scholarly journals Robustness of digital camera identification with convolutional neural networks

2021 ◽  
Author(s):  
Jarosław Bernacki
Keyword(s):  
Digital Forensics ◽  
Random Noise ◽  
Digital Camera ◽  
Image Database ◽  
Poor Quality ◽  
High Accuracy ◽  
Digital Cameras ◽  
Least Significant Bit ◽  
Camera Identification ◽  
Social Media Platforms

AbstractThis paper considers the area of digital forensics (DF). One of the problem in DF is the issue of identification of digital cameras based on images. This aspect has been attractive in recent years due to popularity of social media platforms like Facebook, Twitter etc., where lots of photographs are shared. Although many algorithms and methods for digital camera identification have been proposed, there is lack of research about their robustness. Therefore, in this paper the robustness of digital camera identification with the use of convolutional neural network is discussed. It is assumed that images may be of poor quality, for example, degraded by Poisson noise, Gaussian blur, random noise or removing pixels’ least significant bit. Experimental evaluation conducted on two large image datasets (including Dresden Image Database) confirms usefulness of proposed method, where noised images are recognized with almost the same high accuracy as normal images.

scholarly journals Optical Inspection Systems for Axisymmetric Parts with Spatial 2D Resolution

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1218
Author(s):  
Aleksandr Kulchitskiy
Keyword(s):  
Control System ◽  
Optical System ◽  
Measurement Accuracy ◽  
Experimental Studies ◽  
Digital Camera ◽  
Digital Cameras ◽  
Bodies Of Revolution ◽  
Optical Inspection ◽  
Inspection Systems ◽  
Projection Error

The article proposes a solution to the problem of increasing the accuracy of determining the main shaping dimensions of axisymmetric parts through a control system that implements the optical method of spatial resolution. The influence of the projection error of a passive optical system for controlling the geometric parameters of bodies of revolution from the image of its sections, obtained by a digital camera with non-telecentric optics, on the measurement accuracy is shown. Analytical dependencies are derived that describe the features of the transmission of measuring information of a system with non-telecentric optics in order to estimate the projection error. On the basis of the obtained dependences, a method for compensating the projection error of the systems for controlling the geometry of the main shaping surfaces of bodies of revolution has been developed, which makes it possible to increase the accuracy of determining dimensions when using digital cameras with a resolution of 5 megapixels or more, equipped with short-focus lenses. The possibility of implementing the proposed technique is confirmed by the results of experimental studies.

scholarly journals Bionic Birdlike Imaging Using a Multi-Hyperuniform LED Array

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4084
Author(s):  
Xin-Yu Zhao ◽  
Li-Jing Li ◽  
Lei Cao ◽  
Ming-Jie Sun
Keyword(s):  
Imaging System ◽  
Color Image ◽  
Digital Camera ◽  
Frame Rate ◽  
Digital Cameras ◽  
Structured Illumination ◽  
Pixel Resolution ◽  
Led Array ◽  
Frequency Aliasing ◽  
Imaging Sensors

Digital cameras obtain color information of the scene using a chromatic filter, usually a Bayer filter, overlaid on a pixelated detector. However, the periodic arrangement of both the filter array and the detector array introduces frequency aliasing in sampling and color misregistration during demosaicking process which causes degradation of image quality. Inspired by the biological structure of the avian retinas, we developed a chromatic LED array which has a geometric arrangement of multi-hyperuniformity, which exhibits an irregularity on small-length scales but a quasi-uniformity on large scales, to suppress frequency aliasing and color misregistration in full color image retrieval. Experiments were performed with a single-pixel imaging system using the multi-hyperuniform chromatic LED array to provide structured illumination, and 208 fps frame rate was achieved at 32 × 32 pixel resolution. By comparing the experimental results with the images captured with a conventional digital camera, it has been demonstrated that the proposed imaging system forms images with less chromatic moiré patterns and color misregistration artifacts. The concept proposed verified here could provide insights for the design and the manufacturing of future bionic imaging sensors.

Optimal Data-Driven Modeling-Free Differential-Inversion-Based Iterative Control: A Wafer Stage Example

2020 ◽  
Author(s):  
Zezhou Zhang ◽  
Qingze Zou
Keyword(s):  
System Dynamics ◽  
High Performance ◽  
Random Noise ◽  
High Accuracy ◽  
Data Driven ◽  
Modeling Process ◽  
Random Disturbances ◽  
Noise Disturbances ◽  
Data Driven Modeling ◽  
Iterative Control

Abstract In this paper, an optimal data-driven modeling-free differential-inversion-based iterative control (OMFDIIC) method is proposed for both high performance and robustness in the presence of random disturbances. Achieving high accuracy and fast convergence is challenging as the system dynamics behaviors vary due to the external uncertainties and the system bandwidth is limited. The aim of the proposed method is to compensate for the dynamics effect without modeling process and achieve both high accuracy and robust convergence, by extending the existed modeling-free differential-inversion-based iterative control (MFDIIC) method through a frequency- and iteration-dependent gain. The convergence of the OMFDIIC method is analyzed with random noise/disturbances considered. The developed method is applied to a wafer stage, and shows a significant improvement in the performance.

Designing a Color Filter with High Overall Transmittance for Improving the Color Accuracy of Digital Cameras

2021 ◽  
Vol 2021 (29) ◽  
pp. 1-6
Author(s):  
Yuteng Zhu ◽  
Graham D. Finlayson
Keyword(s):  
White Light ◽  
Digital Camera ◽  
Color Filter ◽  
Digital Cameras ◽  
Spectral Transmittance ◽  
Optimal Filters ◽  
Prior Art ◽  
Average Transmittance ◽  
Tristimulus Values ◽  
Correction Problem

Previously improved color accuracy of a given digital camera was achieved by carefully designing the spectral transmittance of a color filter to be placed in front of the camera. Specifically, the filter is designed in a way that the spectral sensitivities of the camera after filtering are approximately linearly related to the color matching functions (or tristimulus values) of the human visual system. To avoid filters that absorbed too much light, the optimization could incorporate a minimum per wavelength transmittance constraint. In this paper, we change the optimization so that the overall filter transmittance is bounded, i.e. we solve for the filter that (for a uniform white light) transmits (say) 50% of the light. Experiments demonstrate that these filters continue to solve the color correction problem (they make cameras much more colorimetric). Significantly, the optimal filters by restraining the average transmittance can deliver a further 10% improvement in terms of color accuracy compared to the prior art of bounding the low transmittance.

Part Monitoring and Quality Assessment of Conformal Additive Manufacturing Using Image Reconstruction

2018 ◽  
Author(s):  
Michael D. Kutzer ◽  
Levi D. DeVries ◽  
Cooper D. Blas
Keyword(s):  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Digital Camera ◽  
Image Data ◽  
Digital Cameras ◽  
Public And Private ◽  
The Public ◽  
Fused Deposition ◽  
Complex Part ◽  
Deposition Modeling

Additive manufacturing (AM) technologies have become almost universal in concept development, prototyping, and education. Advances in materials and methods continue to extend this technology to small batch and complex part manufacturing for the public and private sectors. Despite the growing popularity of digital cameras in AM systems, use of image data for part monitoring is largely unexplored. This paper presents a new method for estimating the 3D internal structure of fused deposition modeling (FDM) processes using image data from a single digital camera. Relative transformations are established using motion capture, and the 3D model is created using knowledge of the deposition path coupled with assumptions about the deposition cross-section. Results show that part geometry can be estimated and visualized using the methods presented in this work.

scholarly journals Three-Dimensional Liver Image Segmentation Using Generative Adversarial Networks Based on Feature Restoration

2022 ◽  
Vol 8 ◽  
Author(s):  
Runnan He ◽  
Shiqi Xu ◽  
Yashu Liu ◽  
Qince Li ◽  
Yang Liu ◽  
...  
Keyword(s):  
Medical Imaging ◽  
Random Noise ◽  
Three Dimensional ◽  
Poor Quality ◽  
Training Data ◽  
Generative Adversarial Networks ◽  
Liver Segmentation ◽  
Deep Convolutional Neural Networks ◽  
Adversarial Networks ◽  
Liver Region

Medical imaging provides a powerful tool for medical diagnosis. In the process of computer-aided diagnosis and treatment of liver cancer based on medical imaging, accurate segmentation of liver region from abdominal CT images is an important step. However, due to defects of liver tissue and limitations of CT imaging procession, the gray level of liver region in CT image is heterogeneous, and the boundary between the liver and those of adjacent tissues and organs is blurred, which makes the liver segmentation an extremely difficult task. In this study, aiming at solving the problem of low segmentation accuracy of the original 3D U-Net network, an improved network based on the three-dimensional (3D) U-Net, is proposed. Moreover, in order to solve the problem of insufficient training data caused by the difficulty of acquiring labeled 3D data, an improved 3D U-Net network is embedded into the framework of generative adversarial networks (GAN), which establishes a semi-supervised 3D liver segmentation optimization algorithm. Finally, considering the problem of poor quality of 3D abdominal fake images generated by utilizing random noise as input, deep convolutional neural networks (DCNN) based on feature restoration method is designed to generate more realistic fake images. By testing the proposed algorithm on the LiTS-2017 and KiTS19 dataset, experimental results show that the proposed semi-supervised 3D liver segmentation method can greatly improve the segmentation performance of liver, with a Dice score of 0.9424 outperforming other methods.

Sign in / Sign up

Export Citation Format

Share Document