Reusable Piezocatalytic Water Disinfection Activity of CVD Grown WS2 Few-layer on Sapphire Substrate

Piezocatalysis of semiconductors is an arising technology that transforms mechanical stress into chemical energy to enhance reaction rate with piezo-generated free charge carriers. In the present work, CVD-grown few-layer WS2...

Recent Advances in Fabricating Wurtzite AlN Film on (0001)-Plane Sapphire Substrate

Ultrawide bandgap (UWBG) semiconductor materials, with bandgaps far wider than the 3.4 eV of GaN, have attracted great attention recently. As a typical representative, wurtzite aluminum nitride (AlN) material has many advantages including high electron mobility, high breakdown voltage, high piezoelectric coefficient, high thermal conductivity, high hardness, high corrosion resistance, high chemical and thermal stability, high bulk acoustic wave velocity, prominent second-order optical nonlinearity, as well as excellent UV transparency. Therefore, it has wide application prospects in next-generation power electronic devices, energy-harvesting devices, acoustic devices, optical frequency comb, light-emitting diodes, photodetectors, and laser diodes. Due to the lack of low-cost, large-size, and high-ultraviolet-transparency native AlN substrate, however, heteroepitaxial AlN film grown on sapphire substrate is usually adopted to fabricate various devices. To realize high-performance AlN-based devices, we must first know how to obtain high-crystalline-quality and controllable AlN/sapphire templates. This review systematically summarizes the recent advances in fabricating wurtzite AlN film on (0001)-plane sapphire substrate. First, we discuss the control principles of AlN polarity, which greatly affects the surface morphology and crystalline quality of AlN, as well as the electronic and optoelectronic properties of AlN-based devices. Then, we introduce how to control threading dislocations and strain. The physical thoughts of some inspirational growth techniques are discussed in detail, and the threading dislocation density (TDD) values of AlN/sapphire grown by various growth techniques are compiled. We also introduce how to achieve high thermal conductivities in AlN films, which are comparable with those in bulk AlN. Finally, we summarize the future challenge of AlN films acting as templates and semiconductors. Due to the fast development of growth techniques and equipment, as well as the superior material properties, AlN will have wider industrial applications in the future.

Multiphoton Absorption Simulation of Sapphire Substrate under the Action of Femtosecond Laser for Larger Density of Pattern-Related Process Windows

It is essential to develop pattern-related process windows on substrate surface for reducing the dislocation density of wide bandgap semiconductor film growth. For extremely high instantaneous intensity and excellent photon absorption rate, femtosecond lasers are currently being increasingly adopted. However, the mechanism of the femtosecond laser developing pattern-related process windows on the substrate remains to be further revealed. In this paper, a model is established based on the Fokker–Planck equation and the two-temperature model (TTM) equation to simulate the ablation of a sapphire substrate under the action of a femtosecond laser. The transient nonlinear evolutions such as free electron density, absorption coefficient, and electron–lattice temperature are obtained. This paper focuses on simulating the multiphoton absorption of sapphire under femtosecond lasers of different wavelengths. The results show that within the range of 400 to 1030 nm, when the wavelength is large, the number of multiphoton required for ionization is larger, and wider and shallower ablation pits can be obtained. When the wavelength is smaller, the number of multiphoton is smaller, narrower and deeper ablation pits can be obtained. Under the simulation conditions presented in this paper, the minimum ablation pit depth can reach 0.11 μm and the minimum radius can reach 0.6 μm. In the range of 400 to 1030 nm, selecting a laser with a shorter wavelength can achieve pattern-related process windows with a smaller diameter, which is beneficial to increase the density of pattern-related process windows on the substrate surface. The simulation is consistent with existing theories and experimental results, and further reveals the transient nonlinear mechanism of the femtosecond laser developing the pattern-related process windows on the sapphire substrate.

Reactive RF magnetron sputtering epitaxy of NiO thin films on (0001) sapphire and (100) MgO substrates

Epitaxial growths of NiO thin films were realized on (0001) sapphire and (100) MgO substrates by using a reactive RF magnetron sputtering method. The NiO epilayers grown on a (0001) sapphire exhibited the (111)-oriented double-domain structure, which comprised of a triangular and its inverted triangular grains. Meanwhile, the NiO epilayers on a (100) MgO exhibited the (100)-oriented single-domain structure, which comprised of quadrangular grains. The observed grain structures most likely reflect the growth planes of respective NiO epilayers, and, mixed crystals of NiO and MgO were present near the interface. Therefore, A (100) MgO substrate is suitable for obtaining a single-domain NiO epilayer, whereas a (0001) sapphire substrate is suitable for obtaining a NiO epilayer without interdiffusion between NiO and sapphire. These NiO epilayers will be expected for applying the physical properties evaluation using photoluminescence or Hall measurements, and the fabrication of electrical or optical devices.

The study of spray impact on the heated sapphire plate

The process of the liquid spray impact on the heated surface is studied experimentally using the IR-transparent sapphire plate method. The spatiotemporal distribution of the temperature field on the sapphire substrate surface during impacting spray is received. The obtained experimental data are an important step in a study of the local characteristics of heat transfer in the areas of the contact lines during liquid spray impact on the heated surface. Further, the local heat fluxes and heat transfer coefficients will be determined by solving the problem of thermal conductivity in the sapphire substrate.