A design concept of active cooling for tailored forming workpieces during induction heating

The demand for lightweight construction is constantly increasing. One approach to meet this challenge is the development of hybrid components made of dissimilar materials. The use of the hybrid construction method for bulk components has a high potential for weight reduction and increased functionality. However, forming workpieces consisting of dissimilar materials requires specific temperature profiles for achieving sufficient formability. This paper deals with the development of a specific heating and cooling strategy to generate an inhomogeneous temperature distribution in hybrid workpieces. Firstly, the heating process boundaries with regard to temperature parameters required for a successful forming are experimentally defined. Secondly, a design based on the obtained cooling strategy is developed. Next a modelling embedded within an electro-thermal framework provides the basis for a numerical determination of admissible cooling rates to fulfil the temperature constraint. Here, the authors illustrate an algorithmic approach for the optimisation of cooling parameters towards an effective minimum, required for applicable forming processes of tailored forming.

Process chain for the manufacture of hybrid bearing bushings

The current study presents a novel Tailored Forming process chain developed for the production of hybrid bearing bushings. In a first step, semi-finished products in the form of locally reinforced hollow profiles were produced using a new co-extrusion process. For this purpose, a modular tool concept was developed in which a steel tube made of a case-hardening steel, either C15 (AISI 1015) or 20MnCr5 (AISI 5120), is fed laterally into the tool. Inside the welding chamber, the steel tube is joined with the extruded aluminum alloy EN AW-6082. In the second step, sections from the compound profiles were formed into hybrid bearing bushings by die forging. In order to set the required forming temperatures for each material—aluminum and steel—simultaneously, a tailored heating strategy was developed, which enabled successful die forging of the hybrid workpiece to the desired bearing bushing geometry. Using either of the case-hardening steels in combination with aluminum, this novel process chain made it possible to produce intact hybrid bearing bushings, which showed both macroscopically and microscopically intimate material contact inside the compound zone.

Introduction to tailored forming

In recent years, the requirements for technical components have been increasing steadily. This development is intensified by the desire for products with lower weight, smaller size and extended functionality, but at the same time higher resistance against specific loads. Mono-material components manufactured according to established processes reach their limits regarding conflicting requirements. It is, for example, hardly possible to combine excellent mechanical properties with lightweight construction using mono-materials. Thus, a significant increase in production quality, lightweight design, functionality and efficiency can only be reached by combining different materials in one component. The superior aim of the Collaborative Research Centre (CRC) 1153 is to develop novel process chains for the production of hybrid solid components. In contrast to existing process chains in bulk metal forming, in which the joining process takes place during forming or at the end of the process chain, the CRC 1153 uses tailored semi-finished workpieces which are joined before the forming process. This results in a geometric and thermomechanical influence on the joining zone during the forming process which cannot be created by conventional joining techniques. The present work gives an overview of the CRC and the Tailored Forming approach including the applied joining, forming and finishing processes as well as a short summary of the accompanying design and evaluation methods.

Computer-Aided Engineering Environment for Designing Tailored Forming Components

The use of multi-material forming components makes it possible to produce components adapted to the respective requirements, which have advantages over mono-material components. The necessary consideration of an additional material increases the possible degrees of freedom in product and manufacturing process development. As a result, development becomes more complex and special expert knowledge is required. To counteract this, computer-aided engineering environments with knowledge-based tools are increasingly used. This article describes a computer-aided engineering environment (CAEE) that can be used to design hybrid forming components that are produced by tailored forming, a process chain developed in the Collaborative Research Center (CRC) 1153. The CAEE consists of a knowledge base, in which the knowledge necessary for the design of tailored forming parts, including manufacturer restrictions, is stored and made available. For the generation of rough and detailed design and for elaboration the following methods are used. The topology optimization method, Interfacial Zone Evolutionary Optimization (IZEO), which determines the material distribution. The design of optimized joining zone geometries, by robust design. The elaboration of the components by means of highly flexible computer-aided design (CAD) models, which are built according to the generative parametric design approach (GPDA).

Enhancement of the interface of friction welded steel-aluminium joints

Lightweight multi-material components are of great importance for the transport industry. Not only the component’s weight can be decreased, but also its local properties can be adapted to different loading profiles. Tailored Forming is a novel concept for producing multi-material components. By using a joining process, the creation of a bond between different materials takes place in the first step of the process chain. In the subsequent steps, multi-material workpieces are processed in their joined state while maintaining or improving the joint strength. This study focuses on steel-aluminium joints, which were created by friction welding and further processed by induction heating and impact extrusion. A counter pressure superposition mechanism was implemented in the extrusion tooling to control the stress state during plastic deformation. Flow behaviours of steel and aluminium are largely different at a given temperature, which necessitates a near step-function temperature distribution in the hybrid billet to obtain matching flow stresses. An inductive heating strategy was developed which led to a temperature gradient in the billets before extrusion. Extruded billets were analysed by destructive testing methods and metallography. The bond could be maintained after extrusion when counter pressure superposition was used; but no improvement could be obtained. Without counter force superposition, however, cracks were observed in the joining interface and the joint strength decreased. This paper discusses the aforementioned findings in the current process design and makes suggestions on how the involved processes should be reconfigured to improve the joint strength.

Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored Forming

The production of multi-metal bulk components requires suitable manufacturing technologies. On the example of hybrid bevel gears featuring two different steels at the outer surface and on the inside, the applicability of the novel manufacturing technology of Tailored Forming was investigated. In a first processing step, a semi-finished compound was manufactured by cladding a substrate using a plasma transferred arc welding or a laser hotwire process. The resulting semi-finished workpieces with a metallurgical bond were subsequently near-net shape forged to bevel gears. Using the residual heat after the forging process, a process-integrated heat treatment was carried out directly after forming. For the investigations, the material combinations of 41Cr4 with C22.8 (AISI 5140/AISI 1022M) and X45CrSi9-3 with C22.8 (AISI HNV3/AISI 1022M) were applied. To reveal the influence of the single processing steps on the resulting interface, metallographic examinations, hardness measurements and micro tensile tests were carried out after cladding, forging and process-integrated heat treatment. Due to forging and heat-treatment, recrystallization and grain refinement at the interface and an increase in both, hardness and tensile strength, were observed.

Investigations on Tailored Forming of AISI 52100 as Rolling Bearing Raceway

Hybrid cylindrical roller thrust bearing washers of type 81212 were manufactured by tailored forming. An AISI 1022M base material, featuring a sufficient strength for structural loads, was cladded with the bearing steel AISI 52100 by plasma transferred arc welding (PTA). Though AISI 52100 is generally regarded as non-weldable, it could be applied as a cladding material by adjusting PTA parameters. The cladded parts were investigated after each individual process step and subsequently tested under rolling contact load. Welding defects that could not be completely eliminated by the subsequent hot forming were characterized by means of scanning acoustic microscopy and micrographs. Below the surface, pores with a typical size of ten µm were found to a depth of about 0.45 mm. In the material transition zone and between individual weld seams, larger voids were observed. Grinding of the surface after heat treatment caused compressive residual stresses near the surface with a relatively small depth. Fatigue tests were carried out on an FE8 test rig. Eighty-two percent of the calculated rating life for conventional bearings was achieved. A high failure slope of the Weibull regression was determined. A relationship between the weld defects and the fatigue behavior is likely.

Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge Rolling

The service life of rolling contacts is dependent on many factors. The choice of materials in particular has a major influence on when, for example, a ball bearing may fail. Within an exemplary process chain for the production of hybrid high-performance components through tailored forming, hybrid solid components made of at least two different steel alloys are investigated. The aim is to create parts that have improved properties compared to monolithic parts of the same geometry. In order to achieve this, several materials are joined prior to a forming operation. In this work, hybrid shafts created by either plasma (PTA) or laser metal deposition (LMD-W) welding are formed via cross-wedge rolling (CWR) to investigate the resulting thickness of the material deposited in the area of the bearing seat. Additionally, finite element analysis (FEA) simulations of the CWR process are compared with experimental CWR results to validate the coating thickness estimation done via simulation. This allows for more accurate predictions of the cladding material geometry after CWR, and the desired welding seam geometry can be selected by calculating the cladding thickness via CWR simulation.

Applying Membrane Mode Enhanced Cohesive Zone Elements on Tailored Forming Components

Forming of hybrid bulk metal components might include severe membrane mode deformation of the joining zone. This effect is not reflected by common Traction Separation Laws used within Cohesive Zone Elements that are usually applied for the simulation of joining zones. Thus, they cannot capture possible damage of the joining zone under these conditions. Membrane Mode Enhanced Cohesive Zone Elements fix this deficiency. This novel approach can be implemented in finite elements. It can be used within commercial codes where an implementation as a material model is beneficial as this simplifies model preparation with the existing GUIs. In this contribution, the implementation of Membrane Mode Enhanced Cohesive Zone Elements as a material model is presented within MSC Marc along with simulations showing the capabilities of this approach.