scholarly journals Ruthenium dioxide nanoparticles as a high-capacity transducer in solid-contact polymer membrane-based pH-selective electrodes

2019 ◽  
Vol 186 (12) ◽  
Author(s):  
Nikola Lenar ◽  
Beata Paczosa-Bator ◽  
Robert Piech
Keyword(s):  
High Capacity ◽  
Glass Electrode ◽  
Ruthenium Dioxide ◽  
Solid Contact ◽  
New Approach ◽  
Potentiometric Response ◽  
Small Resistance ◽  
Nernstian Slope ◽  
Capacity Transducer ◽  
Contact Electrodes

AbstractA new approach is presented for the design of ion selective electrodes. Ruthenium dioxide nanoparticles were incorporated into solid-contact electrodes, and their properties were studied for the case of pH-selective electrodes. The use of the RuO2 is shown to significantly improve the potentiometric response, while no redox response is observed. The use of RuO2 results in a Nernstian slope (59 mV/decade) towards hydrogen ions over a wide linear range (pH 2 to 12). The results obtained by chronopotentiometry reveal small resistance, and the capacitance is as high as 1.12 mF. This results in a good stability of the response and in a low potential drift (0.89 μV∙s−1). The electrodes exhibit properties nearly as excellent as those of a glass electrode, but they are much smaller, less fragile, and easy to use.

Potentiometric sensing utilizing paper-based microfluidic sampling

The Analyst ◽  
2014 ◽  
Vol 139 (9) ◽  
pp. 2133-2136 ◽  
Author(s):  
Jingwen Cui ◽  
Grzegorz Lisak ◽  
Sylwia Strzalkowska ◽  
Johan Bobacka
Keyword(s):  
Solid Contact ◽  
New Approach ◽  
Contact Electrodes

This communication presents a new approach to potentiometric sensing utilizing paper-based microfluidic sampling and solid-contact electrodes.

scholarly journals The Use of an Acylhydrazone-Based Metal-Organic Framework in Solid-Contact Potassium-Selective Electrode for Water Analysis

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 579
Author(s):  
Paweł Kościelniak ◽  
Marek Dębosz ◽  
Marcin Wieczorek ◽  
Jan Migdalski ◽  
Monika Szufla ◽  
...  
Keyword(s):  
Certified Reference Materials ◽  
Metal Organic Framework ◽  
Electrochemical Characterizations ◽  
Environmental Water ◽  
Solid Contact ◽  
Selective Electrode ◽  
Potentiometric Response ◽  
Metal Organic ◽  
Nernstian Slope ◽  
Organic Framework

A solid-contact ion-selective electrode was developed for detecting potassium in environmental water. Two versions of a stable cadmium acylhydrazone-based metal organic framework, i.e., JUK-13 and JUK-13_H2O, were used for the construction of the mediation layer. The potentiometric and electrochemical characterizations of the proposed electrodes were carried out. The implementation of the JUK-13_H2O interlayer is shown to improve the potentiometric response and stability of measured potential. The electrode exhibits a good Nernstian slope (56.30 mV/decade) in the concentration range from 10−5 to 10−1 mol L−1 with a detection limit of 2.1 µmol L−1. The long-term potential stability shows a small drift of 0.32 mV h−1 over 67 h. The electrode displays a good selectivity comparable to ion-selective electrodes with the same membrane. The K-JUK-13_H2O-ISE was successfully applied for the determination of potassium in three certified reference materials of environmental water with great precision (RSD < 3.00%) and accuracy (RE < 3.00%).

scholarly journals Potentiometric Carboxylate Sensors Based on Carbazole-Derived Acyclic and Macrocyclic Ionophores

Chemosensors ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 4
Author(s):  
Ville Yrjänä ◽  
Indrek Saar ◽  
Mihkel Ilisson ◽  
Sandip A. Kadam ◽  
Ivo Leito ◽  
...  
Keyword(s):  
Detection Limit ◽  
Vinyl Chloride ◽  
Anion Exchanger ◽  
Linear Range ◽  
Ph Sensitivity ◽  
Ion Selective Electrodes ◽  
Solid Contact ◽  
Response Characteristics ◽  
Potentiometric Response ◽  
Poly Vinyl Chloride

Solid-contact ion-selective electrodes with carbazole-derived ionophores were prepared. They were characterized as acetate sensors, but can be used to determine a number of carboxylates. The potentiometric response characteristics (slope, detection limit, selectivity, and pH sensitivity) of sensors prepared with different membrane compositions (ionophore, ionophore concentration, anion exchanger concentration, and plasticizer) were evaluated. The results show that for the macrocyclic ionophores, a larger cavity provided better selectivity. The sensors exhibited modest selectivity for acetate but good selectivity for benzoate. The carbazole-derived ionophores effectively decreased the interference from lipophilic anions, such as bromide, nitrate, iodide, and thiocyanate. The selectivity, detection limit, and linear range were improved by choosing a suitable plasticizer and by reducing the ionophore and anion exchanger concentrations. The influence of the electrode body’s material upon the composition of the plasticized poly(vinyl chloride) membrane, and thus also upon the sensor characteristics, was also studied. The choice of materials for the electrode body significantly affected the characteristics of the sensors.

scholarly journals Potentiometric Surfactant Sensor Based on 1,3-Dihexadecyl-1H-benzo[d]imidazol-3-ium for Anionic Surfactants in Detergents and Household Care Products

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3627
Author(s):  
Nikola Sakač ◽  
Dubravka Madunić-Čačić ◽  
Dean Marković ◽  
Lucija Hok ◽  
Robert Vianello ◽  
...  
Keyword(s):  
Anionic Surfactants ◽  
Negative Impact ◽  
Ion Pair ◽  
Two Phase ◽  
Potentiometric Response ◽  
Titration Curves ◽  
Signal Change ◽  
Nernstian Slope ◽  
Good Agreement

A 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-tetraphenylborate (DHBI-TPB) ion-pair implemented in DHBI-TPB surfactant sensor was used for the potentiometric quantification of anionic surfactants in detergents and commercial household care products. The DHBI-TPB ion-pair was characterized by FTIR spectroscopy and computational analysis which revealed a crucial contribution of the C–H∙∙∙π contacts for the optimal complex formation. The DHBI-TPB sensor potentiometric response showed excellent analytical properties and Nernstian slope for SDS (60.1 mV/decade) with LOD 3.2 × 10−7 M; and DBS (58.4 mV/decade) with LOD 6.1 × 10−7 M was obtained. The sensor possesses exceptional resistance to different organic and inorganic interferences in broad pH (2–10) range. DMIC used as a titrant demonstrated superior analytical performances for potentiometric titrations of SDS, compared to other tested cationic surfactants (DMIC > CTAB > CPC > Hyamine 1622). The combination of DHBI-TPB sensor and DMIC was successfully employed to perform titrations of the highly soluble alkane sulfonate homologues. Nonionic surfactants (increased concentration and number of EO groups) had a negative impact on anionic surfactant titration curves and a signal change. The DHBI-TPB sensor was effectively employed for the determination of technical grade anionic surfactants presenting the recoveries from 99.5 to 101.3%. The sensor was applied on twelve powered samples as well as liquid-gel and handwashing home care detergents containing anionic surfactants. The obtained results showed good agreement compared to the outcomes measured by ISE surfactant sensor and a two-phase titration method. The developed DHBI-TPB surfactant sensor could be used for quality control in industry and has great potential in environmental monitoring.

scholarly journals A new approach to high-capacity annotation watermarking based on digital fountain codes

2012 ◽  
Vol 68 (1) ◽  
pp. 59-77 ◽  
Author(s):  
Paweł Korus ◽  
Jarosław Białas ◽  
Andrzej Dziech
Keyword(s):  
High Capacity ◽  
Fountain Codes ◽  
New Approach ◽  
Digital Fountain Codes

scholarly journals Construction of Tb3+ PVC-MembraneElectrode Based on N,N’-Bis(pyrrolylmethylene)-2-aminobenzylamine

2011 ◽  
Vol 8 (s1) ◽  
pp. S203-S210 ◽  
Author(s):  
Hassan Ali Zamani ◽  
Zynab Rafati ◽  
Soraia Meghdadi
Keyword(s):  
Heavy Metal Ions ◽  
Alkaline Earth ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Fluoride Ion ◽  
Solution Ph ◽  
Potentiometric Response ◽  
Nernstian Slope ◽  
Mouth Wash

In this work, we report as new Tb3+-PVC membrane sensor based onN,N’-bis(pyrrolylmethylene)- 2-aminobenzylamine (PMA) as a suitable ion carrier. Poly vinylchloride (PVC)-based membrane composed of PMA with oleic acid (OA) as anionic additives and acetophenone (AP) as plasticizing solvent mediators. The Tb3+sensor exhibits a Nernstian slope of 19.7±0.4 mV per decade over the concentration range of 1.0×10-5to 1.0×10-2M and a detection limit of 4.6×10-6M of Tb3+ions. The potentiometric response of the sensor is independent of the solution pH in the range of 2.9–8.1. It has a very short response time, in the whole concentration range (∼5 s). The recommended sensor revealed comparatively good selectivity with respect to most alkali, alkaline earth, some transition and heavy metal ions. It was successfully employed as an indicator electrode in the potentiometric titration of Tb(III) ions with EDTA. The electrode was also employed for the determination of the fluoride ion in two mouth wash preparations and the determination of Tb3+ions concentration in mixtures of three different ions.

scholarly journals Comparison of Different Commercial Conducting Materials as Ion-to-Electron Transducer Layers in Low-Cost Selective Solid-Contact Electrodes

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1348
Author(s):  
C. Ocaña ◽  
M. Muñoz-Correas ◽  
N. Abramova ◽  
A. Bratov
Keyword(s):  
Good Accuracy ◽  
Low Cost ◽  
Pollution Monitoring ◽  
Ion Selective Electrodes ◽  
Comparison Study ◽  
Food Control ◽  
Solid Contact ◽  
Conducting Materials ◽  
Commercial Applications ◽  
Contact Electrodes

Simple, robust, sensitive and low-cost all-solid-state ion-selective electrodes (SCISEs) are of interest in different fields, such as medicine, veterinary, water treatment, food control, environmental and pollution monitoring, security, etc. as a replacement for traditional ion-selective electrodes with liquid inner contact. In spite of their potential advantages, SCISEs remain mainly in the research laboratories. With the motivation of developing simple and low-cost SCISEs with possible commercial applications, we report a comparison study of six different commercial conducting materials, namely, polypyrrole-block-polycaprolactone (PPy-b-PCaprol), graphene/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) ink, poly(3,4-ethylenedioxythiophene):polyethylenglycol (PEDOT:PEG), high conductivity PEDOT:PSS, polyethylenimine (PEI) with PEDOT:PSS for their possible use as ion-to-electron transducer in polyurethane based pH-SCISEs. Among all studied pH-SCISES, PEDOT:PEG based electrodes exhibited the best results in terms of sensitivity, reproducibility and lifetime. Finally, these sensors were tested in different real samples showing good accuracy.

scholarly journals Beryllium-Ion-Selective PEDOT Solid Contact Electrode Based on 9,10-Dinitrobenzo-9-Crown-3-Ether

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6375
Author(s):  
Junghwan Kim ◽  
Dae Hee Kim ◽  
Jin Cheol Yang ◽  
Jae Sang Kim ◽  
Ji Ha Lee ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Constant Current ◽  
Solid Contact ◽  
Response Characteristics ◽  
Best Response ◽  
Wide Ph Range ◽  
Selective Membrane ◽  
Nernstian Slope ◽  
Ph Range ◽  
Contact Electrode

A beryllium(II)-ion-selective poly(ethylenedioxythiophene) (PEDOT) solid contact electrode comprising 9,10-dinitrobenzo-9-crown-3-ether was successfully developed. The all-solid-state contact electrode, with an oxygen-containing cation-sensing membrane combined with an electropolymerized PEDOT layer, exhibited the best response characteristics. The performance of the constructed electrode was evaluated and optimized using potentiometry, conductance measurements, constant-current chronopotentiometry, and electrochemical impedance spectroscopy (EIS). Under optimized conditions, which were found for an ion-selective membrane (ISM) composition of 3% ionophore, 30% polyvinylchloride (PVC), 64% o-nitro phenyl octyl ether (o-NPOE), and 3% sodium tetraphenylborate (NaTPB), the fabricated electrode exhibited a good performance over a wide concentration range (10−2.5–10−7.0 M) and a wide pH range of 2.0–9.0, with a Nernstian slope of 29.5 mV/D for the beryllium (II) ion and a detection limit as low as 10−7.0 M. The developed electrode shows good selectivity for the beryllium(II) ion over alkali, alkaline earth, transition, and heavy metal ions.

scholarly journals Neodymium(III) PVC Membrane Electrodchemical Sensor Based on N-benzoylethylidene-2-aminobenzylamine

2012 ◽  
Vol 9 (4) ◽  
pp. 1941-1950 ◽  
Author(s):  
Hassan Ali Zamani ◽  
Mojdeh Zaferoni ◽  
Soraia Meghdadi
Keyword(s):  
Alkaline Earth ◽  
High Selectivity ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Solution Ph ◽  
Response Characteristics ◽  
Potentiometric Response ◽  
Nernstian Slope ◽  
Mouth Wash

The N-benzoylethylidene-2-aminobenzylamine (BEA) was used as a suitable ionophore in construction of neodymium ion selective electrode. The electrode with composition of 30% PVC, 58% solvent mediator (NB), 2% ionophore (BEA) and 10% anionic additive (OA) shows the best potentiometric response characteristics. The Nd3+sensor exhibits a Nernstian slope of 21.2 ± 0.2 mV decade-1over the concentration range of 1.0 × 10-6to 1.0 × 10-2mol L-1, and a detection limit of 6.3 × 10-7mol L-1of Nd3+ions. The potentiometric response of the sensor is independent of the solution pH in the range of 2.4–8.5. It has a very short response time, in the whole concentration range (~7 s), and can be used for at least eight weeks. The proposed sensor revealed high selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions, including members of the lanthanide family other than Nd3+. The Nd3+sensor was successfully applied as an indicator electrode in the potentiometric titration of Nd3+ions with EDTA. The electrode was also employed for the determination of the fluoride ion in two mouth wash preparations.

Sign in / Sign up

Export Citation Format

Share Document