scholarly journals Hardware-in-the-loop simulation of wave energy converters based on dielectric elastomer generators

Meccanica ◽  
2021 ◽  
Vol 56 (5) ◽  
pp. 1223-1237
Author(s):  
Giacomo Moretti ◽  
Andrea Scialò ◽  
Giovanni Malara ◽  
Giovanni Gerardo Muscolo ◽  
Felice Arena ◽  
...  
Keyword(s):  
Wave Energy ◽  
Large Scale ◽  
Low Cost ◽  
Test Site ◽  
Dielectric Elastomer ◽  
Operating Conditions ◽  
Polymer Materials ◽  
Hardware In The Loop ◽  
Wave Energy Converters ◽  
Energy Converters

AbstractDielectric elastomer generators (DEGs) are soft electrostatic generators based on low-cost electroactive polymer materials. These devices have attracted the attention of the marine energy community as a promising solution to implement economically viable wave energy converters (WECs). This paper introduces a hardware-in-the-loop (HIL) simulation framework for a class of WECs that combines the concept of the oscillating water columns (OWCs) with the DEGs. The proposed HIL system replicates in a laboratory environment the realistic operating conditions of an OWC/DEG plant, while drastically reducing the experimental burden compared to wave tank or sea tests. The HIL simulator is driven by a closed-loop real-time hydrodynamic model that is based on a novel coupling criterion which allows rendering a realistic dynamic response for a diversity of scenarios, including large scale DEG plants, whose dimensions and topologies are largely different from those available in the HIL setup. A case study is also introduced, which simulates the application of DEGs on an OWC plant installed in a mild real sea laboratory test-site. Comparisons with available real sea-test data demonstrated the ability of the HIL setup to effectively replicate a realistic operating scenario. The insights gathered on the promising performance of the analysed OWC/DEG systems pave the way to pursue further sea trials in the future.

Peakedness of Wave Systems Observed on the French Wave Energy Test Site (SEM-REV) Using a Spectral Partitioning Algorithm

2013 ◽  
Author(s):  
Jean-Baptiste Saulnier ◽  
Izan Le Crom
Keyword(s):  
Wave Energy ◽  
Test Site ◽  
Extreme Conditions ◽  
Multiple Wave ◽  
Wave Energy Converters ◽  
Marine Energy ◽  
Partitioning Algorithm ◽  
Spectral Partitioning ◽  
The Individual ◽  
Energy Converters

Located off the Guérande peninsula, SEM-REV is the French maritime facility dedicated to the testing of wave energy converters and related components. Lead by Ecole Centrale de Nantes through the LHEEA laboratory, its aim is to promote research alongside the development of new offshore technologies. To this end, the 1km2, grid-connected zone is equipped with a comprehensive instruments network sensing met-ocean processes and especially waves, with two identical directional Waverider buoys deployed on the site since 2009. For the design of moored floating structures and, a fortiori, floating marine energy converters, the knowledge of the main wave resource — for regular operation — but also extreme conditions — for moorings and device survivability — has to be as precise as possible. Also, the consideration of the multiple wave systems (swell, wind sea) making up the sea state is a key asset for the support of developers before and during the testing phase. To this end, a spectral partitioning algorithm has been implemented which enables the individual characterisation of wave systems, in particular that of their spectral peakedness which is especially addressed in this work. Peakedness has been shown to be strongly related to the groupiness of large waves and is defined here as the standard JONSWAP’s peak enhancement factor γ. Statistics related to this quantity are derived from the measurement network, with a particular focus on the extreme conditions reported on SEM-REV (Joachim storm).

Numerical Modeling to Aid in the Structural Health Monitoring of Wave Energy Converters

2013 ◽  
Vol 569-570 ◽  
pp. 595-602 ◽  
Author(s):  
William Finnegan ◽  
Jamie Goggins
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Wave Energy ◽  
Numerical Models ◽  
Wave Structure ◽  
Ocean Waves ◽  
Test Site ◽  
Structural Health ◽  
Wave Energy Converters ◽  
Energy Converters

A vital aspect of ensuring the cost effectiveness of wave energy converters (WECs) is being able to monitor their performance remotely through structural health monitoring, as these devices are deployed in very harsh environments in terms of both accessibility and potential damage to the devices. The WECs are monitored through the use of measuring equipment, which is strategically placed on the device. This measured data is then compared to the output from a numerical model of the WEC under the same ocean wave conditions. Any deviations would suggest that there are problems or issues with the WEC. The development of accurate and effective numerical models is necessary to minimise the number of times the visual, or physical, inspection of a deployed WEC is required. In this paper, a numerical wave tank model is, first, validated by comparing the waves generated to those generated experimentally using the wave flume located at the National University of Ireland, Galway. This model is then extended so it is suitable for generating real ocean waves. A wave record observed at the Atlantic marine energy test site has been replicated in the model to a high level of accuracy. A rectangular floating prism is then introduced into the model in order to explore wave-structure interaction. The dynamic response of the structure is compared to a simple analytical solution and found to be in good agreement.

Offshore Deployment of Point Absorbing Wave Energy Converters With a Direct Driven Linear Generator Power Take-Off at the Lysekil Test Site

2014 ◽  
Author(s):  
Maria A. Chatzigiannakou ◽  
Irina Dolguntseva ◽  
Mats Leijon
Keyword(s):  
Wave Energy ◽  
New Technologies ◽  
Test Site ◽  
Underwater Robots ◽  
Safety Issues ◽  
Linear Generator ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Cost Efficient ◽  
Energy Converters

Within the year 2013, four linear generators with point absorber buoy systems were deployed in the Lysekil test site. Until now, deployments of these point absorbing wave energy converters have been expensive, time consuming, complicated and raised safety issues. In the present paper, we focus on the analysis and optimization of the offshore deployment process of wave energy converters with a linear generator power take-off which has been constructed by Uppsala University. To address the crucial issues regarding the deployment difficulties, case study of previous offshore deployments at the Lysekil test site are presented regarding such parameters as safety, cost and time efficiency. It was discovered that the deployment process can be improved significantly, mainly by using new technologies, e.g., new specialized deployment vessels, underwater robots for inspections and for connecting cables and an automatized pressurizing process. Addressing the main deployment difficulties and constrains leads us to discovery of methods that makes offshore deployments more cost-efficient and faster, in a safety context.

scholarly journals Grid Impact of a Wave Farm on its Local Network: Analysis of Voltage and Flicker Levels

2012 ◽  
Author(s):  
Anne Blavette ◽  
Dara L. O’Sullivan ◽  
Ray Alcorn ◽  
Anthony W. Lewis ◽  
Michael G. Egan
Keyword(s):  
Time Series ◽  
Wave Energy ◽  
Large Scale ◽  
Negative Impact ◽  
Electrical Power ◽  
Local Network ◽  
Wave Energy Converters ◽  
Wave Farm ◽  
The Impact ◽  
Energy Converters

Most oscillating wave energy converters without significant amounts of energy storage capacity generate significant electrical power fluctuations in the range of seconds. Because of these fluctuations, a wave farm may have a negative impact on the power quality of the local grid to which it is connected. Hence, the impact of these devices on both distribution and transmission networks needs to be well understood, before large scale wave farms can be allowed to connect to the grid. This paper details a case study on the impact of a wave farm on the distribution grid around the national wave test site of Ireland. The electrical power output of the oscillating water column (OWC) wave energy converters was derived from experimental time series produced in the context of the FP7 project “CORES”. The results presented in this paper consider voltage fluctuation levels and flicker levels for a typical time series. Simulations were performed using DIgSILENT simulation tool “PowerFactory”.

Dynamic Model of Dielectric Elastomer Diaphragm Generators for Oscillating Water Column Wave Energy Converters

2013 ◽  
Author(s):  
Gastone Pietro Rosati Papini ◽  
Rocco Vertechy ◽  
Marco Fontana
Keyword(s):  
Water Column ◽  
Dynamic Model ◽  
Wave Energy ◽  
Mechanical Response ◽  
Low Cost ◽  
Oscillating Water Column ◽  
Fast Analysis ◽  
Wave Energy Converters ◽  
Highly Nonlinear ◽  
Energy Converters

Dielectric Elastomers (DEs) are incompressible rubber-like solids whose electrical and structural responses are highly nonlinear and strongly coupled. Thanks to their coupled electro-mechanical response, intrinsic lightness, easy-manufacturability and low-cost, DEs are perfectly suited for the development of novel solid-state polymeric energy conversion units with capacitive nature and high-voltage operation, which are more resilient, lightweight, integrated, economic and disposable than traditional generators based on conventional electromagnetic technology. Inflated Circular Diaphragm DE Generators (ICD-DEGs) are a special embodiment of polymeric transducer which can be used to convert pneumatic energy into usable electricity. Potential application of ICD-DEGs is as Power Take-Off (PTO) system for wave energy converters based on the Oscillating Water Column (OWC) principle. This paper presents a reduced, yet accurate, dynamic model for ICD-DEGs which features one degree of freedom and which accounts for DE visco-elasticity. The model is computationally simple and can be easily integrated into existing wave-to-wire models of OWCs to be used for fast analysis and real-time applications. For demonstration purposes, integration of the considered ICD-DEG model with a lumped-parameter hydrodynamic model of a realistic OWC is also presented along with a simulation case study.

scholarly journals Reduced Model and Application of Inflating Circular Diaphragm Dielectric Elastomer Generators for Wave Energy Harvesting

2015 ◽  
Vol 137 (1) ◽  
Author(s):  
Rocco Vertechy ◽  
Gastone Pietro Papini Rosati ◽  
Marco Fontana
Keyword(s):  
Wave Energy ◽  
Low Cost ◽  
Dielectric Elastomer ◽  
Fast Analysis ◽  
Strongly Coupled ◽  
Wave Energy Converters ◽  
Lumped Parameter ◽  
Highly Nonlinear ◽  
Structural Responses ◽  
Circular Diaphragm

Dielectric elastomers (DE) are incompressible rubberlike solids whose electrical and structural responses are highly nonlinear and strongly coupled. Thanks to their coupled electromechanical response, intrinsic lightness, easy manufacturability, and low-cost, DEs are perfectly suited for the development of novel solid-state polymeric energy conversion units with capacitive nature and high-voltage operation, which are more resilient, lightweight, integrated, economic, and disposable than traditional generators based on conventional electromagnetic technology. Inflated circular diaphragm dielectric elastomer generators (ICD-DEG) are a special embodiment of polymeric transducer that can be used to convert pneumatic energy into usable electricity. Potential application of ICD-DEG is as power take-off system for wave energy converters (WEC) based on the oscillating water column (OWC) principle. This paper presents a reduced, yet accurate, dynamic model for ICD-DEG that features one kinematic degree of freedom and which accounts for DE visco-elasticity. The model is computationally simple and can be easily integrated into existing wave-to-wire models of OWCs to be used for fast analysis and real-time applications. For demonstration purposes, integration of the considered ICD-DEG model with a lumped-parameter hydrodynamic model of a realistic OWC is also presented along with a simulation case study.

Sign in / Sign up

Export Citation Format

Share Document