Simultaneous Spectrophotometric Determination of Salbutamol by Coupling with Diazotized 4-Aminobenzoic acid

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Hind Hadi ◽  
Gufran Salim
Keyword(s):  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Dosage Forms ◽  
Water Soluble ◽  
Trace Determination ◽  
Aminobenzoic Acid ◽  
Optimum Conditions ◽  
Colored Product ◽  
Versus Concentration

A simple, rapid and sensitive spectrophotmetric method for trace determination of salbutamol (SAL) in aqueous solution and in pharmaceutical preparations is described. The method is based on the diazotization coupling reaction of the intended compound with 4-amino benzoic acid (ABA) in alkaline medium to form an intense orange, water soluble dye that is stable and shows maximum absorption at 410 nm. A graph of absorbance versus concentration indicates that Beer’s law is obeyed over the concentration range of 0.5-30 ppm, with a molar absorbtivity 3.76×104 L.mol-1 .cm-1 depending on the concentration of SAL. The optimum conditions and stability of the colored product have been investigated and the method was applied successfully to the determination of SAL in dosage forms.

scholarly journals Batch and Flow-Injection Spectrophotometric Determination of Thymol Using Procaine Hydrochloride as a New Chromogenic Reagent

2012 ◽  
Vol 9 (2) ◽  
pp. 302-310 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Coupling Reaction ◽  
Water Soluble ◽  
Procaine Hydrochloride ◽  
Spectrophotometric Methods ◽  
Sample Throughput ◽  
Experimental Parameters ◽  
Colored Product ◽  
Mouth Wash ◽  
Versus Concentration

New, simple and sensitive batch and Flow-injecton spectrophotometric methods for the determination of Thymol in pure form and in mouth wash preparations have been proposed in this study. These methods were based on a diazotization and coupling reaction between Thymol and diazotized procaine HCl in alkaline medium to form an intense orange-red water-soluble dye that is stable and has a maximum absorption at 474 nm. A graphs of absorbance versus concentration show that Beer’s law is obeyed over the concentration range of 0.4-4.8 and 4-80 µg.ml-1 of Thymol, with detection limits of 0.072 and 1.807 µg.ml-1 of Thymol for batch and FIA methods respectively. The FIA procedure sample throughput was 80 h-1. All different chemical and physical experimental parameters that affecting on the development and stability of the colored product were carefully studied and the proposed methods were successfully applied to the determination of Thymol in mouth wash preparations.

scholarly journals Batch and Flow-Injection Spectrophotometric Determination of Procaine HCl in Pharmaceutical Preparations Via Using Diazotization and Coupling Reaction

2012 ◽  
Vol 9 (3) ◽  
pp. 521-531
Author(s):  
Baghdad Science Journal
Keyword(s):  
Flow Injection ◽  
Diazonium Salt ◽  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Standard Addition ◽  
Water Soluble ◽  
Spectrophotometric Methods ◽  
Colored Product ◽  
Average Sample

Simple and sensitive batch and Flow-injection spectrophotometric methods for the determination of Procaine HCl in pure form and in injections were proposed. These methods were based on a diazotization reaction of procaine HCl with sodium nitrite and hydrochloric acid to form diazonium salt, which is coupled with chromatropic acid in alkaline medium to form an intense pink water-soluble dye that is stable and has a maximum absorption at 508 nm. A graphs of absorbance versus concentration show that Beer’s law is obeyed over the concentration range of 1-40 and 5-400 µg.ml-1 of Procaine HCl, with detection limits of 0.874 and 3.75 µg.ml-1 of Procaine HCl for batch and FIA methods respectively. The FIA average sample throughput was 70 h-1. All different chemical and physical experimental parameters that affecting on the development and stability of the colored product were carefully studied and the proposed methods were applied satisfactorily for the determination of Procaine HCl in an injections samples using the standard addition method.

Spectrophotometric Determination of p-aminobenzoic acid via Diazotization and Coupling reaction

2021 ◽  
pp. 5313-5318
Author(s):  
Rana S. Al-Saffar ◽  
Safaa A. Zakaria ◽  
Nabeel S. Othman
Keyword(s):  
Folic Acid ◽  
Hydrochloric Acid ◽  
Sodium Nitrite ◽  
Azo Dye ◽  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Water Soluble ◽  
Good Sensitivity ◽  
Aminobenzoic Acid

A simple and accurate spectrophotometric method to assay p-aminobenzoic acid (PABA) has been suggested. The method based on the diazotization of PABA via reaction with nitrite ions which liberated in the medium through the reaction of sodium nitrite with hydrochloric acid, then coupling the dizotised-PABA(D-PABA)with 1-naphthylamine -7-sulphonic acid (1-NASA) to form an intense colored pink azo dye ,it is water-soluble , very stable and has a maximum absorbance at 525 nm. The absorbance was increase with the increasing of PABA amounts in the solution, and the linearity from 2.5 to70 µg in 10 ml (0.25to7 µg.ml-1).The molar absorptivity and Sandell ҆s sensitivity values have been calculated they equal to 3.6057x104 L.mol-1 cm -1 and 0.0037993 µg. cm-2 respectively. The two values above demonstrated a good sensitivity of the suggested method. The method has been used in estimated PABA resulted from analysis of folic acid in tablet.

scholarly journals DETERMINATION OF PHENYLEPHRINE HYDROCHLORIDE IN PHARMACEUTICAL PREPARATIONS USING SPECTROPHOTOMETRIC METHOD

2019 ◽  
pp. 339-343 ◽  
Author(s):  
WASAN A AL-UZRI
Keyword(s):  
Spectrophotometric Method ◽  
Diazonium Salt ◽  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Calibration Plot ◽  
Good Precision ◽  
Phenylephrine Hydrochloride ◽  
Colored Product ◽  
Sulfacetamide Sodium

Objective: A simple and sensitive spectrophotometric method has been presented for the determination of phenylephrine hydrochloride by coupling reaction with diazotized sulfacetamide sodium. Methods: The method is based on the diazotization reaction of sulfacetamide sodium with sodium nitrite in the presence of hydrochloric acid to form diazonium salt, which is coupled with the drug in alkaline medium to form azo dye, showing absorption maxima at 425 nm. Results: Calibration plot was linear over the concentration range of 2–24 μg/mL and detection limit of 0.278 μg/mL with a correlation coefficient of 0.9929. All different chemical and physical experimental parameters affecting on the development and stability of the colored product were carefully studied. Conclusions: The proposed method was successfully applied to the determination of phenylephrine in nasal drops with good precision and sensitivity.

scholarly journals Spectrophotometric determination of Procaine penicillin in pure and pharmaceutical formulations using metol

2008 ◽  
Vol 5 (1) ◽  
pp. 137-142
Author(s):  
Baghdad Science Journal
Keyword(s):  
Transfer Reaction ◽  
Pharmaceutical Formulations ◽  
Water Soluble ◽  
Charge Transfer Reaction ◽  
Optimum Conditions ◽  
Procaine Penicillin ◽  
Colour Development ◽  
Water Soluble Complex ◽  
Versus Concentration

A simple, accurate and sensitive spectrophotometric method for the determination of Procaine penicillin (PP) is described. The method is based on charge-transfer reaction of PP with metol (N-methyl-p-hydroxy aniline) in the presence of ferric sulphate to form a purple-water soluble complex ,which is stable and has a maximum absorption at 510 nm .A graph of absorbance versus concentration shows that Beer’s low is obeyed over the concentration range of 3-80 µg /ml of PP (i.e.,3-80 ppm) with a molar absorbativity of 4.945 ×103 L.mol-1.cm-1 ,Sandell sensitivity of 0.1190 µg cm-2 ,a relative error of (-1.57)-2.79 % and a standard deviation of less than 0.59 depending on the concentration of PP.The optimum conditions for full colour development are described and the proposed method was probably applied satisfactorily to pharmaceutical injections containing PP.

scholarly journals Determination of Doxycycline Hyclate by Batch and Reverse Flow Injection Analysis Based on the Oxidative Coupling Reaction with 3-Methyl-2-benzothiazolinone Hydrazone hydrochloride (MBTH)

2016 ◽  
Vol 13 (2) ◽  
pp. 489-495
Author(s):  
Baghdad Science Journal
Keyword(s):  
Oxidative Coupling ◽  
Reverse Flow ◽  
Pharmaceutical Preparations ◽  
Coupling Reaction ◽  
Calibration Graph ◽  
Water Soluble ◽  
Green Water ◽  
Doxycycline Hyclate ◽  
Oxidative Coupling Reaction

New, simple and sensitive batch and reverse FIA spectrophotometric methods for the determination of doxycycline hyclate in pure form and in pharmaceutical preparations were proposed. These methods based on oxidative coupling reaction between doxycycline hyclate and 3-methylbenzothiazolinone-2-hydrazone hydrochloride (MBTH) in the presence ammonium ceric sulfate in acidic medium, to form green water-soluble dye that is stable and has a maximum absorbance at 626 nm. A calibration graph shows that a Beer's law is obeyed over the concentration range of 1-80 and 0.5-110 ?g.mL-1 of DCH for the batch and rFIA respectively with detection limit of 0.325 ?g.mL-1 of DCH for r-FIA methods. All different chemicals and physical experimental parameters affecting the development and stability of the colored product were carefully studied. The proposed methods were successfully applied for the determination of DCH in pharmaceutical preparations.

Spectrophotometeric Determination of Trifluoperazine HCL in Pure Forms and Pharmaceutical Preperations

2017 ◽  
Vol 9 (5) ◽  
Author(s):  
Mohammad Hamzah Hamzah ◽  
Rawa M M Taqi ◽  
Muna M. Hasan ◽  
Raid J. M. Al-Timimi
Keyword(s):  
Standard Method ◽  
Limit Of Detection ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Oxidizing Agent ◽  
Optimum Conditions ◽  
Limit Of Quantification ◽  
Cerium Ion ◽  
Blank Solution

A simple and accurate spectrophotometric method for the determination of Trifluoperazine HCl in pure and dosage forms was developed. The method is based on the reaction between Trifluoperazine HCl and p-chloroaniline in the presence of cerium ion as oxidizing agent which lead to the formation of violate color product that absorbed at a maximum wavelength 570nm while the blank solution was pink. Under the optimum conditions a linear relationship between the intensity and concentration of TRF in the range 4-50μg/ml was obtained . The molar absorptivity 3.74×103 L.mol-1.cm-1 , Limit of detection (2.21μg/ml), while limit of quantification was 7.39μg/ml. The proposed analytical method was compared with standard method using t-test and F-test , the obtained results shows there is no significant differences between proposed method and standard method. Based on that the proposed method can be used as an alternative method for the determination of TRF in pure and dosage forms.

scholarly journals SYNTHESIS OF NEW SUBSTITUTED PROCAINE HYDROCHLORIDE COMPOUNDS AND THEIR USE IN SPECTROPHOTOMETRIC DETERMINATION OF TETRACYCLINE HYDROCHLORIDE THROUGH DIAZOTIZATION-COUPLING REACTIONS

2021 ◽  
Vol 18 (39) ◽  
pp. 14-32
Author(s):  
Hind Sadiq Al-WARD ◽  
Mouayed Qassssim AL-ABACHI ◽  
Mohammed Rifaat AHMED
Keyword(s):  
Stability Constant ◽  
Thermodynamic Parameters ◽  
Coupling Reaction ◽  
Water Soluble ◽  
Procaine Hydrochloride ◽  
Effect Of Temperature ◽  
Basic Medium ◽  
Fast Method ◽  
The Stability

Background: Tetracycline is one of the most important antibiotics. It is used to treat many different bacterial infections. It is often used in treating severe acne, or sexually transmitted diseases such as syphilis, gonorrhea, or chlamydia. In some cases, tetracycline is used when penicillin or another antibiotic cannot be used to treat serious infections such as the ones caused by Bacillus anthracis, Listeria, Clostridium, Actinomyces. Aim: synthesized a new novel reagent used to determine TCH spectrophotometrically by using diazonium and coupling reaction. Methods: Four new substituted procaine derivatives were prepared by simple organic methods using aniline derivatives. A spectrophotometric approach was established for the micro-determination of TCH. The stoichiometry was investigated using mole ratio and continuous variation methods, and the stability constant was also estimated. The ΔG, ΔH, and ΔS were determined as thermodynamic parameters for evaluating the effect of temperature on the reaction. Results: Substituted procaine derivatives were prepared, and o-hydroxy procaine seems to be the best reagent used to determine TCH by diazotization and coupling reaction. The result was a yellow water-soluble dye with a maximum absorbance of 380 nm. The reaction conditions were studied and optimized. Beers law was obeyed over a concentration range (2.5–50) μg.mL-1 for TCH. The molar absorptivity was (14.4669.103) L.mol-1.cm-1, and the detection limit was (0.5052) μg.mL-1. The stoichiometry of the formed product was found 1:1 (o-hydroxyprocaine: TCH). The stability constant indicated that the product formed was stable, and the thermodynamic parameters showed that the diazonium salt reaction was preferred to occur at a low temperature. Conclusions: a simple, accurate, and fast method was developed to determine TCH in pure form and pharmaceuticals by coupling the TCH with a newly synthesized procaine derivative reagent (o-hydroxy procaine) in a basic medium.

scholarly journals Safety method, Spectrophotometric Determination of Sulfamethaxazole drug in bulk and Pharmaceutical Preparations

2010 ◽  
Vol 7 (1) ◽  
pp. 607-613 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Acidic Medium ◽  
Pharmaceutical Preparations ◽  
Color Stability ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Reaction Conditions ◽  
Pharmaceutical Dosage Forms ◽  
Stability Period ◽  
Orange Color

A simple, cheap, fast, accurate, Safety and sensitive spectrophotometric method for the determination of sulfamethaxazole (SFMx), in pure form and pharmaceutical dosage forms. has been described The Method is based on the diazotization of the drug by sodium nitrite in acidic medium at 5Cº followed by coupling with salbutamol sulphate (SBS) drug to form orange color the product was stabilized and measured at 452 nm Beer’s law is obeyed in the concentration range of 2.5-87.5 ?g ml-1 with molar absorptivity of 2.5x104 L mole-1 cm-1. All variables including the reagent concentration, reaction time, color stability period, and sulfamethaxazole /salbutamol ratio were studied in order to optimize the reaction conditions. No interferences were observed Results of analysis were validated statistically and by recovery studies. These methods are successfully employed for the determination of sulfamethaxazole in some pharmaceutical preparations.. The developed method is easy to use and accurate for routine studies relative to HPLC and other techniques.

Sign in / Sign up

Export Citation Format

Share Document