Assumptions Made in Protocols for Shoot Biomass Estimation of Short-Rotation Willow Clones Underlie Differences in Results Between Destructive and Non-destructive Methods

2015 ◽  
Vol 8 (3) ◽  
pp. 1424-1432
Author(s):  
Theo Verwijst ◽  
Johannes Albertsson
2016 ◽  
Vol 54 (2) ◽  
pp. 227-242 ◽  
Author(s):  
CARLOS MANUEL GASPAR REIS ◽  
LUIZ CARLOS GAZARINI ◽  
TERESA FIDALGO FONSECA ◽  
MARIA MARGARIDA RIBEIRO

SUMMARYIn marginal lands Opuntia ficus-indica (OFI) could be used as an alternative fruit and forage crop. The plant vigour and the biomass production were evaluated in Portuguese germplasm (15 individuals from 16 ecotypes) by non-destructive methods, 2 years following planting in a marginal soil and dryland conditions. Two Italian cultivars (Gialla and Bianca) were included in the study for comparison purposes. The biomass production and the plant vigour were estimated by measuring the cladodes number and area, and the fresh (FW) and dry weight (DW) per plant. We selected linear models by using the biometric data from 60 cladodes to predict the cladode area, the FW and the DW per plant. Among ecotypes, significant differences were found in the studied biomass-related parameters and several homogeneous groups were established. Four Portuguese ecotypes had higher biomass production than the others, 3.20 Mg ha−1 on average, a value not significantly different to the improved ‘Gialla’ cultivar, which averaged 3.87 Mg ha−1. Those ecotypes could be used to start a breeding program and to deploy material for animal feeding and fruit production.


2021 ◽  
Vol 11 (7) ◽  
pp. 2979
Author(s):  
Maxime Fortin Faubert ◽  
Dominic Desjardins ◽  
Mohamed Hijri ◽  
Michel Labrecque

The Salix genus includes shrub species that are widely used in phytoremediation and various other phytotechnologies due to their advantageous characteristics, such as a high evapotranspiration (ET) rate, in particular when cultivated in short rotation intensive culture (SRIC). Observations made in past field studies suggest that ET and its impact on soil hydrology can also lead to increases in soil pollutant concentrations near shrubs. To investigate this, sections of a mature willow plantation (seven years old) were cut to eliminate transpiration (Cut treatment). Soil concentrations of polychlorinated biphenyls (PCBs), aliphatic compounds C10–C50, polycyclic aromatic hydrocarbons (PAHs) and five trace elements (Cd, Cr, Cu, Ni and Zn) were compared between the Cut and the uncut plots (Salix miyabeana ‘SX61’). Over 24 months, the results clearly show that removal of the willow shrubs limited the contaminants’ increase in the soil surface, as observed for C10–C50 and of 10 PAHs under the Salix treatment. This finding strongly reinforces a hypothesis that SRIC of willows may facilitate the migration of contaminants towards their roots, thus increasing their concentration in the surrounding soil. Such a “pumping effect” in a high-density willow crop is a prominent characteristic specific to field studies that can lead to counterintuitive results. Although apparent increases of contaminant concentrations contradict the purification benefits usually pursued in phytoremediation, the possibility of active phytoextraction and rhizodegradation is not excluded. Moreover, increases of pollutant concentrations under shrubs following migration suggest that decreases would consequently occur at the source points. Some reflections on interpreting field work results are provided.


2020 ◽  
Vol 3 (1) ◽  
pp. 93
Author(s):  
Iulian Constantin Dănilă

Short rotation forestry (SRF) provides an important supply of biomass for investors in this area. In the NE (North-East) part of Romania at the present time are installed over 800 Ha of this kind of crops. The SRF enjoys the support through environmental policies, in relation to climate change and the provisions of the Kyoto Protocol to reduce the concentration of CO2 in the atmosphere. A precise estimate of biomass production is necessary for the sustainable planning of forest resources and for the exchange of energy in ecosystems. The use of the terrestrial laser scanner (TLS) in estimating the production of above ground wood biomass (AGWB) of short rotation forestry (SRF) brings an important technological leap among indirect (non-destructive) methods. TLS technology is justified when destructive methods become difficult to implement, and allometric equations do not provide accurate information. The main purpose of the research is to estimate the biomass productivity on tree parts in short rotation forestry with TLS technology. Measuring the hybrid poplars crops by TLS may have the following consequences: (1) Higher accuracy of the estimate of biomass production in the SRF; (2) cost and time effective measurements over the biomass of tree parts; (3) new and validated allometric equations for SRF in NE Romania; (4) solid instrument for industry to estimate biomass. TLS technology gives accurate estimates for DBH, tree height and location, as much as the volume on segments, commercial volume or crown volume can be determined. The accuracy of these values depends on the original scan data and their co-registration. The research will contribute to the development of knowledge in the field of hybrid crops.


2021 ◽  
Vol 157 ◽  
pp. 106293
Author(s):  
Huichao Bi ◽  
Claus Erik Weinell ◽  
Raquel Agudo de Pablo ◽  
Benjamín Santos Varela ◽  
Sergio González Carro ◽  
...  

2021 ◽  
Vol 13 (5) ◽  
Author(s):  
Viktória Mozgai ◽  
Bernadett Bajnóczi ◽  
Zoltán May ◽  
Zsolt Mráv

AbstractThis study details the non-destructive chemical analysis of composite silver objects (ewers, situlas, amphora and casket) from one of the most significant late Roman finds, the Seuso Treasure. The Seuso Treasure consists of fourteen large silver vessels that were made in the fourth–early fifth centuries AD and used for dining during festive banquets and for washing and beautification. The measurements were systematically performed along a pre-designed grid at several points using handheld X-ray fluorescence analysis. The results demonstrate that all the objects were made from high-quality silver (above 90 wt% Ag), with the exception of the base of the Geometric Ewer B. Copper was added intentionally to improve the mechanical properties of soft silver. The gold and lead content of the objects shows constant values (less than 1 wt% Au and Pb). The chemical composition as well as the Bi/Pb ratio suggests that the parts of the composite objects were manufactured from different silver ingots. The ewers were constructed in two ways: (i) the base and the body were made separately, or (ii) the ewer was raised from a single silver sheet. The composite objects were assembled using three methods: (i) mechanical attachment; (ii) low-temperature, lead-tin soft solders; or (iii) high-temperature, copper-silver hard solders. Additionally, two types of gilding were revealed by the XRF analysis, one with remnants of mercury, i.e. fire-gilding, and another type without remnants of mercury, presumably diffusion bonding.


2014 ◽  
Vol 606 ◽  
pp. 95-98
Author(s):  
Lukasz Sadowski

Prefabricated power support structure foundations are made in prefabrication plants where concrete is laid in layers in moulds. The quality of the prefabricated units depends mainly on proper concrete mixture compaction, which is usually effected by means of immersion vibrators. It happens that when the vibrator is withdrawn too quickly, defects, in the form of, e.g., air voids and zones of insufficiently vibrated concrete, appear. Modern non-destructive acoustic techniques, which in recent years have been increasingly commonly used in the construction industry, are highly suitable for testing concrete elements, particularly prefabricated concrete units. The non-destructive impact-echo technique is particularly useful for determining defect location depth and for locating defective areas.


Sign in / Sign up

Export Citation Format

Share Document