Effect of microencapsulated ammonium polyphosphate on the durability and fire resistance of waterborne intumescent fire-retardant coatings

2018 ◽  
Vol 16 (1) ◽  
pp. 135-145 ◽  
Author(s):  
Zhitian Liu ◽  
Mengqin Dai ◽  
Qinghua Hu ◽  
Shi Liu ◽  
Xiang Gao ◽  
...  
Keyword(s):  
Fire Resistance ◽  
Fire Retardant ◽  
Ammonium Polyphosphate ◽  
Microencapsulated Ammonium Polyphosphate

Design and Properties of Fire-Proof Coating for Tunnels

2007 ◽  
Vol 336-338 ◽  
pp. 1753-1755
Author(s):  
Ya Dong Yao ◽  
Guang Fu Yin ◽  
Xiao Wei Cheng ◽  
Xiang Li Gou
Keyword(s):  
Adhesion Strength ◽  
Magnesium Hydroxide ◽  
Fire Resistance ◽  
Water Resistance ◽  
Fire Retardant ◽  
Ammonium Polyphosphate ◽  
High Alumina ◽  
Experimental Conditions ◽  
Alumina Cement ◽  
High Alumina Cement

Silicate fireproof coatings for tunnels (FCT) have many eminent properties. But low adhesion strength and poor water/fire-resistance of this kind of materials largely limit its applications. Here we reported a new kind of FCT based on high alumina cement as principle adhesive, redispersible powder as assisting adhesive, ammonium polyphosphate as fire-retardant material, vermiculite as adiabatic padding, and magnesium hydroxide as assisting reagents. The influence of various experimental conditions on fire resistance, adhesion strength and water resistance were carefully studied. Results showed that dispersible emulsoid powder was a key component affecting adhesion strength and water resistance of FCT, whereas fire-retardant material posed significant effects on the fire resistance.

Intumescent Type Fire Retardant Epoxy Coating

2020 ◽  
Vol 992 ◽  
pp. 605-609
Author(s):  
L. Pestereva ◽  
N. Shakirov ◽  
Оlga G. Shakirova
Keyword(s):  
Fire Resistance ◽  
Fire Protection ◽  
High Performance ◽  
Fire Retardant ◽  
Epoxy Coating ◽  
Performance Characteristics ◽  
Ammonium Polyphosphate ◽  
Metal Structures ◽  
Intumescent Coatings ◽  
Fire Retardant Properties

This article discusses one of the methods of fire protection, namely, the coating of metal structures with fire retardant paints. Intumescent coatings are currently the most widely used. Fire retardant coatings based on epoxy paints have high performance characteristics and are promising. As the foaming component, the system of ammonium polyphosphate - pentaerythritol - melamine (in a ratio of 2: 1: 1) was selected. The fire retardant properties of the developed material were investigated. Coatings on the base of the developed fire retardant paint allow us to increase own level of fire resistance of metal constructions up to three (90 minutes).

scholarly journals Comparing the effect of nanoclays on the water-resistance of intumescent fire-retardant coatings

2021 ◽  
Vol 3 (6 (111)) ◽  
pp. 59-70
Author(s):  
Liubov Vakhitova ◽  
Kostyantyn Kalafat ◽  
Viktoriia Plavan ◽  
Volodymyr Bessarabov ◽  
Nadezhda Тaran ◽  
...  
Keyword(s):  
Vinyl Acetate ◽  
Fire Resistance ◽  
Water Resistance ◽  
Fire Retardant ◽  
Ethylene Vinyl Acetate ◽  
Ammonium Polyphosphate ◽  
Properties Of Coatings ◽  
Decay Period ◽  
Intumescent Coatings ◽  
Organically Modified

This paper reports a study into the effect of nanoclays on the water-resistance of the intumescent system ammonium polyphosphate/melamine/pentaerythritol/titanium dioxide/polymer (ethylene vinyl acetate (EVA) or styrene acrylate (SA). It has been established that adding nanoclay to a coating based on ethylene vinyl acetate increases the fire resistance limit of a metal plate by 30 %, and to a coating based on styrene acrylate – by 50 %. At the same time, coatings that include the EVA polymer are characterized by greater fire-retardant efficiency and less water resistance than coatings containing the SA polymer. It has been shown that intumescent coatings, regardless of the nature of the polymer, under the conditions of 80 % humidity over 800 days their reduce fire-protective properties by an average of 10 %. The loss of coating fire resistance occurs due to the leaching of pentaerythritol, ammonium polyphosphate, and polymer degradation by hydrolysis. The admixtures of nanoclays with a high degree of exfoliation to the studied system create a barrier effect and maximize the chemical formulation of the intumescent coating. The fireproof properties of coatings with organically-modified montmorillonite admixtures are maintained or reduced to 5 % under the conditions of 80 % humidity over 800 days. It has been determined that the direct effect of water on the coating over a period of more than 2 days leads to a significant decrease in the swelling coefficient of intumescent coatings, regardless of the content of a nanoclay admixture in their composition. At the same time, the half-decay period of coatings without nanoclay, calculated on the basis of solubility constant in water, is 0.5 days. For coatings, which include the admixtures of organically-modified nanoclays, the half-decay period increases to 2 days. The results reported in this paper could be recommended for designing water-proof fire-resistant reactive-type nano-coatings with prolonged service life.

scholarly journals Experimental Study on Delaying the Failure Time of In-Service Cables in Trays by Using Fire-Retardant Coatings

2021 ◽  
Vol 11 (6) ◽  
pp. 2521
Author(s):  
Feng Jiang ◽  
Jianyong Liu ◽  
Wei Yuan ◽  
Jianbo Yan ◽  
Lin Wang ◽  
...  
Keyword(s):  
Fire Resistance ◽  
Failure Time ◽  
Fire Retardant ◽  
Resistance Test ◽  
Control Group ◽  
Engineering Practice ◽  
Standard Fire ◽  
Oil Storage ◽  
Fire Resistance Test ◽  
Test Furnace

Improving the fire resistance of the key cables connected to firefighting and safety equipment is of great importance. Based on the engineering practice of an oil storage company, this study proposes a modification scheme that entails spraying fire-retardant coatings on the outer surface of a cable tray to delay the failure times of the cables in the tray. To verify the effect, 12 specimens were processed using five kinds of fire-retardant coatings and two kinds of fire-resistant cotton to coat the cable tray. The specimens were installed in the vertical fire resistance test furnace. For the ISO 834 standard fire condition, a fire resistance test was carried out on the specimens. The data for the surface temperature and the insulation resistance of the cables in trays were collected, and the fireproof effect was analyzed. The results showed that compared with the control group, the failure time of the cable could be delayed by 1.57–14.86 times, and the thicker the fire-retardant coatings were, the better the fireproof effect was. In general, the fire protection effect of the fire-retardant coating was better than that of the fire-resistant cotton.

Microencapsulated ammonium polyphosphate with boron-modified phenolic resin

2016 ◽  
Vol 133 (30) ◽  
Author(s):  
Weiying Gao ◽  
Shujun Wang ◽  
Fanbin Meng ◽  
Yuanhao Wang ◽  
Huanqing Ma
Keyword(s):  
Phenolic Resin ◽  
Ammonium Polyphosphate ◽  
Microencapsulated Ammonium Polyphosphate

scholarly journals RESEARCH OF FEATURES AND COMPOSITIONS OF VERMICULITE FOR USE AS SUSPENSION FIRE RETARDANT FOR TEXTILE MATERIALS

2020 ◽  
Vol 2020 (2) ◽  
pp. 64-69
Author(s):  
I Khaidarov ◽  
◽  
R Ismailov
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Fire Resistance ◽  
Orthophosphoric Acid ◽  
Fire Retardant ◽  
Physical And Mechanical Properties ◽  
Textile Materials ◽  
Dispersed Particles ◽  
Expanded Vermiculite ◽  
Smoke Generation

This article presents studies of fire resistance in the treatment of expanded vermiculite, which depends on the size of the dispersed particles and the orientation of the granules, their moisture and temperature. It has been studied that one of the interesting and important in practice properties of vermiculite is its ability to swell and turn into a lightweight effective material for imparting fire resistance. The properties and compositions of vermiculite from the Tebinbulak deposit are studied, from which a flame-retardant suspension is prepared for processing textile materials based on vermiculite dissolved in orthophosphoric acid and alkali in an aqueous medium. When modifying materials with developed flame-retardant suspensions, it is possible to obtain fire-resistant textile materials that meet the requirements of GOST for fire resistance, smoke generation and other physical and mechanical properties.

scholarly journals Effect of pre-treatments and additives on the improvement of cement wood composite: A review

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 7288-7308
Author(s):  
Fatima Z. Brahmia ◽  
Péter György Horváth ◽  
Tibor L. Alpár
Keyword(s):  
Fire Resistance ◽  
Construction Material ◽  
National Level ◽  
Fire Retardant ◽  
Wood Composite ◽  
Wood Composites ◽  
Fire Retardants ◽  
Magnesium Compounds ◽  
Pre Treatment ◽  
Manufacturing Time

Cement wood composites (CWC) are a popular construction material. Lightweight or panel-wise wood-based buildings have a growing market in central Europe. Requirements and regulations on both the global and national level are forcing continuous developments. This paper summarizes the research achievements in improving the hygroscopic and mechanical properties and shortening the manufacturing time of CWC via pre-treatments and additives. In addition, new perspectives on enhancing its fire resistance properties by using fire retardant pre-treatments are discussed. CWC without any pre-treatment is a material within the B-s1, d0 category of fire resistance. Using fire retardants could upgrade it to the category A1 but the fire retardants should not affect the primary properties of CWC. There are a number of potential fire retardants of wood that may be used, such as phosphorus, boron, and magnesium compounds.

Sign in / Sign up

Export Citation Format

Share Document