Offshore Deployment of Point Absorbing Wave Energy Converters With a Direct Driven Linear Generator Power Take-Off at the Lysekil Test Site

2014 ◽  
Author(s):  
Maria A. Chatzigiannakou ◽  
Irina Dolguntseva ◽  
Mats Leijon
Keyword(s):  
Wave Energy ◽  
New Technologies ◽  
Test Site ◽  
Underwater Robots ◽  
Safety Issues ◽  
Linear Generator ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Cost Efficient ◽  
Energy Converters

Within the year 2013, four linear generators with point absorber buoy systems were deployed in the Lysekil test site. Until now, deployments of these point absorbing wave energy converters have been expensive, time consuming, complicated and raised safety issues. In the present paper, we focus on the analysis and optimization of the offshore deployment process of wave energy converters with a linear generator power take-off which has been constructed by Uppsala University. To address the crucial issues regarding the deployment difficulties, case study of previous offshore deployments at the Lysekil test site are presented regarding such parameters as safety, cost and time efficiency. It was discovered that the deployment process can be improved significantly, mainly by using new technologies, e.g., new specialized deployment vessels, underwater robots for inspections and for connecting cables and an automatized pressurizing process. Addressing the main deployment difficulties and constrains leads us to discovery of methods that makes offshore deployments more cost-efficient and faster, in a safety context.

Peakedness of Wave Systems Observed on the French Wave Energy Test Site (SEM-REV) Using a Spectral Partitioning Algorithm

2013 ◽  
Author(s):  
Jean-Baptiste Saulnier ◽  
Izan Le Crom
Keyword(s):  
Wave Energy ◽  
Test Site ◽  
Extreme Conditions ◽  
Multiple Wave ◽  
Wave Energy Converters ◽  
Marine Energy ◽  
Partitioning Algorithm ◽  
Spectral Partitioning ◽  
The Individual ◽  
Energy Converters

Located off the Guérande peninsula, SEM-REV is the French maritime facility dedicated to the testing of wave energy converters and related components. Lead by Ecole Centrale de Nantes through the LHEEA laboratory, its aim is to promote research alongside the development of new offshore technologies. To this end, the 1km2, grid-connected zone is equipped with a comprehensive instruments network sensing met-ocean processes and especially waves, with two identical directional Waverider buoys deployed on the site since 2009. For the design of moored floating structures and, a fortiori, floating marine energy converters, the knowledge of the main wave resource — for regular operation — but also extreme conditions — for moorings and device survivability — has to be as precise as possible. Also, the consideration of the multiple wave systems (swell, wind sea) making up the sea state is a key asset for the support of developers before and during the testing phase. To this end, a spectral partitioning algorithm has been implemented which enables the individual characterisation of wave systems, in particular that of their spectral peakedness which is especially addressed in this work. Peakedness has been shown to be strongly related to the groupiness of large waves and is defined here as the standard JONSWAP’s peak enhancement factor γ. Statistics related to this quantity are derived from the measurement network, with a particular focus on the extreme conditions reported on SEM-REV (Joachim storm).

Numerical Modeling to Aid in the Structural Health Monitoring of Wave Energy Converters

2013 ◽  
Vol 569-570 ◽  
pp. 595-602 ◽  
Author(s):  
William Finnegan ◽  
Jamie Goggins
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Wave Energy ◽  
Numerical Models ◽  
Wave Structure ◽  
Ocean Waves ◽  
Test Site ◽  
Structural Health ◽  
Wave Energy Converters ◽  
Energy Converters

A vital aspect of ensuring the cost effectiveness of wave energy converters (WECs) is being able to monitor their performance remotely through structural health monitoring, as these devices are deployed in very harsh environments in terms of both accessibility and potential damage to the devices. The WECs are monitored through the use of measuring equipment, which is strategically placed on the device. This measured data is then compared to the output from a numerical model of the WEC under the same ocean wave conditions. Any deviations would suggest that there are problems or issues with the WEC. The development of accurate and effective numerical models is necessary to minimise the number of times the visual, or physical, inspection of a deployed WEC is required. In this paper, a numerical wave tank model is, first, validated by comparing the waves generated to those generated experimentally using the wave flume located at the National University of Ireland, Galway. This model is then extended so it is suitable for generating real ocean waves. A wave record observed at the Atlantic marine energy test site has been replicated in the model to a high level of accuracy. A rectangular floating prism is then introduced into the model in order to explore wave-structure interaction. The dynamic response of the structure is compared to a simple analytical solution and found to be in good agreement.

Experimental and numerical comparisons of self-reacting point absorber wave energy converters in regular waves

2015 ◽  
Vol 104 ◽  
pp. 370-386 ◽  
Author(s):  
Scott J. Beatty ◽  
Matthew Hall ◽  
Bradley J. Buckham ◽  
Peter Wild ◽  
Bryce Bocking
Keyword(s):  
Wave Energy ◽  
Regular Waves ◽  
Numerical Comparisons ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Energy Converters

Design and testing of a laboratory scale test rig for wave energy converters using a double‐sided permanent magnet linear generator

2017 ◽  
Vol 11 (7) ◽  
pp. 922-930 ◽  
Author(s):  
Addy Wahyudie ◽  
Mohammed Jama ◽  
Tri Bagus Susilo ◽  
Bisni Fahad Mon ◽  
Hussein Shaaref ◽  
...  
Keyword(s):  
Permanent Magnet ◽  
Wave Energy ◽  
Laboratory Scale ◽  
Test Rig ◽  
Linear Generator ◽  
Wave Energy Converters ◽  
Scale Test ◽  
Design And Testing ◽  
Energy Converters

scholarly journals Hardware-in-the-loop simulation of wave energy converters based on dielectric elastomer generators

Meccanica ◽  
2021 ◽  
Vol 56 (5) ◽  
pp. 1223-1237
Author(s):  
Giacomo Moretti ◽  
Andrea Scialò ◽  
Giovanni Malara ◽  
Giovanni Gerardo Muscolo ◽  
Felice Arena ◽  
...  
Keyword(s):  
Wave Energy ◽  
Large Scale ◽  
Low Cost ◽  
Test Site ◽  
Dielectric Elastomer ◽  
Operating Conditions ◽  
Polymer Materials ◽  
Hardware In The Loop ◽  
Wave Energy Converters ◽  
Energy Converters

AbstractDielectric elastomer generators (DEGs) are soft electrostatic generators based on low-cost electroactive polymer materials. These devices have attracted the attention of the marine energy community as a promising solution to implement economically viable wave energy converters (WECs). This paper introduces a hardware-in-the-loop (HIL) simulation framework for a class of WECs that combines the concept of the oscillating water columns (OWCs) with the DEGs. The proposed HIL system replicates in a laboratory environment the realistic operating conditions of an OWC/DEG plant, while drastically reducing the experimental burden compared to wave tank or sea tests. The HIL simulator is driven by a closed-loop real-time hydrodynamic model that is based on a novel coupling criterion which allows rendering a realistic dynamic response for a diversity of scenarios, including large scale DEG plants, whose dimensions and topologies are largely different from those available in the HIL setup. A case study is also introduced, which simulates the application of DEGs on an OWC plant installed in a mild real sea laboratory test-site. Comparisons with available real sea-test data demonstrated the ability of the HIL setup to effectively replicate a realistic operating scenario. The insights gathered on the promising performance of the analysed OWC/DEG systems pave the way to pursue further sea trials in the future.

Performance assessments of the fully submerged sphere and cylinder point absorber wave energy converters

2019 ◽  
Vol 33 (13) ◽  
pp. 1950168 ◽  
Author(s):  
Qianlong Xu ◽  
Ye Li ◽  
Yingkai Xia ◽  
Weixing Chen ◽  
Feng Gao
Keyword(s):  
Wave Height ◽  
Wave Energy ◽  
Interaction Analysis ◽  
Wave Power ◽  
Viscous Damping ◽  
Power Performance ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Submerged Sphere ◽  
Energy Converters

Fully submerged sphere and cylinder point absorber (PA), wave energy converters (WECs) are analyzed numerically based on linearized potential flow theory. A boundary element method (BEM) (a radiation–diffraction panel program for wave-body interactions) is used for the basic wave-structure interaction analysis. In the present numerical model, the viscous damping is modeled by an equivalent linearized damping which extracts the same amount of wave energy over one cycle as the conventional quadratic damping term. The wave power capture width in each case is predicted. Comparisons are also made between the sphere and cylinder PAs which have identical geometrical scales and submerged depths. The results show that: (i) viscous damping has a greater influence on wave power performance of the cylinder PA than that of the sphere PA; (ii) the increasing wave height reduces wave power performance of PAs; (iii) the cylinder PA has a better wave power performance compared to the sphere PA in larger wave height scenarios, which indicates that fully submerged cylinder PA is a preferable prototype of WEC.

Sign in / Sign up

Export Citation Format

Share Document