scholarly journals MHV graviton scattering amplitudes and current algebra on the celestial sphere

2021 ◽  
Vol 2021 (2) ◽  
Author(s):  
Shamik Banerjee ◽  
Sudip Ghosh ◽  
Partha Paul

Abstract The Cachazo-Strominger subleading soft graviton theorem for a positive helicity soft graviton is equivalent to the Ward identities for $$ \overline{\mathrm{SL}\left(2,\mathrm{\mathbb{C}}\right)} $$ SL 2 ℂ ¯ currents. This naturally gives rise to a $$ \overline{\mathrm{SL}\left(2,\mathrm{\mathbb{C}}\right)} $$ SL 2 ℂ ¯ current algebra living on the celestial sphere. The generators of the $$ \overline{\mathrm{SL}\left(2,\mathrm{\mathbb{C}}\right)} $$ SL 2 ℂ ¯ current algebra and the supertranslations, coming from a positive helicity leading soft graviton, form a closed algebra. We find that the OPE of two graviton primaries in the Celestial CFT, extracted from MHV amplitudes, is completely determined in terms of this algebra. To be more precise, 1) The subleading terms in the OPE are determined in terms of the leading OPE coefficient if we demand that both sides of the OPE transform in the same way under this local symmetry algebra. 2) Positive helicity gravitons have null states under this local algebra whose decoupling leads to differential equations for MHV amplitudes. An n point MHV amplitude satisfies two systems of (n − 2) linear first order PDEs corresponding to (n − 2) positive helicity gravitons. We have checked, using Hodges’ formula, that one system of differential equations is satisfied by any MHV amplitude, whereas the other system has been checked up to six graviton MHV amplitude. 3) One can determine the leading OPE coefficients from these differential equations.This points to the existence of an autonomous sector of the Celestial CFT which holographically computes the MHV graviton scattering amplitudes and is completely defined by this local symmetry algebra. The MHV-sector of the Celestial CFT is like a minimal model of 2-D CFT.

2021 ◽  
Vol 2021 (10) ◽  
Author(s):  
Shamik Banerjee ◽  
Sudip Ghosh

Abstract We show that the Mellin transform of an n-point tree level MHV gluon scattering amplitude, also known as the celestial amplitude in pure Yang-Mills theory, satisfies a system of (n−2) linear first order partial differential equations corresponding to (n−2) positive helicity gluons. Although these equations closely resemble Knizhnik-Zamoldochikov equations for SU(N) current algebra there is also an additional “correction” term coming from the subleading soft gluon current algebra. These equations can be used to compute the leading term in the gluon-gluon OPE on the celestial sphere. Similar equations can also be written down for the momentum space tree level MHV scattering amplitudes. We also propose a way to deal with the non closure of subleading current algebra generators under commutation. This is then used to compute some subleading terms in the mixed helicity gluon OPE.


2021 ◽  
Vol 887 ◽  
pp. 557-563
Author(s):  
D.M. Mordasov ◽  
M.D. Mordasov

The spreading process of drying and coalescing nanodispersion was simulated using the method of analogies. A mathematical description of the energy processes in the proposed physical model was obtained in the form of a system of differential equations of the first order. A transition function that describes the dynamics of the change in the contact angle when the nanodispersion drop spreads was obtained as a result of solving the system of differential equations. The physical meaning of the transition function coefficients was established. Based on the analysis of the ratio of the transition function coefficients, a theoretical justification for the results of experiments on choosing the optimal amount of desiccant introduced into styrene-acrylic nanodispersion was given.


1979 ◽  
Vol 20 (12) ◽  
pp. 2619-2620
Author(s):  
C. Reina ◽  
M. Martellini ◽  
P. Sodano

2015 ◽  
Vol 07 (04) ◽  
pp. 1550057
Author(s):  
Boonchai Phungpaingam ◽  
Lawrence N. Virgin ◽  
Somchai Chucheepsakul

This paper presents the snap-through phenomenon and effect of self-contact of the spatial elastica subjected to mid-length torque. One end of the elastica is clamped while the other end is placed in a sleeve joint. The total arc-length of the elastica can be varied by sliding the end through the sleeve joint. At a certain value of total arc-length, the sleeve joint is clamped and an external torque is applied at the mid-length of the elastica. The system of governing differential equations is derived from the equilibrium of an elastica segment and geometric relations of the inextensible elastica. The transformation matrix formulated in terms of Euler parameters is utilized to avoid the kinematic singularity. To display the behavior of the elastica, the system of differential equations needs to be integrated numerically from one end to the other end. The integration is performed so that the boundary conditions and some constraint conditions of the problem are satisfied, i.e., a shooting method is used. The effect of self-contact is taken into account by considering the contact force as a point load applying at contact point. From the results, the snap-through phenomenon, effect of self-contact and equilibrium configurations are highlighted herein.


1979 ◽  
Vol 46 (3) ◽  
pp. 631-636 ◽  
Author(s):  
J. G. Simmonds ◽  
A. Libai

A set of first-order ordinary differential equations with initial conditions is derived for the exact, nonlinear, inextensional deformation of a loaded plate bounded by two straight edges and two curved ones. The analysis extends earlier approximate work of Mansfield and Kleeman, Ashwell, and Lin, Lin, and Mazelsky. For a plate clamped along one straight edge and subject to a force and couple along the other, there are 13 differential equations, but an independent set of 9 may be split off. In a subsequent paper, we consider alternate forms of these 9 equations for plates that twist as they deform. Their structure and solutions are compared to Mansfield’s approximate equations and particular attention is given to tip-loaded triangular plates.


2017 ◽  
Vol 21 (10) ◽  
pp. 40-46
Author(s):  
E.A. Sozontova

In this paper we consider the system of equations with partial integrals in three-dimensional space. The purpose is to find sufficient conditions of solvability of this system in quadratures. The proposed method is based on the reduction of the original system, first, to the Goursat problem for a system of differential equations of the first order, and after that to the three Goursat problems for differential equations of the third order. As a result, the sufficient conditions of solvability of the considering system in explicit form were obtained. The total number of cases discussing solvability is 16.


1968 ◽  
Vol 72 (696) ◽  
pp. 1068
Author(s):  
B. Dawson ◽  
M. Davies

A novel technique of dealing with differential eigenvalue problems has recently been introduced by Wadsworth and Wilde . The differential equation is expressed as a set of simultaneous first-order differential equations, the eigenvalueλbeing regarded as an additional variable by adding the equationto the basic set. The differential eigenvalue problem is thus reduced to a set of non-linear first-order differential equations with two-point boundary conditions. This treatment of the problem, although novel, suffers from two serious disadvantages. First, it introduces non-linearity into an otherwise linear set of equations. Thus, the solution can no longer be obtained by linear combinations of independent particular solutions. One method of solving the non-linear systems is by assigning arbitrary starting values at one boundary and performing a step-by-step integration to the other boundary where in general the boundary conditions are not satisfied. The problem can be solved by adjustment of the initial assigned arbitrary values until the given conditions at the other boundary are satisfied. A second method and the one used by Wadsworth and Wilde is to estimate the unknown boundary values at both boundaries and integrate inwards to a meeting point. Changes can then be made to the unknown boundary values to make the two branches of the curve fit together.


1979 ◽  
Vol 40 (C7) ◽  
pp. C7-127-C7-128
Author(s):  
F. Dothan ◽  
Yu. M. Kagan

The concentration of atomic and molecular ions and metastables is investigated for the positive column of a helium glow discharge. Recently (1,2) the system of differential equations for the helium afterglow describing the time change of these plasma parameters was written and solved. In the stationary positive column we can neglect some processes which are importent in the afterglow. On the other side we must take into account processes of excitation and ionization by electron collisions which can be neglected in the afterglow.


2021 ◽  
Vol 65 (3) ◽  
pp. 159-165

In this paper, inverse scattering problems for a system of differential equations of the first order are considered. The Marchenko approach is used to solve the inverse scattering problem. The system of Marchenko integral equations is reduced to a linear system of algebraic equations such that the solution of the resulting system yields to the unknown coefficients of the system of first-order differential equations. Illustrative examples are provided to demonstrate the preciseness and effectiveness of the proposed technique. The results are compared with the exact solution by using computer simulations.


Author(s):  
Mircea Bogdan Tătaru ◽  
Vladimir Dragoş Tătaru

AbstractThe paper presents a numerical method of kinematical analysis of the articulated quadrilateral mechanism. Starting from Euler’s relation concerning the distribution of speeds written in projections on the fixed reference system axes, a system of differential equations describing the movement of the mechanism was obtained. This system of differential equations was then solved using numerical integration methods and the variation with respect to time of the position kinematical parameters, of the velocities (the first order kinematical parameters), and of the accelerations (the second order kinematical parameters), was obtained. Matrix writing of the differential equations was used in order to make the differential equations set out in the paper easier to solve using the electronic computer.


Sign in / Sign up

Export Citation Format

Share Document