June 1974 Conference on ?Operating Experience with Nuclear Power Plants and Ways of Further Development of the Nuclear Power Industry?

1974 ◽  
Vol 37 (3) ◽  
pp. 996-999 ◽  
Author(s):  
V. V. Frolov
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Operating Experience ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Further Development

scholarly journals QSL: Subliminal Messaging by the Nuclear Industry in Germany during the 1980s

Heritage ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 2054-2080
Author(s):  
Dirk H. R. Spennemann
Keyword(s):  
Public Relations ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Power Industry ◽  
Nuclear Industry ◽  
Nuclear Power Industry ◽  
Nuclear Movement ◽  
Political Pressure ◽  
Amateur Radio

During the late 1970s and early 1980s, the German nuclear power industry came under considerable socio-political pressure from the growing environmental and anti-nuclear movement. As part of a diversified public relations strategy, the Kraftwerk Union (KWU, later Siemens) as the main manufacturer of nuclear power plants distributed pre-printed QSL cards to amateur radio enthusiasts. These cards carried images of the latest nuclear power plants built by KWU. This paper examines the history, iconography and distribution of these QSL cards in the context of the heritage of the German nuclear power industry. It is the first study of its kind to examine the heritage significance of QSL cards.

scholarly journals Effect of Depreciation Method for Long-Term Tangible Assets on Sustainable Management: From a Nuclear Power Generation Cost Perspective under the Nuclear Phase-Out Policy

2021 ◽  
Vol 13 (9) ◽  
pp. 5270
Author(s):  
SungSig Bang ◽  
SangYun Park
Keyword(s):  
Power Generation ◽  
Sustainable Management ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Capacity Factor ◽  
Nuclear Phase ◽  
Phase Out

The Korean Government has been implementing a nuclear phase-out policy since 2017. Nuclear power plants accounted for 30.0% of the total power generation in 2016; this figure fell to 25.9% at the end of 2019, and the average Capacity Factor (CF) of a nuclear power plant approximately dropped from 89.1% to 69.2%. The nuclear phase-out policy presents severe consequences for the sustainable management of the nuclear power industry. Accordingly, the purpose of this study is to analyze the effect of a decrease in the nuclear capacity factor under the nuclear phase-out policy on the depreciation cost per unit using the Straight-Line Method (SLM) and Decelerated Depreciation Method (DDM) and to provide recommendations from a sustainable management perspective. The results show that the decrease in CF of nuclear power plants has a negative impact on sustainable development of the nuclear power industry. DDM is more beneficial than the SLM during this initial stage of depreciation under the nuclear phase-out policy. In addition, in the early stages of projects or immediately after attracting large-scale investments, DDM can offer more positive signs for stockholders by calculating a smaller net loss or a higher net profit.

scholarly journals The governance of nuclear power in China

2020 ◽  
Vol 13 (1) ◽  
pp. 23-46
Author(s):  
Philip Andrews-Speed
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Power Industry ◽  
Nuclear Safety ◽  
The Body ◽  
Nuclear Power Industry ◽  
High Rate ◽  
Energy Agency ◽  
The Government

Abstract China has the third largest fleet of nuclear power plants in the world, totalling more than 45 GWe at the end of 2019. With the current high rate of growth, its capacity will soon overtake that of France. The country’s nuclear power industry has suffered no serious accidents to date. Nevertheless, the poor safety record of some other heavy industries in China, combined with the rapid growth of civil nuclear power capacity, has raised concerns over the industry’s ability to prevent a serious accident. The organization, development and governance of China’s nuclear power industry reflects the high strategic importance that the government has placed on the industry over several decades. At the same time, it has taken steps to address domestic and international concerns over its ability to effectively govern nuclear safety and security. The country has become party to most major treaties and conventions relating to nuclear matters and has frequent interaction with the International Atomic Energy Agency. Despite many significant steps taken by the government, a number of questions remain concerning: the capacity and independence of the National Nuclear Safety Administration; the relatively incoherent nature of the body of laws, regulations and rules that govern nuclear safety and security; the absence of a clear legal basis for managing civil nuclear liability, especially in the context of an accident with transboundary consequences; and the quality of public participation, especially in the case of planned nuclear power plants.

Requirements for Accreditation (Appraisal) of NDT Laboratories in Nuclear Power Industry

NDT World ◽  
2021 ◽  
pp. 29-31
Author(s):  
Aleksey Polkovnikov
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Materials Science ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Conformity Assessment ◽  
Measurement Condition ◽  
Testing Laboratories

In the nuclear power industry, there are various requirements for NDT laboratories depending on the type of work performed. The article reviews the following types of appraisal: 1) laboratory appraisal at the head materials science organization; 2) appraisal of NDT laboratories during the construction of nuclear power plants; 3) evaluation of the measurement condition in testing laboratories; accreditation of testing laboratories for product conformity assessment. The study concludes that presence of various requirements for NDT laboratories in the nuclear power industry introduces a certain ambiguity in obtaining the needed certificates

scholarly journals Licensing Renewed

2007 ◽  
Vol 129 (10) ◽  
pp. 26-30 ◽  
Author(s):  
Bridget Mintz Testa
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
The United States ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Past Generation ◽  
Plant Site ◽  
Technical Issues ◽  
First Time

This article reviews that for the first time in a generation, utilities are starting the regulatory process to build nuclear reactors. There has been a virtual moratorium on new nuclear power plants in the United States during the past generation, and it has many causes. But one significant factor in the industry's decline was the Nuclear Regulatory Commission’s licensing process. There are now dozens of applications being submitted and approved for 20-year license renewals for established nuclear power plants. But before the nuclear power industry truly can be said to be reborn, new reactors must be constructed. The new rules allow for an early site permit and for a separate combined construction and operating license. Although the commission invited the nuclear power industry to test the two new processes when they were first announced, no company volunteered. One of the thorniest technical issues faced by the early applicants so far involves a new way of calculating, for a specific plant site, the ground motion that would result from a seismic event. When older plants were designed and built, the best available technique for these calculations was deterministic.

Digital I&C Operating Experience in the US

2008 ◽  
Author(s):  
Bruce Geddes ◽  
Ray Torok
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Failure Modes ◽  
Operating Experience ◽  
Data Set ◽  
Common Cause ◽  
Hardware Failure ◽  
Common Cause Failure ◽  
Defensive Measures

The Electric Power Research Institute (EPRI) is conducting research in cooperation with the Nuclear Energy Institute (NEI) regarding Operating Experience of digital Instrumentation and Control (I&C) systems in US nuclear power plants. The primary objective of this work is to extract insights from US nuclear power plant Operating Experience (OE) reports that can be applied to improve Diversity and Defense in Depth (D3) evaluations and methods for protecting nuclear plants against I&C related Common Cause Failures (CCF) that could disable safety functions and thereby degrade plant safety. Between 1987 and 2007, over 500 OE events involving digital equipment in US nuclear power plants were reported through various channels. OE reports for 324 of these events were found in databases maintained by the Nuclear Regulatory Commission (NRC) and the Institute of Nuclear Power Operations (INPO). A database was prepared for capturing the characteristics of each of the 324 events in terms of when, where, how, and why the event occurred, what steps were taken to correct the deficiency that caused the event, and what defensive measures could have been employed to prevent recurrence of these events. The database also captures the plant system type, its safety classification, and whether or not the event involved a common cause failure. This work has revealed the following results and insights: - 82 of the 324 “digital” events did not actually involve a digital failure. Of these 82 non-digital events, 34 might have been prevented by making full use of digital system fault tolerance features. - 242 of the 324 events did involve failures in digital systems. The leading contributors to the 242 digital failures were hardware failure modes. Software change appears as a corrective action twice as often as it appears as an event root cause. This suggests that software features are being added to avoid recurrence of hardware failures, and that adequately designed software is a strong defensive measure against hardware failure modes, preventing them from propagating into system failures and ultimately plant events. 54 of the 242 digital failures involved a Common Cause Failure (CCF). - 13 of the 54 CCF events affected safety (1E) systems, and only 2 of those were due to Inadequate Software Design. This finding suggests that software related CCFs on 1E systems are no more prevalent than other CCF mechanisms for which adherence to various regulations and standards is considered to provide adequate protection against CCF. This research provides an extensive data set that is being used to investigate many different questions related to failure modes, causes, corrective actions, and other event attributes that can be compared and contrasted to reveal useful insights. Specific considerations in this study included comparison of 1E vs. non-1E systems, active vs. potential CCFs, and possible defensive measures to prevent these events. This paper documents the dominant attributes of the evaluated events and the associated insights that can be used to improve methods for protecting against digital I&C related CCFs, applying a test of reasonable assurance.

scholarly journals Nuclear Power: Time to Start Again

2003 ◽  
Author(s):  
William D. Rezak
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Environmentally Friendly ◽  
Power Industry ◽  
Nuclear Industry ◽  
The Us ◽  
Generating Capacity

One of America’s best kept secrets is the success of its nuclear electric power industry. This paper presents data which support the construction and operating successes enjoyed by energy companies that operate nuclear power plants in the US. The result—the US nuclear industry is alive and well. Perhaps it’s time to start anew the building of nuclear power plants. Let’s take the wraps off the major successes achieved in the nuclear power industry. Over 20% of the electricity generated in the United States comes from nuclear power plants. An adequate, reliable supply of reasonably priced electric energy is not a consequence of an expanding economy and gross national product; it is an absolute necessity before such expansion can occur. It is hard to imagine any aspect of our business or personal lives not, in some way, dependent upon electricity. All over the world (in 34 countries) nuclear power is a low-cost, secure, safe, dependable, and environmentally friendly form of electric power generation. Nuclear plants in these countries are built in six to eight years using technology developed in the US, with good performance and safety records. This treatise addresses the success experienced by the US nuclear industry over the last 40 years, and makes the case that this reliable, cost-competitive source of electric power can help support the economic engine of the country and help prevent experiences like the recent crisis in California. Traditionally, the evaluation of electric power generation facility performance has focused on the ability of plants to produce at design capacity for high percentages of the time. Successful operation of nuclear facilities is determined by examining capacity or load factors. Load factor is the percentage of design generating capacity that a power plant actually produces over the course of a year’s operation. This paper makes the case that these operating performance indicators warrant renewed consideration of the nuclear option. Usage of electricity in the US now approaches total generating capacity. The Nuclear Regulatory Commission has pre-approved construction and operating licenses for several nuclear plant designs. State public service commissions are beginning to understand that dramatic reform is required. The economy is recovering and inflation is minimal. It’s time, once more, to turn to the safe, reliable, environmentally friendly nuclear power alternative.

The Integrated Aging Management System Applied to Nuclear Power Plants in Korea

2013 ◽  
Author(s):  
Se-Youl Won ◽  
Kyeong-Soo Lee ◽  
Jae-Gon Lee
Keyword(s):  
Management System ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Operating Experience ◽  
Evaluation Report ◽  
Time Operation ◽  
Standard Guideline ◽  
Periodic Safety ◽  
Long Time

According to Post Fukushima action items in Korea, KHNP has established the integrated aging management system to reinforce aging management of system, structures, and components (SSCs) effectively for seven operating units, which are in service for more than twenty years, and for Kori Unit 1 and Wolsung Unit 1, which are subject to continued operation (CO) based on NUREG-1801 GALL report. KHNP’s integrated aging management programs (AMPs) focus on the establishment of aging management system for long-lived operation of nuclear power plants in Korea. The integrated aging management system consists of the integrated AMP standard guideline, operating guideline for each plant, individual AMPs of each plant, and AMP Data Base (DB) system including implementation results, basic DB information related to facilities operating in NPPs, and operating information such as operating experience and evaluation report. The integrated aging management system is importantly utilized for Periodic Safety Review (PSR) and the renewal of CO. Therefore, it will be largely contributed to keep NPPs the level of safety for long time operation through the effective aging management.

Sign in / Sign up

Export Citation Format

Share Document