Effect of combined extrusion parameters on mechanical properties of basalt fiber-reinforced plastics based on polypropylene

1997 ◽  
Vol 33 (6) ◽  
pp. 600-603 ◽  
Author(s):  
P. I. Bashtannik ◽  
V. G. Ovcharenko ◽  
Yu. A. Boot
Keyword(s):  
Mechanical Properties ◽  
Basalt Fiber ◽  
Fiber Reinforced ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics

Wear Mechanism of Unidirectionally Oriented Fiber-Reinforced Plastics

1977 ◽  
Vol 99 (4) ◽  
pp. 401-407 ◽  
Author(s):  
T. Tsukizoe ◽  
N. Ohmae
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Wear Behavior ◽  
High Modulus ◽  
Fiber Reinforced ◽  
Reinforced Plastics ◽  
Sliding Direction ◽  
Oriented Fiber ◽  
Fiber Reinforcements ◽  
Fiber Reinforced Plastics

Wear between unidirectionally oriented fiber-reinforced-plastics and mild steel has been investigated. The wear behavior was found to be greatly influenced by the sliding direction, the mechanical properties of fiber-reinforced-plastics and by the tribological properties of fiber-reinforcements or matrices. A summarization of wear-resistance of seven different kinds of fiber-reinforced-plastics signified that the epoxy resin reinforced with high-modulus carbon fibers was the best wear-resistant fiber-reinforced-plastics.

scholarly journals Delamination Study in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1418 ◽  
Author(s):  
Maria Navarro-Mas ◽  
Juan García-Manrique ◽  
Maria Meseguer ◽  
Isabel Ordeig ◽  
Ana Sánchez
Keyword(s):  
Tool Wear ◽  
Volume Fraction ◽  
End Milling ◽  
Basalt Fiber ◽  
Depth Of Cut ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics ◽  
Edge Trimming

Although there are many machining studies of carbon and glass fiber reinforced plastics, delamination and tool wear of basalt fiber reinforced plastics (BFRP) in edge trimming has not yet studied. This paper presents an end milling study of BFRP fabricated by resin transfer molding (RTM), to evaluate delamination types at the top layer of the machined edge with different cutting conditions (cutting speed, feed rate and depth of cut) and fiber volume fraction (40% and 60%). This work quantifies delamination types, using a parameter Sd/L, that evaluates the delamination area (Sd) and the length (L), taking into account tool position in the yarn and movement of yarns during RTM process, which show the random nature of delamination. Delamination was present in all materials with 60% of fiber volume. High values of tool wear did not permit to machine the material due to an excessive delamination. Type II delamination was the most usual delamination type and depth of cut has influence on this type of delamination.

scholarly journals The Effects of Weathering on Mechanical Properties of Glass Fiber Reinforced Plastics (Grp) Materials

1970 ◽  
Vol 1 (2) ◽  
Author(s):  
H. Abdullah ◽  
S. Al Araimi and R. A. Siddiqui
Keyword(s):  
Mechanical Properties ◽  
Relative Humidity ◽  
Ultraviolet Radiation ◽  
Glass Fiber ◽  
Exposure Time ◽  
Atmospheric Conditions ◽  
Fiber Reinforced ◽  
Reinforced Plastics ◽  
Glass Fiber Reinforced ◽  
Fiber Reinforced Plastics

Glass fiber reinforced plastics composite is extensively used as a structural material for pools, oil pipes and tanks because it has good corrosion resistance properties.  The effects of weathering on the mechanical properties of glass fiber reinforced plastics (GRP) in the Sultanate of Oman have been studied.  The tensile and three point bend specimens were exposed to outdoor conditions (open atmosphere) in sunlight and tested for various intervals of time.  It was observed that as the exposure time to sunlight, ultraviolet radiation and dust increases the mechanical properties of GRP materials decrease.  The effects of relative humidity (%RH) on the mechanical properties were also studied. It was found that as the relative humidity increased in the atmosphere during the exposure time, the tensile strength, flexural strength and modulus of elasticity are lowered. This work has revealed that the decrease in the mechanical properties of GRP under weathering conditions is subjected to atmospheric conditions such as humidity, temperature, ultraviolet radiation and pollutant.Key Words: Weathering, Glass-Fiber Reinforced Plastics, Degradation

Composite Sandwich with Aluminum Foam Core and Adhesive Bonded Carbon Fiber Reinforced Thermoplastic Cover Layer

2017 ◽  
Vol 744 ◽  
pp. 277-281 ◽  
Author(s):  
Alexander Hackert ◽  
Claudia Drebenstedt ◽  
Tristan Timmel ◽  
Tomasz Osiecki ◽  
Lothar Kroll
Keyword(s):  
Mechanical Properties ◽  
Aluminum Foam ◽  
New Technologies ◽  
Bending Stiffness ◽  
Metal Composite ◽  
Fiber Reinforced ◽  
Metal Composites ◽  
Reinforced Plastics ◽  
Composite Sandwich ◽  
Fiber Reinforced Plastics

The combination of metals and fiber reinforced plastics is also known as hybrid metal composites. They offer the fusion of the good static mechanical properties of the fiber reinforced plastics and the good dynamic mechanical properties of the metal. For that reason, parts made of hybrid metal composites are predestined for the use as load relevant parts. The purpose of this study was to develop new technologies for semi finished hybrid metal composite materials. Thermoplastic Fiber-Reinforced Composites (TP-FRC) were arranged with new, isotropic, closed pore Aluminum Foam (AF) structures to an Extrinsically Combined Composite Sandwich (ECCS) by adhesive bonding. They form the basis for novel weight-optimized as well as cost-effective applications. The entire manufacturing process for the continuous semi-finished product was examined and verified according DIN EN 2563. This was done with regard to subsequent characterization by the specific bending modulus and specific bending stiffness. The examinations show a high bending stiffness and high strength structures combined with excellent damping properties at high damage tolerances. These are the most requested in automotive applications.

scholarly journals Effects of Nano Organoclay and Wax on the Machining Temperature and Mechanical Properties of Carbon Fiber Reinforced Plastics (CFRP)

2019 ◽  
Vol 3 (3) ◽  
pp. 85 ◽  
Author(s):  
El-Ghaoui ◽  
Chatelain ◽  
Ouellet-Plamondon ◽  
Mathieu
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Polycrystalline Diamond ◽  
Fiber Reinforced ◽  
Cfrp Laminates ◽  
Carbon Fiber Reinforced Plastics ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics ◽  
Carbon Fiber Reinforced ◽  
Pcd Tools

Carbon fiber reinforced plastics (CFRP) are appreciated for their high mechanical properties and lightness. Due to their heterogeneous nature, CFRP machining remains delicate. Damages are caused on the material and early tool wear occurs. The present study aims to evaluate the effects of fillers on CFRP machinability and mechanical behavior. CFRP laminates were fabricated by the vacuum assisted resin transfer molding (VARTM) process, using a modified epoxy resin. Three fillers (organoclay, hydrocarbon wax, and wetting agent) were mixed with the resin prior to the laminate infusion. Milling tests were performed with polycrystalline diamond (PCD) tools, equipped with thermocouples on their teeth. Machinability was then studied through the cutting temperatures and forces. Tensile, flexural, and short-beam tests were carried out on all samples to investigate the effects of fillers on mechanical properties. Fillers, especially wax, allowed us to observe an improvement in machinability. The best improvement was observed with 1% wax and 2% organoclay, which allowed a significant decrease in the cutting forces and the temperatures, and no deteriorations were seen on mechanical properties. These results demonstrate that upgrades to CFRP machining through the addition of nanoclays and wax is a path to explore.

Sign in / Sign up

Export Citation Format

Share Document