Optimization of the pulsed laser deposition process of In2O3 thin films for ferroelectric field effect device applications

2021 ◽  
Author(s):  
Meng Xu ◽  
Lei Guo ◽  
Jian-Min Yan ◽  
Zhi-Xue Xu ◽  
Hui Wang ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Field Effect ◽  
Pulsed Laser ◽  
Deposition Process ◽  
Laser Deposition ◽  
Device Applications

Effects of Single-Crystalline GaN Target on GaN Thin Films in Pulsed Laser Deposition Process

2005 ◽  
Vol 44 (11) ◽  
pp. 7896-7900 ◽  
Author(s):  
Takahiro Nagata ◽  
Young-Zo Yoo ◽  
Parhat Ahmet ◽  
Toyohiro Chikyow
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Deposition Process ◽  
Laser Deposition ◽  
Single Crystalline

Epitaxial Growth of Ferroelectric Thin Films on GaAs with MgO Buffer Layers by Pulsed Laser Deposition

1991 ◽  
Vol 243 ◽  
Author(s):  
K. Nashimoto ◽  
D. K. Fork ◽  
F. A. Ponce ◽  
T. H. Geballe
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Epitaxial Growth ◽  
Pulsed Laser ◽  
Ferroelectric Thin Films ◽  
Buffer Layers ◽  
Laser Deposition ◽  
Hrtem Observation ◽  
Device Applications ◽  
Ferroelectric Hysteresis

AbstractEpitaxial growth of ferroelectric thin films on GaAs (100) by pulsed laser deposition was examined for integrated electro-optic device applications. To promote epitaxy of ferroelectrics and prevent interdiffusion, we have deposited several types of buffer layers. CeO2 reacted strongly with GaAs. Although Y203 9% stabilized-ZrO2 films showed epitaxial growth, YSZ reacted with GaAs at 780°C. MgO grew epitaxially and was stable even at 780°C. HRTEM observation showed a sharp interface between MgO and GaAs. BaTiO3 and SrTiO3 deposited on MgO/GaAs structures showed epitaxial growth. In-plane orientation was BaTiO3 [100 // MgO [100] // GaAs [100]. Epitaxial BaTiO3 films were c-axis oriented tetragonal phase and showed ferroelectric hysteresis.

Pulsed laser deposition process of PLZT thin films using an infrared Nd:YAG laser

2006 ◽  
Vol 252 (10) ◽  
pp. 3783-3788 ◽  
Author(s):  
T. García ◽  
E. de Posada ◽  
P. Bartolo-Pérez ◽  
J.L. Peña ◽  
R. Diamant ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Nd:Yag Laser ◽  
Pulsed Laser ◽  
Deposition Process ◽  
Laser Deposition ◽  
Plzt Thin Films

Cross-Sectional Nanoindentation of Alumina Thin Films Deposited by Pulsed Laser Deposition Process

2006 ◽  
Author(s):  
Sudheer Neralla ◽  
Sergey Yarmolenko ◽  
Dhananjay Kumar ◽  
Devdas Pai ◽  
Jag Sankar
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
High Hardness ◽  
Deposition Process ◽  
Laser Deposition ◽  
Cross Sectional ◽  
Adhesion Properties ◽  
Force Microscopy ◽  
Atomic Force

Alumina is a widely used ceramic material due to its high hardness, wear resistance and dielectric properties. The study of phase transformation and its correlation to the mechanical properties of alumina is essential. In this study, interfacial adhesion properties of alumina thin films are studied using cross-sectional nanoindentation (CSN) technique. Alumina thin films are deposited at 200 and 700 °C, on Si (100) substrates with a weak Silica interface, using pulsed laser deposition (PLD) process. Effect of annealing on the surface morphology of the thin films is studied using atomic force microscopy. Xray diffraction studies revealed that alumina thin films are amorphous in nature at 200 °C and polycrystalline with predominant gamma alumina phase at 700 °C.

Preparation and electrical properties of CuInSe2 thin films by pulsed laser deposition using excess Se targets

2010 ◽  
Vol 25 (10) ◽  
pp. 1936-1942 ◽  
Author(s):  
Deuk Ho Yeon ◽  
Bhaskar Chandra Mohanty ◽  
Yeon Hwa Jo ◽  
Yong Soo Cho
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Pulsed Laser Deposition ◽  
Room Temperature ◽  
Surface Coverage ◽  
Hole Concentration ◽  
Pulsed Laser ◽  
Deposition Process ◽  
Laser Deposition ◽  
Average Size

An effective way to prepare a robust CuInSe2 (CIS) target for subsequent vapor depositions of thin films is suggested in this work. The technique involves addition of excess Se to presynthesized CIS powder followed by cold pressing and sintering at a temperature as low as 300 °C. Phase-pure chalcopyrite CIS films were prepared at a substrate temperature of 300 °C from targets that contained different amounts of excess Se. The average size of particulates, typical of the pulsed laser deposition process, and their surface coverage decreased with increasing Se content up to 50 wt% in the targets. Films grown from the target with 50 wt% excess Se exhibited a hole concentration of ˜3 × 1019 cm−3 and a Hall mobility of ˜2 cm2/Vs. With the decrease of substrate temperature to room temperature, the resistivity increased from 1.1 × 10−1 to ˜7.5 × 108 Ω·cm, which is attributed to the potential contributions of Se interstitials, CuIn, and VIn defects.

Gasdynamics and Chemistry in The Pulsed Laser Deposition of Oxide Dielectric Thin Films

1993 ◽  
Vol 334 ◽  
Author(s):  
John W. Hastie ◽  
David W. Bonnell ◽  
Albert J. Paul ◽  
Peter K. Schenck
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Recent Work ◽  
Pulsed Laser ◽  
Deposition Process ◽  
Laser Deposition ◽  
Research Groups ◽  
Dielectric Thin Films ◽  
Modeling Approaches

AbstractIn the context of “chemistry and its effects on film quality,” we and a number of other research groups have developed spectroscopic and modeling approaches to better define the pulsed laser deposition process. An overview of these approaches is given here, using the results of recent work performed in our laboratory on the oxide dielectric systems of BaTiO3 and PbZr0.53Ti0.47O3(PZT).

Sign in / Sign up

Export Citation Format

Share Document