Application of Pilot-Scale-Constructed Wetland as Tertiary Treatment System of Wastewater for Phosphorus and Nitrogen Removal

2010 ◽  
Vol 218 (1-4) ◽  
pp. 131-143 ◽  
Author(s):  
Ana Cristina Curia ◽  
Jair Carlos Koppe ◽  
João F. C. L. Costa ◽  
Liliana Amaral Féris ◽  
Wagner David Gerber
2009 ◽  
Vol 60 (2) ◽  
pp. 301-309 ◽  
Author(s):  
P. G. Sonavane ◽  
G. R. Munavalli

A constructed wetland treatment system (CWTS) has been adopted for removal of nitrogen from wastewater. The design methodologies developed for CWTS in previous studies were based on thumb rules, and first order/Monod type kinetics models. The use of kinetic models is system/environment specific. There is scope to assess the potential of other reaction kinetic models for their usefulness and applicability. In the present study, lumped and distributed parameter models incorporated with various reactions kinetic were developed. The various processes were incorporated in distributed parameter model for nitrogen transformations. Laboratory/pilot-scale field experiments were carried out and used for verification and application of models developed. The reaction rate parameters were estimated using non-linear least square analysis. The results showed that the conditions within CWTS can be simulated by plug flow. The plant uptake rate was found to be higher than denitrification for nitrate removal. Nitrification and plant uptake are equally dominant for the removal of ammonia nitrogen. The relative contributions by various processes for nitrogen removal can be established using the distributed parameter model. The developed simulation model can be used as a CWTS planning and design tool for the effective control and treatment of nitrogen induced pollution.


2021 ◽  
Vol 13 (22) ◽  
pp. 12456
Author(s):  
Tao Wang ◽  
Liping Xiao ◽  
Hongbin Lu ◽  
Shaoyong Lu ◽  
Xiaoliang Zhao ◽  
...  

The quality of micropolluted water is unstable and its substrate concentration fluctuates greatly. The goal is to predict the concentration effect on the treatment of nitrogen in a river with an actual low C/N ratio for the proposed full-scale Xiaoyi River estuary wetland, so that the wetland project can operate stably and perform the water purification function effectively in the long term. Two pilot-scale multistage constructed wetland–pond (MCWP) systems (S1 and S2, respectively) based on actual engineering with the same “front ecological oxidation ponds, two-stage horizontal subsurface flow constructed wetlands and surface flow constructed wetlands (SFCWs) as the core and postsubmerged plant ponds” as the planned process were constructed to investigate the effect of different influent permanganate indexes (CODMn) and total nitrogen (TN) contents on nitrogen removal from micropolluted river water with a fixed C/N ratio from summer to winter in the field. The results indicate that the TN removal rate in the S1 and S2 systems was significant (19.56% and 34.84%, respectively). During the process of treating this micropolluted water with a fixed C/N ratio, the influent of S2 with a higher CODMn concentration was conducive to the removal of TN. The TN removal rate in S2 was significantly affected by the daily highest temperature. There was significant nitrogen removal efficiency in the SFCWs. The C/N ratio was a major determinant influencing the nitrogen removal rate in the SFCWs. The organic matter release phenomenon in SFCWs with high-density planting played an essential role in alleviating the lack of carbon sources in the influent. This research strongly supports the rule that there is seasonal nitrogen removal in the MCWPs under different influent substrate concentrations, which is of guiding significance for practical engineering.


2003 ◽  
Vol 37 (17) ◽  
pp. 4236-4242 ◽  
Author(s):  
P. Kuschk ◽  
A. Wießner ◽  
U. Kappelmeyer ◽  
E. Weißbrodt ◽  
M. Kästner ◽  
...  

2021 ◽  
Vol 25 (1) ◽  
pp. 640-649
Author(s):  
Linda Grinberga ◽  
Didzis Lauva ◽  
Ainis Lagzdins

Abstract Constructed wetlands as a treatment system are widely explored in different climate conditions and established to be effective in pollution removal from water environment. This study aims to demonstrate the performance of pilot-scale subsurface flow constructed wetland for storm water treatment in Latvia. The catchment basin was located in a farmyard of agricultural area and storm water was collected from the impermeable pavements. Storm water was accumulated in an open pond and periodically pumped above the filter part of the subsurface flow constructed wetland. Grab samples were collected once or twice per month at the inlet and outlet of the treatment system during a period of 73 months from year 2014 to 2020. Water quality parameters as nitrate nitrogen (NO3-N), ammonium nitrogen (NH4–N), total nitrogen (TN), orthophosphate phosphorus (PO4-P), and total phosphorus (TP), total suspended solids (TSS), biochemical oxygen demand (BOD5) and chemical oxygen demand (COD) were monitored. Water level at the inlet structure was automatically measured and flow rate was calculated based on the Manning equation for partially filled circular pipes. Results showed the reduction of average concentrations for all parameters during the study period. However, in some sampling cases concentrations increased at the outlet of the treatment system and can be explained by influencing factors of farming and maintenance. The treatment efficiency of NO3-N, NH4-N, TN, PO4-P, TP, TSS, BOD5 and COD concentrations was 17 %, 68 %, 55 %, 78 %, 80 %, 57 %, 80 % and 74 %, respectively. The study site demonstrated a potential to improve water quality in the long term.


2020 ◽  
Author(s):  
Liping Xiao ◽  
Tao Wang ◽  
Hongbin Lu ◽  
Shaoyong Lu ◽  
Jiaxin Li ◽  
...  

Abstract Background Single-stage constructed wetlands (CWs) has a single ecological service function and is greatly affected by temperature, which are general in removal of total nitrogen. Multistage hybrid CWs were proven to capable of enhancing removal of nitrogen. Therefore, this study aimed to explore the variation in nitrogen removal in the combined CWs-pond process from summer to winter and the contribution of plant harvesting and the functions of bacteria to nitrogen removal. Methods A pilot-scale multistage constructed wetland-pond system (MCWP) with the process of "the pre-ecological oxidation pond + the two-level horizontal subsurface flow constructed wetland (HSCW) + the surface flow constructed wetland (SFCW) and the submerged plant pond (SPP)" was used to treat actual polluted river water in the field. During the 124 days of operation, the nitrogen concentrations in the units influent and effluent of the system were measured every two days, and the plant height in HSCWs and SFCW was measured once per month. When the system operated stably to the 72nd day, the substrates in the CWs were sampled to analyze the bacterial community structure and composition. Results The concentration of total nitrogen (TN) in the MCWP gradually decreased from 3.46 mg/L to 2.04 mg/L, and the average removal efficiency of TN was approximately 40.74%. The SPP performed the best among all units, and the TN removal efficiency was as high as 16.08%. The TN removal efficiency was significantly positively affected by the daily highest temperature. A formula between the total TN removal efficiency and the highest temperature was obtained by nonlinear fitting. The TN removal load rate in the HSCWs was 2.7–3.7 times that of the SFCW. Furthermore, the TN transformed by Iris pseudacorus L. accounted for 54.53% in the SFCW. Conclusion We found that the significant positive correlation between the daily highest temperature and the total TN removal rate a field MCWP system. The SFCW, as an advanced treatment unit, increased the proportion of nitrogen removed by plant harvesting. The bacteria completed the nitrogen cycle in the SFCW, which had high-density planting, through a variety of nitrogen removal pathways.


2011 ◽  
Vol 221 (1-4) ◽  
pp. 301-312 ◽  
Author(s):  
Michael M. Spacil ◽  
John H. Rodgers ◽  
James W. Castle ◽  
Cynthia L. Murray Gulde ◽  
James E. Myers

Sign in / Sign up

Export Citation Format

Share Document