scholarly journals Inscriptions and Images in Secular Buildings: Examples from Renaissance Scania, Sweden, ca. 1450–1658

2021 ◽  
Author(s):  
Martin Hansson
Keyword(s):  
Urban Elite ◽  
Timber Beams

AbstractThis paper examines how agents inscribed their persona in buildings during the Renaissance in Scania in present-day Sweden. Through an analysis of stone tablets and timber beams with inscriptions, images, and dates, questions of identity and individuality are highlighted. The objects were often placed above doors in noble country residences or in buildings belonging to the urban elite. The paper discusses who was able to see and understand the messages communicated by the buildings, and when, how, and why the tradition of putting up this type of object on buildings emerged in a Scandinavian context.

How Roman Are Roman Houses in the Eastern Mediterranean? The House of Leukaktios (Ptolemais, Cyrenaica) and the House of Orpheus (Nea Paphos, Cyprus) as Case Studies

2020 ◽  
pp. 107-121
Author(s):  
Monika Rekowska
Keyword(s):  
Cultural Heritage ◽  
Case Studies ◽  
Eastern Mediterranean ◽  
Residential Units ◽  
Urban Elite

Cyprus and Cyrenaica, two regions strongly influenced by the Alexandrian cultural heritage, which came under the Roman rule already in the 1st century BC, are simultaneously both typical and unusual examples of acculturation understood as a mixture of Hellenistic and Roman components. This is reflected in various spheres of life, including the architecture of the houses owned by members of the urban elite which are investigated in this article. Two residential units – the House of Leukaktios at Ptolemais in Cyrenaica and the House of Orpheus at Nea Paphos in Cyprus – will be presented to discuss different attitudes towards Romanisation from the perspective of an individual as reflected by particular dwellings.

Saving the Nation

2020 ◽  
Author(s):  
Thomas H. Reilly
Keyword(s):  
Twentieth Century ◽  
Social Reform ◽  
Social Role ◽  
Urban Life ◽  
Chinese Society ◽  
Social Revolution ◽  
Social Christianity ◽  
History Of ◽  
Urban Elite ◽  
Justice And Mercy

This book is a history of the Chinese Protestant elite and their contribution to building a new China in the years from 1922 to 1952. While a small percentage of China’s overall population, China’s Protestants constituted a large and influential segment of the urban elite. They exercised that influence through their churches, hospitals, and schools, especially the universities, and also through institutions such as the YMCA and the YWCA, whose membership was drawn from the modern sectors of urban life. These Protestant elites believed that they could best contribute to the building of a new China through their message of social Christianity, believing that Christianity could help make Chinese society strong, modern, and prosperous, but also characterized by justice and mercy. More than preaching a message, the Protestant elite also played a critical social role, through their institutions, broadening the appeal and impact of social movements, and imparting to them a greater sense of legitimacy. This history begins with the elite’s participation in social reform campaigns in the early twentieth century, continues with their efforts in resisting imperialism, and ends with their support for the Communist-led social revolution.

scholarly journals Computational and experimental analysis of timber beams with different types of flaws

2020 ◽  
Author(s):  
J. Kováčiková ◽  
O. Ivánková ◽  
S. Berg ◽  
M. Ekevad ◽  
T. Klas
Keyword(s):  
Experimental Analysis ◽  
Different Types ◽  
Timber Beams

Study on the strength of glued laminated timber beams with round holes: difference in structural performance between homogeneous-grade and heterogeneous-grade timber

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Shigefumi Okamoto ◽  
Nobuhiko Akiyama ◽  
Yasuhiro Araki ◽  
Kenji Aoki ◽  
Masahiro Inayama
Keyword(s):  
Scots Pine ◽  
Maximum Shear Stress ◽  
Material Strength ◽  
Laminated Beams ◽  
Strength Grade ◽  
Glued Laminated Timber ◽  
The Difference ◽  
Materials Used ◽  
Beam Height ◽  
Timber Beams

AbstractVarious design codes and design proposals have been proposed for glued laminated timber beams with round holes, assuming that the entire beam is composed of homogeneous-grade timber. However, in Japan, glued laminated timber composed of homogeneous-grade timber is rarely used for beams. In this study, the difference in the load-bearing capacity of glued laminated beams composed of homogeneous-grade timber and heterogeneous-grade timber with round holes when fractured by cracking was investigated experimentally and analytically. The materials used in the tests were glued laminated beams composed of homogeneous-grade Scots pine timber with a strength grade of E105-F345 and heterogeneous-grade Scots pine timber with a strength grade of E105-F300. Experiments confirmed that although the glued laminated beams composed of heterogeneous-grade timber have a lower material strength in the lamina with holes, its resistance to fracturing due to cracks associated with the holes is almost the same as that of the glued laminated beams composed of homogeneous-grade timber. The stresses acting on the holes in the laminated timber with holes of less than half the beam height were lower in the glued laminated beams composed of heterogeneous-grade timber than in the glued laminated beams composed of homogeneous-grade timber. The ratio of the stresses was found to be approximately equal to the ratio of the maximum bending stress or the maximum shear stress acting on the inner layer lamina, as determined by Bernoulli–Euler theory.

scholarly journals Near-Surface Mounted Reinforcement of Sawn Timber Beams-FEM Approach

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2780
Author(s):  
Izabela Burawska-Kupniewska ◽  
Piotr Beer
Keyword(s):  
European Standard ◽  
Near Surface ◽  
Bending Tests ◽  
Starting Point ◽  
Structural Applications ◽  
Bending Stresses ◽  
Complex Models ◽  
Near Surface Mounted ◽  
Sawn Timber ◽  
Timber Beams

The demand for timber has increased significantly in recent years. Therefore, reliable tools are needed to predict the mechanical properties of sawn timber, especially for structural applications. Very complex models require a lot of input data for analysis, which cannot always be guaranteed, especially in industrial practice. Thus, a simplified model for material description was developed and assessed with experiments (static bending tests carried out in accordance with the guidelines suggested in the European standard EN 408) and an analytical approach (gamma method according to the guidelines given in the European standard EN 1995). The effective stiffness was calculated as a major parameter, which has an influence on the elements’ behavior. The model included a near-surface mounted (NSM) local reinforcement technique, with CFRP strips of Scots pine timber beams being subjected to bending stresses. It is anticipated that the developed model can be a starting point for the repair engineering field, contributing to decision-making regarding conservation technique selection and range. Next, improvements of the model will provide more and more realistic results for numerical analysis in terms of the obtained failure mechanisms for sawn timber elements.

Economic decline and the urban elite in eighteenth-century Dutch towns: a review essay

Urban History ◽  
1989 ◽  
Vol 16 ◽  
pp. 78-81 ◽  
Author(s):  
Herman Diederiks
Keyword(s):  
Eighteenth Century ◽  
Seventeenth Century ◽  
Urban Life ◽  
Economic Decline ◽  
Urban Hierarchy ◽  
Leading Position ◽  
Urban Elite ◽  
The Republic ◽  
Clay Pipe ◽  
Dramatic Fall

Dutch urban history has finally accorded the eighteenth century the attention it deserves in a number of recent publications. That century was characterized by the economic and political decline of the Dutch Republic generally, and certain towns in particular. The ‘Zuiderzee’ towns witnessed a dramatic fall in population, reflecting their economic decline, and in the southern part of the province of Holland urban life also stagnated. In contrast to the ports, inland towns derived status in the urban hierarchy from their industrial interests, but due to foreign competition in the eighteenth century, they too declined; most notably, the cloth industry of Leiden, the clay pipe industry of Gouda, and the breweries and potteries of Delft each lost the leading position established in the seventeenth century. Leiden was the largest of the towns with more than 70,000 inhabitants in the last quarter of the seventeenth century, and after Amsterdam, was the most populous town of the Republic. Leiden however could not maintain that position, and lost almost 50 per cent of its inhabitants during the first half of the eighteenth century, declining further to under 30,000 residents by 1800. Gouda numbered about 20,000 in 1732, but declined to 12,000 in 1795; Hoorn with 12,000 inhabitants diminished to only 9,500 in 1795 and the population of Delft, too, fell from around 24,000 in 1680 to 14,000 in 1795.

Old and New Nobility in Aix-en-Provence, 1600-1695: Portrait of an Urban Elite.

1993 ◽  
Vol 98 (4) ◽  
pp. 1261
Author(s):  
George Huppert ◽  
Donna Bohanan
Keyword(s):  
Urban Elite
Sign in / Sign up

Export Citation Format

Share Document