Variables affecting the yields of methyl esters derived from in situ esterification of rice bran oil

2002 ◽  
Vol 79 (6) ◽  
pp. 611-614 ◽  
Author(s):  
Sevil Özgül-Yücel ◽  
Selma Türkay
Keyword(s):  
Rice Bran ◽  
Rice Bran Oil ◽  
Methyl Esters ◽  
In Situ Esterification

Enhanced Biodiesel and Ethyl Levulinate Production from Rice Bran through Non Catalytic In Situ Transesterification under Subcritical Water Ethanol Mixture

2019 ◽  
Vol 964 ◽  
pp. 97-102
Author(s):  
Siti Zullaikah ◽  
Sri Utami ◽  
Rifky Putra Herminanto ◽  
M. Rachimoellah
Keyword(s):  
Ethyl Acetate ◽  
Rice Bran ◽  
Subcritical Water ◽  
Rice Bran Oil ◽  
Ethyl Esters ◽  
Ethanol Mixture ◽  
Ethyl Levulinate ◽  
Polarity Index ◽  
Transesterification Method

In-situ transesterification method without catalysts to produce biodiesel (fatty acid ethyl esters, FAEE) from rice bran using subcritical water ethanol mixture has been investigated. This method was found to be efficient since the rice bran oil (RBO) extraction and reaction of RBO into FAEE occur simultaneously. In this process other chemical (ethyl levulinate, EL) was also formed along with FAEE. EL can be used to improve the biodiesel quality by improving the low temperature properties of biodiesel. In this study effect of co-solvent types (without co-solvent, ethyl acetate, chloroform, and n-hexane) and water ethanol ratio (20%, 40%, 50%, 60% and 80%, v/v) on the content and yield of FAEE and EL at subcritical water ethanol mixture (T= 160°C, P= 80 bar, and t= 2 h) were investigated systematically. The content and yield of FAEE and EL obtained was found to be affected by the type of co-solvent. The content of FAEE and EL obtained without co-solvent (ethanol and water polarity index were PI=5.2 and PI=10.2, respectively) and with co-solvent of ethyl acetate (PI= 4.4), chloroform (PI= 4.1) and n-hexane (PI= 0.1) were 55.80% and 3.92%, 68.63% and 1.15%, 65.56% and 2.14%, and 62.00% and 0.93%, respectively. Higher polarity index of co-solvent extracted more RBO, as consequent the yield of FAEE (79.79%) obtained was higher using ethyl acetate as co-solvent. This data also suggested that RBO contains more free fatty acids (FFA= 63.59%) rather than of triglycerides (TG= 24.94%).The content and yield of FAEE and EL decreased with increasing water ethanol ratio. The highest content of FAEE (60.57%) and EL (8.48%) and yield of FAEE (78.03%) and EL (10.92%) were obtained using water ethanol ratio of 20%, v/v.

Synthesis of Methyl Ester from Rice Bran Oil through the Esterification Reaction

2020 ◽  
Vol 851 ◽  
pp. 164-171 ◽  
Author(s):  
Aman Santoso ◽  
Abdurrohman ◽  
Anugrah Ricky Wijaya ◽  
Dedek Sukarianingsih ◽  
Sumari ◽  
...  
Keyword(s):  
Refractive Index ◽  
Methyl Ester ◽  
Vegetable Oil ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Methyl Esters ◽  
Acid Number ◽  
Esterification Reaction

Vegetable oil is one of rice bran components. As triglycerides, vegetable oil can be converted to fatty acid and alkyl esters for further treatments. Synthesis of alkyl ester oil can be carried out by esterification or transesterification reaction, depending on the quality of the oil and the catalyst. The purposes of this study are 1) Rice bran oil isolation, 2) Oil esterification 3) Characterization and identification of the methyl ester that compose rice bran oil. The stages in this research are 1) Extraction of rice bran oil, 2) Synthesis of methyl ester from rice bran through esterification reaction, 3) Methyl ester characterization of rice bran oil and its potential test as biodiesel included determination of density, viscosity, refractive index, and acid number test, 4) The identification of synthesized methyl esters composition using GC-MS. The results showed that rice bran oil has a yield of 18.09%. Synthesis of methyl esters from rice bran oil through the esterification reaction with a catalyst acid yields 72.37%. The characters of the synthesized methyl ester are on the range of biodiesel quality standards, namely, the density is 0.850 g/mL, viscosity is 4.73 cSt, a refractive index is 1.45871, and an acid number is 0.76 g KOH/g methyl ester, therefore it is claimed that the synthesized methyl esters have the potential as biodiesel. The GC-MS result showed the presence of compounds methyl tetradecanoate (0.38%), methyl hexadecanoate (40.67%), methyl 9-octadecenoate (53.68%), methyl octadecanoate (5.02%), and methyl eicosanoate (0.14%).

Enhanced Biodiesel and Ethyl Levulinate Production from Rice Bran through Non Catalytic In Situ Transesterification under Subcritical Water Ethanol Mixture

2019 ◽  
Vol 964 ◽  
pp. 234-239
Author(s):  
Siti Zullaikah ◽  
Sri Utami ◽  
Rifky Putra Herminanto ◽  
M. Rachimoellah
Keyword(s):  
Ethyl Acetate ◽  
Rice Bran ◽  
Subcritical Water ◽  
Rice Bran Oil ◽  
Ethyl Esters ◽  
Ethanol Mixture ◽  
Ethyl Levulinate ◽  
Polarity Index ◽  
Transesterification Method

In-situ transesterification method without catalysts to produce biodiesel (fatty acid ethyl esters, FAEE) from rice bran using subcritical water ethanol mixture has been investigated. This method was found to be efficient since the rice bran oil (RBO) extraction and reaction of RBO into FAEE occur simultaneously. In this process other chemical (ethyl levulinate, EL) was also formed along with FAEE. EL can be used to improve the biodiesel quality by improving the low temperature properties of biodiesel. In this study effect of co-solvent types (without co-solvent, ethyl acetate, chloroform, and n-hexane) and water ethanol ratio (20%, 40%, 50%, 60% and 80%, v/v) on the content and yield of FAEE and EL at subcritical water ethanol mixture (T= 160°C, P= 80 bar, and t= 2 h) were investigated systematically. The content and yield of FAEE and EL obtained was found to be affected by the type of co-solvent. The content of FAEE and EL obtained without co-solvent (ethanol and water polarity index were PI=5.2 and PI=10.2, respectively) and with co-solvent of ethyl acetate (PI= 4.4), chloroform (PI= 4.1) and n-hexane (PI= 0.1) were 55.80% and 3.92%, 68.63% and 1.15%, 65.56% and 2.14%, and 62.00% and 0.93%, respectively. Higher polarity index of co-solvent extracted more RBO, as consequent the yield of FAEE (79.79%) obtained was higher using ethyl acetate as co-solvent. This data also suggested that RBO contains more free fatty acids (FFA= 63.59%) rather than of triglycerides (TG= 24.94%). The content and yield of FAEE and EL decreased with increasing water ethanol ratio. The highest content of FAEE (60.57%) and EL (8.48%) and yield of FAEE (78.03%) and EL (10.92%) were obtained using water ethanol ratio of 20%, v/v.

scholarly journals INVESTIGATION ON EFFECT OF MAGNETITE NANOFLUID ON PERFORMANCE AND EMISSION PATTERNS OF METHYL ESTERS OF BIO DIESEL

2016 ◽  
Vol 24 (2) ◽  
pp. 90-96 ◽  
Author(s):  
Yuvarajan D ◽  
Venkata Ramanan M
Keyword(s):  
Rice Bran ◽  
Rice Bran Oil ◽  
Methyl Esters ◽  
Ammonium Hydroxide ◽  
Nano Particles ◽  
Compression Ignition Engine ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Cylinder Compression ◽  
Magnetic Nano Particles

The objective of this work is to reduce viscosity and other related problems associated with biodiesel by adding non polluting additives. Magnetite is chosen as an additive in this work. Significant reason for using magnetite as an additive is that the magnetic nano particles (magnetite) can be collected from exhaust using magnetic billets in the tail pipe. Performance and emission test is carried out in single cylinder compression ignition engine using base and modified fuel and is compared to diesel. Modified fuel consists of 98.5% base fuel (Rice bran oil methyl ester), 1.3% additives (magnetite) and 0.2% surfactant (tri methyl ammonium hydroxide) by volume. The experimental work confirmed that by adding magnetite to methyl esters of rice bran oil enhances the brake thermal efficiency by 4.27% with 5.17% reduction in SFC. In addition, 10.8%, 9.1% and 8.49% reduction in HC, CO and nox emissions is observed respectively.

scholarly journals Produksi Biodiesel dari Dedak Padi dengan Metode In-Situ Dua Tahap Menggunakan Katalis Asam Sulfat dan CaO/Hydrotalcite

2020 ◽  
Vol 11 (3) ◽  
pp. 375-382
Author(s):  
Yustia Wulandari Mirzayanti ◽  
◽  
Ayu Alisa ◽  
Devita Sari
Keyword(s):  
Sulfuric Acid ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Acid Methyl Ester ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Test Results ◽  
Oleic Acid Methyl Ester ◽  
Two Sides

In this study, biodiesel is made from rice bran vegetable oil. Biodiesel production was carried out by the in-situ method using two-sides using sulfuric acid catalysts and CaO/hydrotalcite. The solvent used was methanol as an oil component in the material and a reactant in the formation of FAME and n-hexane as a solvent to increase the yield of rice bran oil extraction. CaO/hydrotalcite to the yield of biodiesel produced and composition of biodiesel at the highest yield. As much as 50 grams of rice bran was put into a three-neck flask, then 50 ml of n-hexane were added. Next, 1 ml mixture of a sulfuric acid catalyst and 250 ml of methanol were added. Then, the mixture was reacted at 65º. Add stirring to 600 rpm for 90 minutes. Reheating after 90 minutes and a sample of 2.5 grams was taken for FFA testing. Next, the CaO/hydrotalcite catalyst in 10 ml of methanol with a mass variation of 1; 1,5; and 2 grams are added to the reaction flask. The mixture was reacted again at a temperature of 65 ºSuitably stirrings 600 rpm for 90 minutes. Based on the BET test results, the CaO/hydrotalcite catalyst surface area was 200.13 m2/g. The best results obtained on CaO/hydrotalcite catalysts were 2 grams with a biodiesel yield of 9.56%. In the highest biodiesel yield, the FAME component is preferred over the oleic acid methyl ester composition with an area of 35.09% at a retention time of 19.14 min.

scholarly journals Technical aspects of biodiesel production from vegetable oils

2008 ◽  
Vol 12 (2) ◽  
pp. 159-169 ◽  
Author(s):  
Janahiraman Krishnakumar ◽  
Karuppannan Venkatachalapathy ◽  
Sellappan Elancheliyan
Keyword(s):  
Methyl Ester ◽  
Vegetable Oil ◽  
Vegetable Oils ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Methyl Esters ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Test Material ◽  
Jatropha Oil

Biodiesel, a promising substitute as an alternative fuel has gained significant attention due to the finite nature of fossil energy sources and does not produce sulfur oxides and minimize the soot particulate in comparison with the existing one from petroleum diesel. The utilization of liquid fuels such as biodiesel produced from vegetable oil by transesterification process represents one of the most promising options for the use of conventional fossil fuels. In the first step of this experimental research, edible rice bran oil used as test material and converted into methyl ester and non-edible jatropha vegetable oil is converted into jatropha oil methyl ester, which are known as biodiesel and they are prepared in the presence of homogeneous acid catalyst and optimized their operating parameters like reaction temperature, quantity of alcohol and the catalyst requirement, stirring rate and time of esterification. In the second step, the physical properties such as density, flash point, kinematic viscosity, cloud point, and pour point were found out for the above vegetable oils and their methyl esters. The same characteristics study was also carried out for the diesel fuel for obtaining the baseline data for analysis. The values obtained from the rice bran oil methyl ester and jatropha oil methyl ester are closely matched with the values of conventional diesel and it can be used in the existing diesel engine without any hardware modification. In the third step the storage characteristics of biodiesel are also studied. .

Sign in / Sign up

Export Citation Format

Share Document