Attainment and characterization of carboxymethyl chitosan hydrogels by enzymatic cross-linking

2019 ◽  
Vol 138 (5) ◽  
pp. 3635-3643
Author(s):  
Andreia de Araújo Morandim-Giannetti ◽  
Patrick de Oliveira Wecchi ◽  
Paula de Araújo Silvério ◽  
Regina Carlstron ◽  
Patrícia Alessandra Bersanetti
Keyword(s):  
Carboxymethyl Chitosan ◽  
Cross Linking ◽  
Chitosan Hydrogels

scholarly journals Construction of Cellulose/Carboxymethyl Chitosan Hydrogels for Potential Wound Dressing Application

2021 ◽  
Author(s):  
Yi Guo ◽  
Chuanyin Zhao ◽  
Chao Yan ◽  
Li Cui
Keyword(s):  
Wound Dressing ◽  
Thermo Gravimetric Analysis ◽  
Pore Wall ◽  
Carboxymethyl Chitosan ◽  
Cross Linking ◽  
Cellulose Content ◽  
Gravimetric Analysis ◽  
Composite Hydrogels ◽  
Equilibrium Swelling Ratio ◽  
Chitosan Hydrogels

Abstract In this study, novel cellulose/carboxymethyl chitosan (CMCS) composite hydrogels were constructed by blending cellulose and CMCS in LiOH/urea aqueous solutions, and then cross-linking with epichlorohydrin. The structure and morphology of the composite hydrogels were characterized by Fourier transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction (WXRD), thermo-gravimetric analysis (TGA), and scanning electron microscopy (SEM). The results revealed that the chemical cross-linking reaction between cellulose and CMCS occurred in the hydrogel, and CMCS contributed to the enhancement of pore size, whereas cellulose as a strong backbone in the hydrogel to support the pore wall. The mechanical strength of the composite hydrogels increased with the cellulose content, while the equilibrium swelling ratio and antibacterial activity increased with the CMCS content. The composite hydrogels had no cytotoxicity towards L929 cells, suggesting good biocompatibility. All these results indicate that cellulose/CMCS composite hydrogels can be effectively used as a material in wound dressing.

Biopolymers with Medical Applications Optimized method for obtaining chitosan-based delivery systems

2018 ◽  
Vol 69 (7) ◽  
pp. 1756-1759 ◽  
Author(s):  
Luminita Confederat ◽  
Iuliana Motrescu ◽  
Sandra Constantin ◽  
Florentina Lupascu ◽  
Lenuta Profire
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Average Diameter ◽  
Delivery Systems ◽  
Cross Linking ◽  
Low Molecular Weight ◽  
Polymeric Systems ◽  
Chitosan Microparticles ◽  
Degree Of Swelling

The aim of this study was to optimize the method used for obtaining microparticles based on chitosan � a biocompatible, biodegradable, and nontoxic polymer, and to characterize the developed systems. Chitosan microparticles, as drug delivery systems were obtained by inotropic gelation method using pentasodiumtripolyphosphate (TPP) as cross-linking agent. Chitosan with low molecular weight (CSLMW) in concentration which ranged between 0.5 and 5 %, was used while the concentration of cross-linking agent ranged between 1 and 5%. The characterization of the microparticles in terms of shape, uniformity and adhesion was performed in solution and dried state. The size of the microparticles and the degree of swelling were also determined. The structure and the morphology of the developed polymeric systems were analyzed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM).The average diameter of the chitosan microparticles was around 522 �m. The most stable microparticles were obtained using CSLMW 1% and TPP 2% or CSLMW 0.75%and TPP 1%. The micropaticles were spherical, uniform and without flattening. Using CSLMW in concentration of 0.5 % poorly cross-linked and crushed microparticles have been obtained at all TPP concentrations. By optimization of the method, stable chitosan-based micropaticles were obtained which will be used to develop controlled release systems for drug delivery.

scholarly journals Toward Physicochemical and Rheological Characterization of Different Injectable Hyaluronic Acid Dermal Fillers Cross-Linked with Polyethylene Glycol Diglycidyl Ether

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 948
Author(s):  
Nicola Zerbinati ◽  
Sabrina Sommatis ◽  
Cristina Maccario ◽  
Maria Chiara Capillo ◽  
Giulia Grimaldi ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Polyethylene Glycol ◽  
Biological Activities ◽  
Diglycidyl Ether ◽  
Dermal Filler ◽  
Cross Linking ◽  
Matrix Structure ◽  
Dermal Fillers ◽  
Rheological Characterization

(1) Background: Injectable hyaluronic acid (HA) dermal fillers are used to restore volume, hydration and skin tone in aesthetic medicine. HA fillers differ from each other due to their cross-linking technologies, with the aim to increase mechanical and biological activities. One of the most recent and promising cross-linkers is polyethylene glycol diglycidyl ether (PEGDE), used by the company Matex Lab S.p.A., (Brindisi, Italy) to create the HA dermal filler PEGDE family. Over the last few years, several studies have been performed to investigate the biocompatibility and biodegradability of these formulations, but little information is available regarding their matrix structure, rheological and physicochemical properties related to their cross-linking technologies, the HA content or the degree of cross-linking. (2) Methods: Seven different injectable HA hydrogels were subjected to optical microscopic examination, cohesivity evaluation and rheological characterization in order to investigate their behavior. (3) Results: The analyzed cross-linked dermal fillers showed a fibrous “spiderweb-like” matrix structure, with each medical device presenting different and peculiar rheological features. Except for HA non cross-linked hydrogel 18 mg/mL, all showed an elastic and cohesive profile. (4) Conclusions: The comparative analysis with other literature works makes a preliminary characterization of these injectable medical devices possible.

scholarly journals Characterization of swelling behavior of carbon nano-filler modified polydimethylsiloxane composites

2021 ◽  
pp. 009524432110061
Author(s):  
Bo Yang ◽  
Balakrishnan Nagarajan ◽  
Pierre Mertiny
Keyword(s):  
Digital Image Analysis ◽  
Swelling Behavior ◽  
Optical Measurements ◽  
Natural Phenomenon ◽  
Cross Linking ◽  
Dimensional Changes ◽  
Experimental Findings ◽  
Carbon Based

Polymers may absorb fluids from their surroundings via the natural phenomenon of swelling. Dimensional changes due to swelling can affect the function of polymer components, such as in the case of seals, microfluidic components and electromechanical sensors. An understanding of the swelling behavior of polymers and means for controlling it can improve the design of polymer components, for example, for the previously mentioned applications. Carbon-based fillers have risen in popularity to be used for the property enhancement of resulting polymer composites. The present investigation focuses on the effects of three carbon-based nano-fillers (graphene nano-platelets, carbon black, and graphene nano-scrolls) on the dimensional changes of polydimethylsiloxane composites due to swelling when immersed in certain organic solvents. For this study, a facile and expedient methodology comprised of optical measurements in conjunction with digital image analysis was developed as the primary experimental technique to quantify swelling dimensional changes of the prepared composites. Other experimental techniques assessed polymer cross-linking densities and elastic mechanical properties of the various materials. The study revealed that the addition of certain carbon-based nano-fillers increased the overall swelling of the composites. The extent of swelling further depended on the organic solvent in which the composites were immersed in. Experimental findings are contrasted with published models for swelling prediction, and the role of filler morphology on swelling behavior is discussed.

scholarly journals Fabrication and characterization of hexadecyl acrylate cross-linked phase change microspheres

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 69-75
Author(s):  
Haoran Yun ◽  
Xingxiang Zhang
Keyword(s):  
Phase Change ◽  
Smooth Surface ◽  
Bone Conduction ◽  
Cross Linking ◽  
Gravimetric Analysis ◽  
Orthopedic Implant ◽  
Thermal Gravimetric ◽  
Fabrication And Characterization ◽  
Fast Release

AbstractMicrospheres with phase change properties were fabricated by polymerization of hexadecyl acrylate (HA) and different cross-linking agents. The samples were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). The results show that, the samples that added cross-linking agents have a smooth surface and the latent heat of them is different. The experiments show that all of the cross-linked copolymer shells can be made into temperature controlled release microspheres. These materials can be potentially applied in the field of thermal energy storage. β-tricalcium phosphate was encapsulated in microspheres to obtain one with a fast release effect. It will effectively promote bone conduction when these microspheres were implanted into a bone defect. This microsphere can be used for orthopedic implant or coating of instrument in the future.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

Sign in / Sign up

Export Citation Format

Share Document