019 ◽  
Vol 10 (02) ◽  
Author(s):  
Abbas Shebeeb Al-kadumi ◽  
Sahar Rihan Fadhel ◽  
Mohammed Abdullah Ahmed ◽  
Luma Amer Musa
Keyword(s):  
Potassium Permanganate ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Atomic Emission ◽  
Basic Medium ◽  
Photometric Method ◽  
Colorimetric Determination ◽  
Spectrophotometric Methods ◽  
Label Claim

We proposed two simple, rapid, and convenient spectrophotometric methods are described for the determination of Amoxicillin in bulk and its pharmaceutical preparations. They are based on the measurement of the flame atomic emission of potassium ion (in first method) and colorimetric determination of the green colored solution for manganite ion at 610 nm formed after reaction of Amoxicillin with potassium permanganate as oxidant agent (in the second method) in basic medium. The working conditions of the methods were investigated and optimized. Beer's law plot showed a good correlation in the concentration range of 5-45 μg/ml. The detection limits and relative standared deviations were (2.573, 2.814 μg/ml) (2.137, 2.498) for the flame emission photometric method and (1.844, 2.016 μg/ml) (1.645,1.932) for colorimetric methods for capsules and suspensions respectively. The methods were successfully applied to the determination of Amoxicillin in capsules and suspensions, and the obtained results were in good agreement with the label claim. No interference was observed from the commonly encountered additives and expectancies.

Simultaneous Determination of Methocarbamol and Paracetamol in the Presence of Three Related Substances by Ultra Performance Liquid Chromatography

2019 ◽  
Vol 15 (5) ◽  
pp. 505-510
Author(s):  
Yanjuan Zheng ◽  
Qiushi Peng ◽  
Rui Dong ◽  
Tingyu Chen ◽  
Yi Bao ◽  
...  
Keyword(s):  
Liquid Chromatography ◽  
Pharmaceutical Preparations ◽  
Gradient Elution ◽  
Ultra Performance Liquid Chromatography ◽  
Related Substances ◽  
Bulk Powder ◽  
Highly Sensitive ◽  
Optimal Protocol ◽  
Acquity Uplc

Introduction: A rapid, and accurate Ultra Performance Liquid Chromatography (UPLC) method was developed to simultaneously analyze Methocarbamol, Paracetamol and the related substances Materials and Methods: Waters ACQUITY UPLC® BEH Phenyl C18 column was used in conjunction with UV detection at 225nm. Gradient elution with 0.05M, pH 6 phosphate buffer and acetonitrile flow at 0.3mL /min rate were used to separate the substances. The retention times for 4-Aminopheno, Paracetamol, Guaifenesin, Methocarbamol, and 4-Chloroacetanilide were 1.319 minute, 2.224 minute, 4.467 minute, 4.769 minute and 5.433 minute respectively. The concentration was linear in the range of 2-100 µg/ml for Methocarbamol, and 1-100 µg/mL for Paracetamol. The percentage recoveries were between 99.28±1.23% to 100.57±0.99% for Methocarbamol, and between 99.08±1.23% to 101.23±1.39% for Paracetamol. Results and Discussion: The validated optimal protocol is robust and accurate for simultaneous analysis of Methocarbamol, Paracetamol and the related substances, applicable for bulk powder as well as pharmaceutical formulation. Conclusion: In this paper, a highly sensitive, accurate, and precise UPLC method with UV-Vis detection was developed and validated for quality control of MET and PAR in bulk as well as in pharmaceutical preparations.

Development and Validation of an Eco-Friendly and Low-Cost Method for the Quantification of Cefepime Hydrochloride in Powder for Injectable Solution Using Infrared (IR) Spectroscopy

2020 ◽  
Vol 16 (4) ◽  
pp. 456-464
Author(s):  
Danilo F. Rodrigues ◽  
Hérida R.N. Salgado
Keyword(s):  
Ir Spectroscopy ◽  
Low Cost ◽  
Pharmaceutical Preparations ◽  
Potassium Bromide ◽  
Pharmaceutical Products ◽  
Injectable Formulation ◽  
Ich Guidelines ◽  
Lactam Ring ◽  
Development And Validation

Background: A simple, eco-friendly and low-cost Infrared (IR) method was developed and validated for the analysis of Cefepime Hydrochloride (CEF) in injectable formulation. Different from some other methods, which employ organic solvents in the analyses, this technique does not use these types of solvents, removing large impacts on the environment and risks to operators. Objective: This study aimed at developing and validating a green analytical method using IR spectroscopy for the determination of CEF in pharmaceutical preparations. Methods: The method was validated according to ICH guidelines and the quantification of CEF was performed in the spectral region absorbed at 1815-1745 cm-1 (stretching of the carbonyl group of β- lactam ring). Results: The validated method showed to be linear (r = 0.9999) in the range of 0.2 to 0.6 mg/pellet of potassium bromide, as well as for the parameters of selectivity, precision, accuracy, robustness and Limits of Detection (LOD) and Quantification (LOQ), being able to quantify the CEF in pharmaceutical preparations. The CEF content obtained by the IR method was 103.86%. Conclusion: Thus, the method developed may be an alternative in the quality control of CEF sample in lyophilized powder for injectable solution, as it presented important characteristics in the determination of the pharmaceutical products, with low analysis time and a decrease in the generation of toxic wastes to the environment.

Analytical Methods for the Determination of Sartans in Pharmaceutical Formulations and Biological Fluids: A Review

2020 ◽  
Vol 16 (3) ◽  
pp. 208-222
Author(s):  
Miglena Smerikarova ◽  
Stanislav Bozhanov ◽  
Vania Maslarska
Keyword(s):  
Biological Fluids ◽  
Pharmaceutical Preparations ◽  
Improve Patient Care ◽  
Pharmaceutical Formulations ◽  
Treatment Of Hypertension ◽  
Therapeutic Doses ◽  
Reliable Methods ◽  
Improve Patient

Background: Sartans are mostly used as a part of combination with additional medicines in the therapy of essencial hypertension. Preferred combinations are ARB and thiazide diuretics (Hydrochlorothiazide (HCT) and Chlorthalidone (CHL)) or ARB and calcium antagonists. The number of sartans mostly prescribed by specialists is only seven - Candesartan (CDS), Eprosartan (EPS), Irbesartan (IBS), Losartan (LOS), Olmesartan (OMS), Telmisartan (TMS) and Valsartan (VLS). Methods: The widespread use of sartans in the treatment of hypertension requires reliable methods of analysis. Bulk drugs and pharmaceutical preparations should be analyzed to ensure the quality of the medicinal products reaching patients. On the other hand, the analysis of drugs in biological fluids aims to trace and improve patient care by adjusting the therapeutic doses of drugs. According to our knowledge, a review devoted to the analysis of sartans was published in 2014. Results: Spectral methods are widely used in the analysis of bulk drugs and pharmaceutical dosage forms due to their relatively simple procedures, low reagent and sample consumption, speed, precision and accuracy combined with accessibility and comparatively low cost of common apparatus. Many papers for determination of sartans in bulk drugs and pharmaceutical preparations based on liquid chromatographic techniques were published in the available literature. Among these methods, HPLC takes the leading place but UPLC and HPTLC are also present. Conclusion: The widespread use of sartans in the treatment of hypertension requires reliable methods of analysis. Bulk drugs and pharmaceutical preparations should be analyzed to ensure the quality of the medicinal products reaching patients. On the other hand, the analysis of drugs in biological fluids aims to trace and improve patient care by adjusting the therapeutic doses of drugs. Since 2014, many articles have been published on the sartans analysis and this provoked our interest to summarize the latest applications in the analysis of sartans in pharmaceutical formulations and biological media. Articles published from 2014 to 2018 are covered.

Optimum HPLC Conditions for Determination of Dibucaine HCL, Fluocortolone Pivalate and Fluocortolone Caproate by Using Experimental Design

2018 ◽  
Vol 15 (1) ◽  
pp. 32-38 ◽  
Author(s):  
Bürge Aşçı ◽  
Mesut Koç
Keyword(s):  
Experimental Design ◽  
Flow Rate ◽  
Mobile Phase ◽  
High Performance ◽  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Acid Mixture ◽  
Solution Stability ◽  
Uv Detector

Introduction:This paper presents the development and validation of a novel, fast, sensitive and accurate high performance liquid chromatography (HPLC) method for the simultaneous quantitative determination of dibucaine HCl, fluocortolone pivalate and fluocortolone caproate in pharmaceutical preparations.Experiment:Development of the chromatographic method was based on an experimental design approach. A five-level-three-factor central composite design requiring 20 experiments in this optimization study was performed in order to evaluate the effects of three independent variances including mobile phase ratio, flow rate and amount of acid in the mobile phase.Conclusion:The optimum composition for mobile phase was found as a methanol:water:acetic acid mixture at 71.6 : 26.4 : 2 (v/v/v) ratio and optimum separation was acquired by isocratic elution with a flow rate of 1.3 mL/min. The analytes were detected using a UV detector at 240 nm. The developed method was validated in terms of linearity, precision, accuracy, limit of detection/quantitation and solution stability and successfully applied to the determination of dibucaine HCl, fluocortolone pivalate and fluocortolone caproate in pharmaceutical topical formulations such as suppositories and ointments.

BATCH AND FLOW INJECTION SPECTROPHOTOMETRIC METHODS FOR DETERMINATION OF PARACETAMOL IN PHARMACEUTICAL PREPARATIONS VIA OXIDATIVE COUPLING WITH 4-AMINOANTIPYRINE

2010 ◽  
Vol 13 (1) ◽  
pp. 11-19
Author(s):  
Mouayed Q. Al-Abachi ◽  
◽  
Raghad Sinan ◽  
Zaineb Falah ◽  
◽  
...  
Keyword(s):  
Flow Injection ◽  
Oxidative Coupling ◽  
Pharmaceutical Preparations ◽  
Spectrophotometric Methods

scholarly journals Application of Derivative, Derivative Ratio, and Multivariate Spectral Analysis and Thin-Layer Chomatography-Densitometry for Determination of a Ternary Mixture Containing Drotaverine Hydrochloride, Caffeine, and Paracetamol

2007 ◽  
Vol 90 (2) ◽  
pp. 391-404 ◽  
Author(s):  
Fadia H Metwally ◽  
Yasser S El-Saharty ◽  
Mohamed Refaat ◽  
Sonia Z El-Khateeb
Keyword(s):  
Thin Layer ◽  
Least Squares ◽  
Ternary Mixture ◽  
Principal Component Regression ◽  
Pharmaceutical Preparations ◽  
Principal Component ◽  
Standard Addition ◽  
Drotaverine Hydrochloride ◽  
Assay Precision

Abstract New selective, precise, and accurate methods are described for the determination of a ternary mixture containing drotaverine hydrochloride (I), caffeine (II), and paracetamol (III). The first method uses the first (D1) and third (D3) derivative spectrophotometry at 331 and 315 nm for the determination of (I) and (III), respectively, without interference from (II). The second method depends on the simultaneous use of the first derivative of the ratio spectra (DD1) with measurement at 312.4 nm for determination of (I) using the spectrum of 40 μg/mL (III) as a divisor or measurement at 286.4 and 304 nm after using the spectrum of 4 μg/mL (I) as a divisor for the determination of (II) and (III), respectively. In the third method, the predictive abilities of the classical least-squares, principal component regression, and partial least-squares were examined for the simultaneous determination of the ternary mixture. The last method depends on thin-layer chromatography-densitometry after separation of the mixture on silica gel plates using ethyl acetatechloroformmethanol (16 + 3 + 1, v/v/v) as the mobile phase. The spots were scanned at 281, 272, and 248 nm for the determination of (I), (II), and (III), respectively. Regression analysis showed good correlation in the selected ranges with excellent percentage recoveries. The chemical variables affecting the analytical performance of the methodology were studied and optimized. The methods showed no significant interferences from excipients. Intraday and interday assay precision and accuracy values were within regulatory limits. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of their pharmaceutical preparations. The validity of the proposed methods was further assessed by applying a standard addition technique. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.

Sign in / Sign up

Export Citation Format

Share Document