Effect of Magnesium Diffusion Into the Active Region of LED Structures with InGaN/GaN Quantum Wells on Internal Quantum Efficiency

Enhancement of internal quantum efficiency (IQE) in InGaN quantum wells by insertion of a superlattice interlayer and applying the pulsed growth regime is investigated by a set of time-resolved optical techniques. A threefold IQE increase was achieved in the structure with the superlattice. It was ascribed to the net effect of decreased internal electrical field due to lower strain and altered carrier localization conditions. Pulsed MOCVD growth also resulted in twice higher IQE, presumably due to better control of defects in the structure. An LED (light emitting diode) structure with a top p-type contact GaN layer was manufactured by using both growth techniques with the peak IQE equal to that in the underlying quantum well structure. The linear recombination coefficient was found to gradually increase with excitation due to carrier delocalization, and the latter dependence was successfully used to fit the IQE droop.

Download Full-text

1.5 micron InAs quantum dot lasers based on metamorphic InGaAs/GaAs heterostructures.

MRS Proceedings ◽

10.1557/proc-794-t7.2/z7.2 ◽

2003 ◽

Vol 794 ◽

Author(s):

V.M. Ustinov ◽

A.E. Zhukov ◽

A.R. Kovsh ◽

N.A. Maleev ◽

S.S. Mikhrin ◽

...

Keyword(s):

Quantum Dots ◽

Active Region ◽

Quantum Wells ◽

Gaas Substrate ◽

Room Temperature ◽

Internal Quantum Efficiency ◽

Characteristic Temperature ◽

Optical Loss ◽

Threshold Current ◽

Temperature Threshold

ABSTRACT1.5 micron range emission has been realized using the InAs quantum dots embedded into the metamorphic InGaAs layer containing 20% of InAs grown by MBE on a GaAs substrate. Growth regimes were optimized to reduce significantly the density of dislocations propagating into the active layer from the lattice mismatched interface. 2 mm long InGaAs/InGaAlAs lasers with 10 planes of quantum dots in the active region showed threshold current density about 1.4 kA/cm2 with the external differential efficiency as high as 38%. Lasing wavelength depends on the optical loss being in the 1.44–1.49 micron range at room temperature. On increasing the temperature the wavelength reaches 1.515 micron at 85C while the threshold current characteristic temperature of 55–60K was estimated. High internal quantum efficiency (η>60%)and low internal losses (α=3–4 cm ) were realized. Maximum room temperature output power in pulsed regime as high as 5.5 W for 100 micron wide stripe was demonstrated. Using the same concept 1.3 micron InGaAs/InGaAlAs quantum well lasers were fabricated. The active region contained quantum wells with high (∼40%) indium content which was possible due to the intermediate InGaAs strain relaxation layer. 1 mm stripe lasers showed room temperature threshold current densities about 3.3 kA/cm (λ=1.29 micron) and 400 A/cm2 at 85K. Thus, the use of metamorphic InGaAs layers on GaAs substrate is a very promising approach for increasing the emission wavelength of GaAs based lasers.

Download Full-text