Time-scales of recent Phlegrean Fields eruptions inferred from the application of a ‘diffusive fractionation’ model of trace elements

2010 ◽  
Vol 72 (4) ◽  
pp. 431-447 ◽  
Author(s):  
Diego Perugini ◽  
Giampiero Poli ◽  
Maurizio Petrelli ◽  
Cristina P. De Campos ◽  
D. B. Dingwell
Keyword(s):  
Trace Elements ◽  
Time Scales ◽  
Phlegrean Fields ◽  
Fractionation Model

Microanalytical Identification of a New Zr-Nb-Fe Phase

1990 ◽  
Vol 48 (2) ◽  
pp. 132-133
Author(s):  
O.T. Woo ◽  
G.J.C. Carpenter
Keyword(s):  
Trace Elements ◽  
Cold Rolling ◽  
Proportionality Factor ◽  
Tube Material ◽  
X Ray ◽  
Metal Foils ◽  
Arc Melting ◽  
Intermetallic Particles ◽  
Intermetallic Precipitates ◽  
Cold Worked

To study the influence of trace elements on the corrosion and hydrogen ingress in Zr-2.5 Nb pressure tube material, buttons of this alloy containing up to 0.83 at% Fe were made by arc-melting. The buttons were then annealed at 973 K for three days, furnace cooled, followed by ≈80% cold-rolling. The microstructure of cold-worked Zr-2.5 at% Nb-0.83 at% Fe (Fig. 1) contained both β-Zr and intermetallic precipitates in the α-Zr grains. The particles were 0.1 to 0.7 μm in size, with shapes ranging from spherical to ellipsoidal and often contained faults. β-Zr appeared either roughly spherical or as irregular elongated patches, often extending to several micrometres.The composition of the intermetallic particles seen in Fig. 1 was determined using Van Cappellen’s extrapolation technique for energy dispersive X-ray analysis of thin metal foils. The method was employed to avoid corrections for absorption and fluorescence via the Cliff-Lorimer equation: CA/CB = kAB · IA/IB, where CA and CB are the concentrations by weight of the elements A and B, and IA and IB are the X-ray intensities; kAB is a proportionality factor.

XRMF applications of a monolithic, polycapillary, focusing x-ray optic

1996 ◽  
Vol 54 ◽  
pp. 240-241
Author(s):  
D. A. Carpenter ◽  
Ning Gao ◽  
G. J. Havrilla
Keyword(s):  
Trace Elements ◽  
Point Source ◽  
Focal Spot ◽  
Fluorescence Analysis ◽  
X Rays ◽  
Focal Distance ◽  
Spot Diameter ◽  
X Ray ◽  
Focal Spot Diameter

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.

LVSEM: Past Present and Future

1990 ◽  
Vol 48 (1) ◽  
pp. 364-365
Author(s):  
James B. Pawley
Keyword(s):  
Field Emission ◽  
Line Width ◽  
Time Scales ◽  
Silicon Oxide ◽  
Beam Current ◽  
High Brightness ◽  
High Beam ◽  
Fixed Charges ◽  
Beam Voltage ◽  
Deposited Metal

Past: In 1960 Thornley published the first description of SEM studies carried out at low beam voltage (LVSEM, 1-5 kV). The aim was to reduce charging on insulators but increased contrast and difficulties with low beam current and frozen biological specimens were also noted. These disadvantages prevented widespread use of LVSEM except by a few enthusiasts such as Boyde. An exception was its use in connection with studies in which biological specimens were dissected in the SEM as this process destroyed the conducting films and produced charging unless LVSEM was used.In the 1980’s field emission (FE) SEM’s came into more common use. The high brightness and smaller energy spread characteristic of the FE-SEM’s greatly reduced the practical resolution penalty associated with LVSEM and the number of investigators taking advantage of the technique rapidly expanded; led by those studying semiconductors. In semiconductor research, the SEM is used to measure the line-width of the deposited metal conductors and of the features of the photo-resist used to form them. In addition, the SEM is used to measure the surface potentials of operating circuits with sub-micrometer resolution and on pico-second time scales. Because high beam voltages destroy semiconductors by injecting fixed charges into silicon oxide insulators, these studies must be performed using LVSEM where the beam does not penetrate so far.

Trace Elements and Iron in Human Metabolism

1979 ◽  
Vol 7 (6) ◽  
pp. 1330-1331
Author(s):  
E. D. WILLS
Keyword(s):  
Trace Elements ◽  
Human Metabolism

Meat and Meat Products Consumption in Italy: Contribution to Trace Elements, Heme Iron and selected B Vitamins supply

2004 ◽  
Vol 74 (4) ◽  
pp. 247-251 ◽  
Author(s):  
Lombardi-Boccia ◽  
Lanzi ◽  
Lucarini ◽  
Di Lullo
Keyword(s):  
Trace Elements ◽  
Daily Intake ◽  
Meat Products ◽  
Heme Iron ◽  
B Vitamins ◽  
Zinc Intake ◽  
Consumption Frequency ◽  
Iron And Zinc ◽  
Iron Heme ◽  
Daily Intakes

This study was undertaken to estimate the contribution of meat and meat products consumption to the daily intakes of trace elements (Fe, Zn, Cu, Se), heme iron, and selected B vitamins (thiamine, riboflavin, niacin) in Italy. Meat and meat products were selected on the basis of their consumption frequency reported by the most recent nationwide dietary individual survey carried out in Italy (INN-CA study). The daily intakes of total iron and heme iron were 1.65 and 1.13 mg/person/day. Zinc intake was 3.65 mg/person/day. Beef made the main contribution to iron, heme iron, and zinc daily intakes. Copper daily intake was 107.3 mug/person/day, with meat products provided the highest contribution (40 mug/person/day). Daily intake of selenium (7.14 mug/person/day) was provided mainly by poultry consumption. Thiamine intake was 228 mug/person/day, and meat products were the main source (110 mug/person/day). Riboflavin intake was 136 mug/person/day, with both beef and meat products as the main contributors (40 mug/person/day). Niacin intake was 7.53 mg/person/day, and poultry was the main source (2.28 mg/person/day). Meat and meat products were a valuable source of micronutrients, supplying 47, 48, and 24% of zinc, niacin, and thiamin daily requirements, respectively, and over 10% of iron, copper, selenium, and riboflavin daily average requirement values of the italian RDAs calculated for the population involved in the survey (INN-CA study).

Pre-concentration of selected trace elements from seawater by co-precipitation on Mg(OH)2

2003 ◽  
Vol 107 ◽  
pp. 945-948 ◽  
Author(s):  
P. M. Nicolaysen ◽  
E. Steinnes ◽  
T. E. Sjobakk
Keyword(s):  
Trace Elements ◽  
Co Precipitation

Gamma-Ray Spectrometric Analysis of Some Trace Elements in the Human Articular Disc of the Mandible

1963 ◽  
Vol 03 (02) ◽  
pp. 175-182 ◽  
Author(s):  
Bo Bergman ◽  
Rune Söremark
Keyword(s):  
Trace Elements ◽  
Neutron Activation ◽  
Quantitative Data ◽  
Thermal Neutron Flux ◽  
Gamma Ray ◽  
Dry Weight ◽  
Gamma Ray Spectrometry ◽  
Spectrometric Analysis ◽  
Articular Disc ◽  
Group Separation

SummaryBy means of neutron activation and gamma-ray spectrometry the concentrations in the human mandibular articular disc of the following elements have been determined: Na, Mn, Cu, Zn, Rb, Sr, Cd, W, and Au. The discs were obtained at necropsy from seven men and nine women, ranging in age from 56 to 71 years.The activation was carried out in a thermal neutron flux of about 1.7 XlO12 neutrons × cm−2 × sec.−1 for about 20 hours. A chemical group separationwas performed before the gamma-ray spectrometry. Quantitative data based on the dry weight of the cartilage samples were obtained by comparing the photo-peak area of the identified elements with those of appropriate standards.

Sign in / Sign up

Export Citation Format

Share Document