The role of pore pressure during hydraulic fracturing and implications for groundwater outbursts in mining and tunnelling

2011 ◽  
Vol 19 (5) ◽  
pp. 995-1008 ◽  
Author(s):  
Tianhong Yang ◽  
Wancheng Zhu ◽  
Qinglei Yu ◽  
Honglei Liu
Keyword(s):  
Hydraulic Fracturing ◽  
Pore Pressure

The role of preexisting fractures and faults during multistage hydraulic fracturing in the Bakken Formation

2014 ◽  
Vol 2 (3) ◽  
pp. SG25-SG39 ◽  
Author(s):  
Yi Yang ◽  
Mark D. Zoback
Keyword(s):  
Hydraulic Fracturing ◽  
Pore Pressure ◽  
Well Being ◽  
Williston Basin ◽  
Bakken Formation ◽  
Multistage Hydraulic Fracturing ◽  
Geomechanical Analysis ◽  
Microseismic Events ◽  
Observation Wells

We performed an integrated study of multistage hydraulic fracture stimulation of two parallel horizontal wells in the Bakken Formation in the Williston Basin, North Dakota. There are three distinct parts of this study: development of a geomechanical model for the study area, interpretation of multiarray downhole recordings of microseismic events, and interpretation of hydraulic fracturing data in a geomechanical context. We estimated the current stress state to be characterized by an NF/SS regime, with [Formula: see text] oriented approximately [Formula: see text]. The microseismic events were recorded in six vertical observation wells during hydraulic fracturing of parallel wells X and Z with three unusual aspects. First, rather than occurring in proximity to the stages being pressurized, many of the events occurred along the length of well Y, a parallel well located between wells X and Z that had been in production for approximately [Formula: see text] years at the time X and Z were stimulated. Second, relatively few fracturing stages were associated with an elongated cloud of events trending in the direction of [Formula: see text] as was commonly observed during hydraulic fracturing. Instead, the microseismic events in a few stages appeared to trend approximately [Formula: see text], approximately 30° from the direction of [Formula: see text]. Earthquake focal plane mechanisms confirmed slip on faults with this orientation. Finally, the microseismic events were clustered at two distinct depths: one near the depth of the well being pressurized in the Middle Bakken Formation and the other approximately [Formula: see text] above in the Mission Canyon Formation. We proposed that steeply dipping N75°E striking faults with a combination of normal and strike-slip movement were being stimulated during hydraulic fracturing and provided conduits for pore pressure to be transmitted to the overlaying formations. We tested a simple geomechanical analysis to illustrate how this occurred in the context of the stress field, pore pressure, and depletion in the vicinity of well Y.

Landslide Stability: Role of Rainfall-Induced, Laterally Propagating, Pore-Pressure Waves

2011 ◽  
Vol 17 (4) ◽  
pp. 315-335 ◽  
Author(s):  
G. R. PRIEST ◽  
W. H. SCHULZ ◽  
W. L. ELLIS ◽  
J. A. ALLAN ◽  
A. R. NIEM ◽  
...  
Keyword(s):  
Pore Pressure ◽  
Pressure Waves ◽  
Landslide Stability

Joint Application of Diagenetic, Petrophysical and Geomechanical Data for Selecting Hydraulic Fracturing Candidate Zone

2021 ◽  
Vol 8 ◽  
pp. 55-79
Author(s):  
E. Bakhshi ◽  
A. Shahrabadi ◽  
N. Golsanami ◽  
Sh. Seyedsajadi ◽  
X. Liu ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Pore Pressure ◽  
Earth Model ◽  
Reservoir Properties ◽  
Stress Regime ◽  
Geomechanical Properties ◽  
Hydrocarbon Reservoir ◽  
Diagenetic Processes ◽  
Mechanical Earth Model ◽  
New Equation

The more comprehensive information on the reservoir properties will help to better plan drilling and design production. Herein, diagenetic processes and geomechanical properties are notable parameters that determine reservoir quality. Recognizing the geomechanical properties of the reservoir as well as building a mechanical earth model play a strong role in the hydrocarbon reservoir life cycle and are key factors in analyzing wellbore instability, drilling operation optimization, and hydraulic fracturing designing operation. Therefore, the present study focuses on selecting the candidate zone for hydraulic fracturing through a novel approach that simultaneously considers the diagenetic, petrophysical, and geomechanical properties. The diagenetic processes were analyzed to determine the porosity types in the reservoir. After that, based on the laboratory test results for estimating reservoir petrophysical parameters, the zones with suitable reservoir properties were selected. Moreover, based on the reservoir geomechanical parameters and the constructed mechanical earth model, the best zones were selected for hydraulic fracturing operation in one of the Iranian fractured carbonate reservoirs. Finally, a new empirical equation for estimating pore pressure in nine zones of the studied well was developed. This equation provides a more precise estimation of stress profiles and thus leads to more accurate decision-making for candidate zone selection. Based on the results, vuggy porosity was the best porosity type, and zones C2, E2 and G2, having suitable values of porosity, permeability, and water saturation, showed good reservoir properties. Therefore, zone E2 and G2 were chosen as the candidate for hydraulic fracturing simulation based on their E (Young’s modulus) and ν (Poisson’s ratio) values. Based on the mechanical earth model and changes in the acoustic data versus depth, a new equation is introduced for calculating the pore pressure in the studied reservoir. According to the new equation, the dominant stress regime in the whole well, especially in the candidate zones, is SigHmax>SigV>Sighmin, while according to the pore pressure equation presented in the literature, the dominant stress regime in the studied well turns out to be SigHmax>Sighmin>SigV.  

scholarly journals A new slick water system for hydraulic fracturing in tight reservoir to enhance imbibition oil recovery

2021 ◽  
Vol 303 ◽  
pp. 01001
Author(s):  
Yu Haiyang ◽  
Ji Wenjuan ◽  
Luo Cheng ◽  
Lu Junkai ◽  
Yan Fei ◽  
...  
Keyword(s):  
Contact Angle ◽  
Interfacial Tension ◽  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Water System ◽  
Natural Fracture ◽  
Fracturing Fluid ◽  
The Core ◽  
Ultralow Permeability

In order to give full play to the role of imbibition of capillary force and enhance oil recovery of ultralow permeability sandstone reservoir after hydraulic fracturing, the mixed water fracture technology based on functional slick water is described and successfully applied to several wells in oilfield. The core of the technology is determination of influence factors of imbibition oil recovery, the development of new functional slick water system and optimization of volume fracturing parameters. The imbibition results show that it is significant effect of interfacial tension, wetting on imbibition oil recovery. The interfacial tension decreases by an order of magnitude, the imbibition oil recovery reduces by more than 10%. The imbibition oil recovery increases with the contact angle decreasing. The emulsifying ability has no obvious effect on imbibition oil recovery. The functional slick water system considering imbibition is developed based on the solution rheology and polymer chemistry. The system has introduced the active group and temperature resistant group into the polymer molecules. The molecular weight is controlled in 1.5 million. The viscosity is greater than 2mPa·s after shearing 2h under 170s-1 and 100℃. The interfacial tension could decrease to 10-2mN/m. The contact angle decreased from 58° to 22° and the core damage rate is less than 12%. The imbibition oil recovery could reach to 43%. The fracturing process includes slick water stage and linear gel stage. 10% 100 mesh ceramists and 8% temporary plugging agents are carried into the formation by functional slick water. 40-70 mesh ceramists are carried by linear gel. The liquid volume ratio is about 4:1 and the displacement is controlled at 10-12m3/min. The sand content and fracturing fluid volumes of single stage are 80m3 and 2500 m3 respectively. Compared with conventional fracturing, due to imbibition oil recovery, there is only 25% of the fracturing fluid flowback rate when the crude oil flew out. When the oil well is in normal production, about 50% of the fracturing fluid is not returned. It is useful to maintain the formation energy and slow down the production decline. The average cumulative production of vertical wells is greater than 2800t, and the effective period is more than 2 years. This technology overcoming the problem of high horizontal stress difference and lack of natural fracture has been successfully applied in Jidong Oilfield ultralow permeability reservoir. The successful application of this technology not only helps to promote the effective use of ultralow permeability reservoirs, but also helps to further clarify the role of imbibition recovery, energy storage and oil-water replacement mechanism.

Porosity trends in the Skagerrak Formation, Central Graben, United Kingdom Continental Shelf: The role of compaction and pore pressure history

AAPG Bulletin ◽  
2014 ◽  
Vol 98 (6) ◽  
pp. 1111-1143 ◽  
Author(s):  
Neil T. Grant ◽  
Alexander J. Middleton ◽  
Stuart Archer
Keyword(s):  
United Kingdom ◽  
Continental Shelf ◽  
Pore Pressure ◽  
Pressure History

scholarly journals The Role of Fault‐Zone Architectural Elements on Pore Pressure Propagation and Induced Seismicity

Ground Water ◽  
2018 ◽  
Vol 57 (3) ◽  
pp. 465-478 ◽  
Author(s):  
John P. Ortiz ◽  
Mark A. Person ◽  
Peter S. Mozley ◽  
James P. Evans ◽  
Susan L. Bilek
Keyword(s):  
Pore Pressure ◽  
Fault Zone ◽  
Induced Seismicity ◽  
Architectural Elements ◽  
Pressure Propagation

Comprehensive Characterization and Mitigation of Hydraulic Fracturing-Induced Seismicity in Fox Creek, Alberta

SPE Journal ◽  
2021 ◽  
pp. 1-12
Author(s):  
Gang Hui ◽  
Shengnan Chen ◽  
Zhangxin Chen ◽  
Fei Gu ◽  
Mathab Ghoroori ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Hydraulic Fracturing ◽  
Pore Pressure ◽  
Hydraulic Fracture ◽  
Induced Seismicity ◽  
Mitigation Strategy ◽  
Moment Magnitude ◽  
Induced Earthquakes ◽  
Data Set ◽  
Comprehensive Characterization

Summary The relationships among formation properties, fracturing operations, and induced earthquakes nucleated at distinctive moments and positions remain unclear. In this study, a complete data set on formations, seismicity, and fracturing treatments is collected in Fox Creek, Alberta, Canada. The data set is then used to characterize the induced seismicity and evaluate its susceptibility toward fracturing stimulations via integration of geology, geomechanics, and hydrology. Five mechanisms are identified to account for spatiotemporal activation of the nearby faults in Fox Creek, where all major events [with a moment magnitude (Mw) greater than 2.5] are caused by the increase in pore pressure and poroelastic stress during the fracturing operation. In addition, an integrated geological index (IGI) and a combined geomechanical index (CGI) are first proposed to indicate seismicity susceptibility, which is consistent with the spatial distribution of induced earthquakes. Finally, mitigation strategy results suggest that enlarging a hydraulic fracture-fault distance and decreasing a fracturing job size can reduce the risk of potential seismic activities.

Sign in / Sign up

Export Citation Format

Share Document