Selection of standard facilities for periodic inspection using probabilistic criteria

1977 ◽  
Vol 20 (7) ◽  
pp. 954-959
Author(s):  
N. N. Vostroknutov ◽  
M. A. Zemel'man ◽  
V. M. Kashlakov
Author(s):  
Marc Vantorre ◽  
Erik Laforce ◽  
Katrien Eloot ◽  
Jan Richter ◽  
Jeroen Verwilligen ◽  
...  

A calculation tool has been developed for determining tidal windows for deep-drafted ships approaching and leaving the Belgian harbors according to probabilistic criteria. The calculations are based on a database containing response functions for the vertical motions in waves and squat data for a selection of representative ships. The database contains both results of model tests carried out in the Towing tank for maneuvers in shallow water – co-operation Flanders Hydraulics Research & Ghent University in Antwerp (Belgium), as well as calculated values. During the experiments, draft, trim, under keel clearance (7 to 20% of draft) and speed have been varied. The tests were performed in regular waves with lengths which are small compared to ship length, and in wave spectra that are typical for the Belgian coastal area. For given input data (ship characteristics, speed, tide, directional wave spectra, bottom, trajectory, current, departure time), the tool calculates the probability of bottom touch during the transit, so that a tidal window can be determined. Other restrictions, such as penetration into fluid mud layers and current, are taken into account as well.


Author(s):  
Sheikha Mohammed Ali Al-Balushi ◽  
M Firdouse Rahman Khan

Purpose: The objectives of the study are to analyze the factors which influence patients to go to private hospitals against public hospitals of Oman and to analyze the expectations of patients from the integrated public hospitals in Oman.Design/methodology/approach: The study was carried out with a well-defined questionnaire through which 251 survey samples were collected on a random sampling basis.Findings: The results of the study reveal that there is an association between the selection of hospital and services and the cost of the services offered in the hospital and it is found that the cost of services incurred makes an impact in the selection of hospital for medical treatment. The study also revealed that in private hospitals patients could easily approach anyone including the reception staff and all are helpful, and the private hospitals are equipped with modern equipment, and doctors treat patients in a friendly manner.Research limitations/Implications: The majority of the population taken for the study are aged above 20 years, and the samples were collected from selected regions of Oman, and wide range collection of samples from all the regions will help to improve the solution.Social implications: The study suggests that sufficient medicines should be provided in all the public health centers and periodic inspection should be conducted at regular intervals to improve the standards of the public health Centers and Government Hospitals concerning cleanliness, treatments and the front line services.Originality/Value: No study has examined the causes for the hospital selection delay in the construction projects of Oman, and it is a first-hand study of its kind and the results will be useful to the stakeholders.


1971 ◽  
Vol 93 (4) ◽  
pp. 943-952 ◽  
Author(s):  
J. D. Stachiw ◽  
K. O. Gray

Lack of ASME Pressure Vessel Code Standards for the selection of material, designs, fabrication techniques, and prooftesting methods for viewports in hyperbaric chambers makes it mandatory that engineering judgment be exercised to the fullest in the procurement of such viewports. Based on the experience gained by the authors in past experimental programs dealing with design criteria, and procurement of acrylic viewports for major Navy hyperbaric chamber installations, practical guidelines are proposed for specifying such viewports. The guidelines contained in this paper address themselves to selection of viewport shape, safety factor, material, fabrication, quality control, proof-testing, and periodic inspection.


2019 ◽  
Vol 42 ◽  
Author(s):  
Gian Domenico Iannetti ◽  
Giorgio Vallortigara

Abstract Some of the foundations of Heyes’ radical reasoning seem to be based on a fractional selection of available evidence. Using an ethological perspective, we argue against Heyes’ rapid dismissal of innate cognitive instincts. Heyes’ use of fMRI studies of literacy to claim that culture assembles pieces of mental technology seems an example of incorrect reverse inferences and overlap theories pervasive in cognitive neuroscience.


1975 ◽  
Vol 26 ◽  
pp. 395-407
Author(s):  
S. Henriksen

The first question to be answered, in seeking coordinate systems for geodynamics, is: what is geodynamics? The answer is, of course, that geodynamics is that part of geophysics which is concerned with movements of the Earth, as opposed to geostatics which is the physics of the stationary Earth. But as far as we know, there is no stationary Earth – epur sic monere. So geodynamics is actually coextensive with geophysics, and coordinate systems suitable for the one should be suitable for the other. At the present time, there are not many coordinate systems, if any, that can be identified with a static Earth. Certainly the only coordinate of aeronomic (atmospheric) interest is the height, and this is usually either as geodynamic height or as pressure. In oceanology, the most important coordinate is depth, and this, like heights in the atmosphere, is expressed as metric depth from mean sea level, as geodynamic depth, or as pressure. Only for the earth do we find “static” systems in use, ana even here there is real question as to whether the systems are dynamic or static. So it would seem that our answer to the question, of what kind, of coordinate systems are we seeking, must be that we are looking for the same systems as are used in geophysics, and these systems are dynamic in nature already – that is, their definition involvestime.


1978 ◽  
Vol 48 ◽  
pp. 515-521
Author(s):  
W. Nicholson

SummaryA routine has been developed for the processing of the 5820 plates of the survey. The plates are measured on the automatic measuring machine, GALAXY, and the measures are subsequently processed by computer, to edit and then refer them to the SAO catalogue. A start has been made on measuring the plates, but the final selection of stars to be made is still a matter for discussion.


Author(s):  
P.J. Killingworth ◽  
M. Warren

Ultimate resolution in the scanning electron microscope is determined not only by the diameter of the incident electron beam, but by interaction of that beam with the specimen material. Generally, while minimum beam diameter diminishes with increasing voltage, due to the reduced effect of aberration component and magnetic interference, the excited volume within the sample increases with electron energy. Thus, for any given material and imaging signal, there is an optimum volt age to achieve best resolution.In the case of organic materials, which are in general of low density and electric ally non-conducting; and may in addition be susceptible to radiation and heat damage, the selection of correct operating parameters is extremely critical and is achiev ed by interative adjustment.


Author(s):  
P. M. Lowrie ◽  
W. S. Tyler

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).


Author(s):  
K.-H. Herrmann ◽  
D. Krahl ◽  
H.-P Rust

The high detection quantum efficiency (DQE) is the main requirement for an imagerecording system used in electron microscopy of radiation-sensitive specimens. An electronic TV system of the type shown in Fig. 1 fulfills these conditions and can be used for either analog or digital image storage and processing [1], Several sources of noise may reduce the DQE, and therefore a careful selection of various elements is imperative.The noise of target and of video amplifier can be neglected when the converter stages produce sufficient target electrons per incident primary electron. The required gain depends on the type of the tube and also on the type of the signal processing chosen. For EBS tubes, for example, it exceeds 10. The ideal case, in which all impinging electrons create uniform charge peaks at the target, is not obtainable for several reasons, and these will be discussed as they relate to a system with a scintillator, fiber-optic and photo-cathode combination as the first stage.


Author(s):  
L.E. Murr ◽  
A.B. Draper

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.


Sign in / Sign up

Export Citation Format

Share Document