The effect of the annealing temperature on the structure and electrical properties of Li/Ta-modified (K0.5Na0.5)NbO3-based piezoelectric crystals

Author(s):  
Huan Lu ◽  
Minhong Jiang ◽  
Xiaoyu Yao ◽  
Zhaowei Zhang ◽  
Wei Wang ◽  
...  
2013 ◽  
Vol 74 (12) ◽  
pp. 1672-1677 ◽  
Author(s):  
Y.J. Zhang ◽  
Z.T. Liu ◽  
D.Y. Zang ◽  
X.S. Che ◽  
L.P. Feng ◽  
...  

Author(s):  
I.H.H. Affendi ◽  
N. E. A. Azhar ◽  
M.S.P. Sarah ◽  
Salman A.H. Alrokayan ◽  
Haseeb A. Khan ◽  
...  

2018 ◽  
Vol 48 (2) ◽  
pp. 845-852 ◽  
Author(s):  
N. N. Wathore ◽  
Bhupender Rawal ◽  
Prashant Dixit ◽  
Snehal Mandave ◽  
B. Praveenkumar ◽  
...  

2001 ◽  
Vol 685 ◽  
Author(s):  
Won-Jae Lee ◽  
Chang-Ho Shin ◽  
In-Kyu You ◽  
Il-Suk Yang ◽  
Sang-Ouk Ryu ◽  
...  

AbstractThe SrTa2O6 (STO) thin films were prepared by plasma enhanced atomic layer deposition (PEALD) with alternating supply of reactant sources, Sr[Ta(C2H5O)5(C4H10NO)]2 {Strontium bis-[tantalum penta-ethoxide dimethyllaminoethoxide]; Sr(Ta(OEt)5▪dmae)2} and O2plasma. It was observed that the uniform and conformal STO thin films were successfully deposited using PEALD and the film thickness per cycle was saturated at about 0.8 nm at 300°C. Electrical properties of SrTa2O6 (STO) thin films prepared on Pt/SiO2/Si substrates with annealing temperatures have been investigated. While the grain size and dielectric constant of STO films increased with increasing annealing temperature, the leakage current characteristics of STO films slightly deteriorated. The leakage current density of a 40nm-STO film was about 5×10−8A/cm2 at 3V.


2007 ◽  
Vol 51 (1) ◽  
pp. 168 ◽  
Author(s):  
Dongwon Lee ◽  
Dongchan Suh ◽  
Dae-Hong Ko ◽  
Kyung Park ◽  
Myung Soo Lee ◽  
...  

2013 ◽  
Vol 854 ◽  
pp. 125-133 ◽  
Author(s):  
Larysa Khomenkova ◽  
Xavier Portier ◽  
Abdelilah Slaoui ◽  
Fabrice Gourbilleau

Hafnium silicate dielectric films were fabricated by radio frequency magnetron sputtering. Their microstructure and electrical properties were studied versus annealing treatment. The evolution of microstructure and the formation of alternated HfO2-rich and SiO2-rich layers were observed and explained by surface directed spinodal decomposition. The stable tetragonal HfO2 phase was formed upon an annealing at 1000-1100°C. The control of annealing temperature allowed the memory window to be achieved and to be tuned as well as the dielectric constant to be enhanced.


2011 ◽  
Vol 383-390 ◽  
pp. 822-825
Author(s):  
Ping Luan ◽  
Jian Sheng Xie ◽  
Jin Hua Li

Using magnetron sputtering technology, the CuInSi thin films were prepared by multilayer synthesized method. The structure of CuInSi films were detected by X-ray diffraction(XRD), the main crystal phase peak is at 2θ=42.458°; The resistivity of films were measured by SDY-4 four-probe meter; The conductive type of the films were tested by DLY-2 conductivity type testing instrument. The results show that the annealing temperature and time effect on the crystal resistivity and crystal structure greatly.


Sign in / Sign up

Export Citation Format

Share Document