scholarly journals A thermo-viscoplasticity model for metals over wide temperature ranges- application to case hardening steel

2021 ◽  
Author(s):  
Philip Oppermann ◽  
Ralf Denzer ◽  
Andreas Menzel
Keyword(s):  
Yield Stress ◽  
Coefficient Of Thermal Expansion ◽  
Cold Work ◽  
Second Law Of Thermodynamics ◽  
Element Model ◽  
Yield Function ◽  
Model Parameters ◽  
Case Hardening ◽  
Rate Dependency ◽  
Case Hardening Steel

AbstractIn this contribution, a model for the thermomechanically coupled behaviour of case hardening steel is introduced with application to 16MnCr5 (1.7131). The model is based on a decomposition of the free energy into a thermo-elastic and a plastic part. Associated viscoplasticity, in terms of a temperature-depenent Perzyna-type power law, in combination with an isotropic von Mises yield function takes respect for strain-rate dependency of the yield stress. The model covers additional temperature-related effects, like temperature-dependent elastic moduli, coefficient of thermal expansion, heat capacity, heat conductivity, yield stress and cold work hardening. The formulation fulfils the second law of thermodynamics in the form of the Clausius–Duhem inequality by exploiting the Coleman–Noll procedure. The introduced model parameters are fitted against experimental data. An implementation into a fully coupled finite element model is provided and representative numerical examples are presented showing aspects of the localisation and regularisation behaviour of the proposed model.

Using Data Sampling and Inverse Optimization for the Reduction of the Experimental Effort in the Characterization of Hot Working Behaviour for a Case Hardening Steel

2015 ◽  
Vol 651-653 ◽  
pp. 1351-1356
Author(s):  
Alexander Kraemer ◽  
Johannes Lohmar ◽  
Markus Bambach ◽  
Gerhard Hirt
Keyword(s):  
Hot Working ◽  
Parameter Determination ◽  
Model Parameters ◽  
Case Hardening ◽  
Data Sampling ◽  
Flow Curves ◽  
Full Matrix ◽  
Case Hardening Steel ◽  
Experimental Effort

For the full characterization of the hot working behaviour of a given material a large number of laboratory experiments have to be performed. The experiments themselves are time consuming and the required specimen material can be quite expensive. With the increasing versatility of the testing machines, like dilatometry with easily variable temperatures, overthinking the classical approaches for materials characterization becomes expedient.In this paper a new technique for the reduction of the experimental effort is presented at the example of a 25MoCrS4 case hardening steel. To analyse the potential for the reduction of the experimental effort the classical approach of a full experimental test matrix is chosen. Here 55 flow curves with temperatures between 700 and 1200°C and strain rates from 0.01 to 100/s are experimentally determined. Then a semi-empirical model for strain hardening and dynamic recrystallization is fitted using an automated routine for parameter determination, taking all available flow curves into account. Subsequently, the number of flow curves used to fit the model parameters is gradually reduced. The model accuracy obtained with the reduced experimental data is compared to the initial fit. The natural decrease in accuracy with the use of less data compared to the gain due to the reduction of experimental effort is analysed. In addition optimal distribution of the sampling points in the experimental matrix for a reduced number of experiments is discussed. It is shown that less than a quarter of the full matrix is sufficient to reach accuracies comparable to using the full matrix. Using the vertices and symmetrical distribution of the data within the full experimental matrix allows a drastic reduction of experimental effort while maintaining the initial accuracy. The results suggest that it might be possible to reduce the costs and effort for material characterization by 50-80%.

AISI 4320

Alloy Digest ◽  
1959 ◽  
Vol 8 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
Case Hardening ◽  
High Toughness ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Shock Resistance ◽  
Case Hardening Steel

Abstract AISI 4320 is a nickel-chromium-molybdenum case hardening steel having high toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-80. Producer or source: Alloy steel mills and foundries.

AISI 8615

Alloy Digest ◽  
1965 ◽  
Vol 14 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Alloy Steel ◽  
Heat Treating ◽  
Case Hardening ◽  
Low Carbon ◽  
Heavy Duty ◽  
Core Strength ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Case Hardening Steel

Abstract AISI 8615 is a low-carbon, nickel-chromium-molybdenum alloy steel capable of producing high core strength and toughness. It is a case hardening steel recommended for heavy duty gears, cams, shafts, chains, fasteners, piston pins, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-180. Producer or source: Alloy steel mills and foundries.

AISI 3120

Alloy Digest ◽  
1960 ◽  
Vol 9 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Case Hardening ◽  
Low Carbon ◽  
Steel Mills ◽  
Shock Resistance ◽  
Case Hardening Steel

Abstract AISI 3120 is a low-carbon, chromium-nickel case-hardening steel offering good toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-97. Producer or source: Alloy steel mills and foundries.

scholarly journals Process chain for the manufacture of hybrid bearing bushings

2021 ◽  
Vol 15 (2) ◽  
pp. 137-150
Author(s):  
Susanne Elisabeth Thürer ◽  
Anna Chugreeva ◽  
Norman Heimes ◽  
Johanna Uhe ◽  
Bernd-Arno Behrens ◽  
...  
Keyword(s):  
Extrusion Process ◽  
Steel Tube ◽  
Case Hardening ◽  
Process Chain ◽  
Forming Process ◽  
Die Forging ◽  
Material Contact ◽  
Hybrid Bearing ◽  
Case Hardening Steel ◽  
Tailored Forming

AbstractThe current study presents a novel Tailored Forming process chain developed for the production of hybrid bearing bushings. In a first step, semi-finished products in the form of locally reinforced hollow profiles were produced using a new co-extrusion process. For this purpose, a modular tool concept was developed in which a steel tube made of a case-hardening steel, either C15 (AISI 1015) or 20MnCr5 (AISI 5120), is fed laterally into the tool. Inside the welding chamber, the steel tube is joined with the extruded aluminum alloy EN AW-6082. In the second step, sections from the compound profiles were formed into hybrid bearing bushings by die forging. In order to set the required forming temperatures for each material—aluminum and steel—simultaneously, a tailored heating strategy was developed, which enabled successful die forging of the hybrid workpiece to the desired bearing bushing geometry. Using either of the case-hardening steels in combination with aluminum, this novel process chain made it possible to produce intact hybrid bearing bushings, which showed both macroscopically and microscopically intimate material contact inside the compound zone.

scholarly journals Carbon Particle In-Situ Alloying of the Case-Hardening Steel 16MnCr5 in Laser Powder Bed Fusion

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 896
Author(s):  
Matthias Schmitt ◽  
Albin Gottwalt ◽  
Jakob Winkler ◽  
Thomas Tobie ◽  
Georg Schlick ◽  
...  
Keyword(s):  
Laser Beam ◽  
Mechanical Strength ◽  
Carbon Content ◽  
Metal Powder ◽  
Case Hardening ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Carbon Particles ◽  
Case Hardening Steel

The carbon content of steel affects many of its essential properties, e.g., hardness and mechanical strength. In the powder bed fusion process of metals using a laser beam (PBF-LB/M), usually, pre-alloyed metal powder is solidified layer-by-layer using a laser beam to create parts. A reduction of the carbon content in steels is observed during this process. This study examines adding carbon particles to the metal powder and in situ alloying in the PBF-LB/M process as a countermeasure. Suitable carbon particles are selected and their effect on the particle size distribution and homogeneity of the mixtures is analysed. The workability in PBF-LB is then shown. This is followed by an evaluation of the resulting mechanical properties (hardness and mechanical strength) and microstructure in the as-built state and the state after heat treatment. Furthermore, potential use cases like multi-material or functionally graded parts are discussed.

Sign in / Sign up

Export Citation Format

Share Document