scholarly journals Quantification of dwarfing effect of different rootstocks in ‘Picual’ olive cultivar using UAV-photogrammetry

2021 ◽  
Author(s):  
Jorge Torres-Sánchez ◽  
Raúl de la Rosa ◽  
Lorenzo León ◽  
Francisco M. Jiménez-Brenes ◽  
Amal Kharrat ◽  
...  
Keyword(s):  
Point Clouds ◽  
High Variability ◽  
Crown Height ◽  
Olive Cultivar ◽  
High Productivity ◽  
Canopy Volume ◽  
Aerial Vehicle ◽  
Breeding Selection ◽  
Selection For ◽  
Tree Vigour

AbstractHedgerow orchard is an olive growing system where trees are planted at a super high-density higher than 20-fold (i.e., 1200–2500 trees ha−1) compared to the traditional density of olive orchards (usually 50 to 160 trees ha−1). It is dominating a great proportion of new plantations because harvesting can be fully mechanized, it is early bearing and has a relatively constant high productivity. However, there are a limited number of cultivars with sufficiently low vigour to be suitable for such plantation densities. For that reason, a set of low vigour cultivars and breeding selections has been used in a field experiment as rootstocks for reducing the vigour of “Picual”, the most frequent cultivar planted in Spain. Tree vigour was characterized by measuring crown height, projected and side areas, and volume through the analysis of photogrammetric point clouds created from images acquired with an unmanned aerial vehicle. A significant reduction of the ‘Picual’ vigour was observed in most of the rootstocks tested, with canopy volume reduced up to one half. High variability on vigour, first harvesting and their relative relationship was observed between the different rootstocks used. This indicates there might be enough genetic variability to perform breeding selection for dwarfing rootstocks on ‘Picual’ olive cultivar.

scholarly journals Symmetry Analysis of Oriental Polygonal Pagodas Using 3D Point Clouds for Cultural Heritage

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1228
Author(s):  
Ting On Chan ◽  
Linyuan Xia ◽  
Yimin Chen ◽  
Wei Lang ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Unmanned Aerial Vehicle ◽  
Point Cloud ◽  
Geometric Model ◽  
Digital Camera ◽  
Point Clouds ◽  
Symmetry Analysis ◽  
3D Point Clouds ◽  
Transmission Towers ◽  
Aerial Vehicle

Ancient pagodas are usually parts of hot tourist spots in many oriental countries due to their unique historical backgrounds. They are usually polygonal structures comprised by multiple floors, which are separated by eaves. In this paper, we propose a new method to investigate both the rotational and reflectional symmetry of such polygonal pagodas through developing novel geometric models to fit to the 3D point clouds obtained from photogrammetric reconstruction. The geometric model consists of multiple polygonal pyramid/prism models but has a common central axis. The method was verified by four datasets collected by an unmanned aerial vehicle (UAV) and a hand-held digital camera. The results indicate that the models fit accurately to the pagodas’ point clouds. The symmetry was realized by rotating and reflecting the pagodas’ point clouds after a complete leveling of the point cloud was achieved using the estimated central axes. The results show that there are RMSEs of 5.04 cm and 5.20 cm deviated from the perfect (theoretical) rotational and reflectional symmetries, respectively. This concludes that the examined pagodas are highly symmetric, both rotationally and reflectionally. The concept presented in the paper not only work for polygonal pagodas, but it can also be readily transformed and implemented for other applications for other pagoda-like objects such as transmission towers.

scholarly journals Canopy Parameter Estimation of Citrus grandis var. Longanyou Based on LiDAR 3D Point Clouds

2021 ◽  
Vol 13 (9) ◽  
pp. 1859
Author(s):  
Xiangyang Liu ◽  
Yaxiong Wang ◽  
Feng Kang ◽  
Yang Yue ◽  
Yongjun Zheng
Keyword(s):  
Convex Hull ◽  
Clustering Algorithm ◽  
Plant Protection ◽  
Point Clouds ◽  
Biomass Estimation ◽  
Reconstruction Method ◽  
Volume Calculation ◽  
Alpha Shape ◽  
3D Point Clouds ◽  
Canopy Volume

The characteristic parameters of Citrus grandis var. Longanyou canopies are important when measuring yield and spraying pesticides. However, the feasibility of the canopy reconstruction method based on point clouds has not been confirmed with these canopies. Therefore, LiDAR point cloud data for C. grandis var. Longanyou were obtained to facilitate the management of groves of this species. Then, a cloth simulation filter and European clustering algorithm were used to realize individual canopy extraction. After calculating canopy height and width, canopy reconstruction and volume calculation were realized using six approaches: by a manual method and using five algorithms based on point clouds (convex hull, CH; convex hull by slices; voxel-based, VB; alpha-shape, AS; alpha-shape by slices, ASBS). ASBS is an innovative algorithm that combines AS with slices optimization, and can best approximate the actual canopy shape. Moreover, the CH algorithm had the shortest run time, and the R2 values of VCH, VVB, VAS, and VASBS algorithms were above 0.87. The volume with the highest accuracy was obtained from the ASBS algorithm, and the CH algorithm had the shortest computation time. In addition, a theoretical but preliminarily system suitable for the calculation of the canopy volume of C. grandis var. Longanyou was developed, which provides a theoretical reference for the efficient and accurate realization of future functional modules such as accurate plant protection, orchard obstacle avoidance, and biomass estimation.

scholarly journals Robust autonomous flight in cluttered environment using a depth sensor

2020 ◽  
Vol 12 ◽  
pp. 175682932092452
Author(s):  
Liang Lu ◽  
Alexander Yunda ◽  
Adrian Carrio ◽  
Pascual Campoy
Keyword(s):  
High Speed ◽  
Point Clouds ◽  
Depth Sensor ◽  
Cluttered Environments ◽  
Industrial Plants ◽  
Cluttered Environment ◽  
Navigation Strategy ◽  
Physical Sensors ◽  
Aerial Vehicle ◽  
Planning Objective

This paper presents a novel collision-free navigation system for the unmanned aerial vehicle based on point clouds that outperform compared to baseline methods, enabling high-speed flights in cluttered environments, such as forests or many indoor industrial plants. The algorithm takes the point cloud information from physical sensors (e.g. lidar, depth camera) and then converts it to an occupied map using Voxblox, which is then used by a rapid-exploring random tree to generate finite path candidates. A modified Covariant Hamiltonian Optimization for Motion Planning objective function is used to select the best candidate and update it. Finally, the best candidate trajectory is generated and sent to a Model Predictive Control controller. The proposed navigation strategy is evaluated in four different simulation environments; the results show that the proposed method has a better success rate and a shorter goal-reaching distance than the baseline method.

scholarly journals Comparing High Accuracy t-LiDAR and UAV-SfM Derived Point Clouds for Geomorphological Change Detection

2021 ◽  
Vol 10 (6) ◽  
pp. 367
Author(s):  
Simoni Alexiou ◽  
Georgios Deligiannakis ◽  
Aggelos Pallikarakis ◽  
Ioannis Papanikolaou ◽  
Emmanouil Psomiadis ◽  
...  
Keyword(s):  
Soil Erosion ◽  
Change Detection ◽  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Mean Value ◽  
Detection Methods ◽  
Mountainous Catchments ◽  
Aerial Vehicle ◽  
Soil Erosion Assessment

Analysis of two small semi-mountainous catchments in central Evia island, Greece, highlights the advantages of Unmanned Aerial Vehicle (UAV) and Terrestrial Laser Scanning (TLS) based change detection methods. We use point clouds derived by both methods in two sites (S1 & S2), to analyse the effects of a recent wildfire on soil erosion. Results indicate that topsoil’s movements in the order of a few centimetres, occurring within a few months, can be estimated. Erosion at S2 is precisely delineated by both methods, yielding a mean value of 1.5 cm within four months. At S1, UAV-derived point clouds’ comparison quantifies annual soil erosion more accurately, showing a maximum annual erosion rate of 48 cm. UAV-derived point clouds appear to be more accurate for channel erosion display and measurement, while the slope wash is more precisely estimated using TLS. Analysis of Point Cloud time series is a reliable and fast process for soil erosion assessment, especially in rapidly changing environments with difficult access for direct measurement methods. This study will contribute to proper georesource management by defining the best-suited methodology for soil erosion assessment after a wildfire in Mediterranean environments.

scholarly journals INTEGRATING TERRESTRIAL LIDAR WITH POINT CLOUDS CREATED FROM UNMANNED AERIAL VEHICLE IMAGERY

2015 ◽  
Vol XL-1/W4 ◽  
pp. 97-101 ◽  
Author(s):  
M. Leslar
Keyword(s):  
Point Cloud ◽  
Inertial Navigation System ◽  
Vertical Wall ◽  
Digital Camera ◽  
Point Clouds ◽  
Digital Photogrammetry ◽  
Lidar System ◽  
Terrestrial Lidar ◽  
Stereo Imagery ◽  
Aerial Vehicle

Using unmanned aerial vehicles (UAV) for the purposes of conducting high-accuracy aerial surveying has become a hot topic over the last year. One of the most promising means of conducting such a survey involves integrating a high-resolution non-metric digital camera with the UAV and using the principals of digital photogrammetry to produce high-density colorized point clouds. Through the use of stereo imagery, precise and accurate horizontal positioning information can be produced without the need for integration with any type of inertial navigation system (INS). Of course, some form of ground control is needed to achieve this result. Terrestrial LiDAR, either static or mobile, provides the solution. Points extracted from Terrestrial LiDAR can be used as control in the digital photogrammetry solution required by the UAV. In return, the UAV is an affordable solution for filling in the shadows and occlusions typically experienced by Terrestrial LiDAR. In this paper, the accuracies of points derived from a commercially available UAV solution will be examined and compared to the accuracies achievable by a commercially available LIDAR solution. It was found that the LiDAR system produced a point cloud that was twice as accurate as the point cloud produced by the UAV’s photogrammetric solution. Both solutions gave results within a few centimetres of the control field. In addition the about of planar dispersion on the vertical wall surfaces in the UAV point cloud was found to be multiple times greater than that from the horizontal ground based UAV points or the LiDAR data.

scholarly journals Estimating Canopy Parameters Based on the Stem Position in Apple Trees Using a 2D LiDAR

Agronomy ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 740 ◽  
Author(s):  
Nikos Tsoulias ◽  
Dimitrios S. Paraforos ◽  
Spyros Fountas ◽  
Manuela Zude-Sasse
Keyword(s):  
Incident Angle ◽  
Structural Parameters ◽  
Point Clouds ◽  
Absolute Error ◽  
Apple Orchard ◽  
Stem Diameter ◽  
Coefficient Of Determination ◽  
Individual Tree ◽  
Canopy Volume ◽  
Stem Position

Data of canopy morphology are crucial for cultivation tasks within orchards. In this study, a 2D light detection and range (LiDAR) laser scanner system was mounted on a tractor, tested on a box with known dimensions (1.81 m × 0.6 m × 0.6 m), and applied in an apple orchard to obtain the 3D structural parameters of the trees (n = 224). The analysis of a metal box which considered the height of four sides resulted in a mean absolute error (MAE) of 8.18 mm with a bias (MBE) of 2.75 mm, representing a root mean square error (RMSE) of 1.63% due to gaps in the point cloud and increased incident angle with enhanced distance between laser aperture and the object. A methodology based on a bivariate point density histogram is proposed to estimate the stem position of each tree. The cylindrical boundary was projected around the estimated stem positions to segment each individual tree. Subsequently, height, stem diameter, and volume of the segmented tree point clouds were estimated and compared with manual measurements. The estimated stem position of each tree was defined using a real time kinematic global navigation satellite system, (RTK-GNSS) resulting in an MAE and MBE of 33.7 mm and 36.5 mm, respectively. The coefficient of determination (R2) considering manual measurements and estimated data from the segmented point clouds appeared high with, respectively, R2 and RMSE of 0.87 and 5.71% for height, 0.88 and 2.23% for stem diameter, as well as 0.77 and 4.64% for canopy volume. Since a certain error for the height and volume measured manually can be assumed, the LiDAR approach provides an alternative to manual readings with the advantage of getting tree individual data of the entire orchard.

YIELD EFFICIENCY IN PROGENY TRIALS WITH COCOA

2006 ◽  
Vol 42 (3) ◽  
pp. 289-299 ◽  
Author(s):  
JOE THAU-YIN PANG
Keyword(s):  
Papua New Guinea ◽  
General Combining Ability ◽  
Planting Density ◽  
Peruvian Amazon ◽  
Cross Sectional ◽  
Yield Efficiency ◽  
Additive Inheritance ◽  
Breeding Selection ◽  
Selection For ◽  
Current Stage

Yield efficiency of cocoa, defined as yield over a period of time divided by the increment in trunk cross-sectional area over that period, was estimated in four factorial matings in Sabah, Malaysia, evaluated at a single planting density. The parents were 18 seedlings of Upper Amazon Forastero type, broadly representative of Peruvian Amazon material, and 15 clones of Trinitario type, selected from cultivated cocoa in Ecuador, Trinidad and Papua New Guinea. Both the Upper Amazon and Trinitario parents varied in general combining ability (gca) for yield efficiency, with strong evidence of additive inheritance of the trait. Some of the Upper Amazon parents showed higher yield efficiency than many of the Trinitarios. Correlations between gcas for yield efficiency and yield were inconsistent. This is thought to be because the parents differed markedly in optimal planting density, which is higher for many of the Upper Amazons with high gca for yield efficiency than it is for some of the Trinitarios. At the current stage of cocoa breeding, selection for adaptation to planting density is a higher priority than selection for yield efficiency.

scholarly journals Estimating Maize Above-Ground Biomass Using 3D Point Clouds of Multi-Source Unmanned Aerial Vehicle Data at Multi-Spatial Scales

2019 ◽  
Vol 11 (22) ◽  
pp. 2678 ◽  
Author(s):  
Zhu ◽  
Sun ◽  
Peng ◽  
Huang ◽  
Li ◽  
...  
Keyword(s):  
Precision Agriculture ◽  
Spatial Scales ◽  
Point Clouds ◽  
Support Vector ◽  
Above Ground Biomass ◽  
Ground Biomass ◽  
3D Point Clouds ◽  
Vehicle Data ◽  
Aerial Vehicle ◽  
Multispectral Camera

Crop above-ground biomass (AGB) is a key parameter used for monitoring crop growth and predicting yield in precision agriculture. Estimating the crop AGB at a field scale through the use of unmanned aerial vehicles (UAVs) is promising for agronomic application, but the robustness of the methods used for estimation needs to be balanced with practical application. In this study, three UAV remote sensing flight missions (using a multiSPEC-4C multispectral camera, a Micasense RedEdge-M multispectral camera, and an Alpha Series AL3-32 Light Detection and Ranging (LiDAR) sensor onboard three different UAV platforms) were conducted above three long-term experimental plots with different tillage treatments in 2018. We investigated the performances of the multi-source UAV-based 3D point clouds at multi-spatial scales using the traditional multi-variable linear regression model (OLS), random forest (RF), backpropagation neural network (BP), and support vector machine (SVM) methods for accurate AGB estimation. Results showed that crop height (CH) was a robust proxy for AGB estimation, and that high spatial resolution in CH datasets helps to improve maize AGB estimation. Furthermore, the OLS, RF, BP, and SVM methods all maintained an acceptable accuracy for AGB estimation; however, the SVM and RF methods performed slightly more robustly. This study is expected to optimize UAV systems and algorithms for specific agronomic applications.

Sign in / Sign up

Export Citation Format

Share Document