Pore Analysis and the Behaviour of the Unreacted Metakaolin Particles in the Networks of Geopolymer Cements Using Metakaolins From Kaolinitic and Halloysitic Clays

Silicon ◽  
2021 ◽  
Author(s):  
S. J. K. Melele ◽  
Hervé Kouamo Tchakouté ◽  
C. Banenzoué ◽  
E. L. Hseumou ◽  
C. P. Nanseu-Njiki ◽  
...  
2016 ◽  
Vol 09 (03) ◽  
pp. 1650043 ◽  
Author(s):  
Haolin Wu ◽  
Jie Yang ◽  
Haibiao Chen ◽  
Feng Pan

Preferentially etching either carbon or silica from silicon oxycarbide (SiOC) created a porous network as an inverse image of the removed phase. The porous structure was analyzed by gas adsorption, and the experimental results verified the nanodomain structure of SiOC. This work demonstrated a novel approach for analyzing materials containing nanocomposite structures.


2017 ◽  
Vol 136 ◽  
pp. 30-36 ◽  
Author(s):  
Martin Tetard ◽  
Luc Beaufort ◽  
Laetitia Licari

2015 ◽  
Vol 1 (1) ◽  
Author(s):  
Gretchen S. Selders ◽  
Allison E. Fetz ◽  
Shannon L. Speer ◽  
Gary L. Bowlin

AbstractElectrospinning, a fabrication technique used to create non-woven, porous templates from natural and synthetic polymers, is commonly used in tissue engineering because it is highly tailorable. However, traditional electrospinning creates restrictive pore sizes that limit the required cell migration. Therefore, tissue engineering groups have sought to enhance and regulate porosity of tissue engineering templates. Air-impedance electrospinning generates templates with tailorable, patterned areas of low and high density fiber deposition. Here we demonstrate an improved air-impedance electrospinning system, consisting of a newly designed funnel equipped to hold changeable porous deposition plates and administer air flow in a confined and focused manner, with parameters that maintain template integrity. In this preliminary study, we quantify the increase in porosity of polydioxanone templates with use of traditional fiber and pore analysis as well as with mercury porosimetry. Additionally, we validate the system’s significance in fabricating enhanced porosity templates that maintain their mechanical properties (i.e. elastic modulus, tensile strength, and suture retention strength) despite the deliberate increase in porosity. This is of exceptional value to the template’s integrity and efficacy as these parameters can be further optimized to induce the desired template porosity, strength, and texture for a given application.


2019 ◽  
Vol 54 (8) ◽  
pp. 6053-6065 ◽  
Author(s):  
Heeje Seong ◽  
Seungmok Choi ◽  
Katarzyna E. Matusik ◽  
Alan L. Kastengren ◽  
Christopher F. Powell

2020 ◽  
Vol 8 (1) ◽  
pp. 149-161 ◽  
Author(s):  
H. K. Tchakouté ◽  
D. E. Tchinda Mabah ◽  
C. Henning Rüscher ◽  
E. Kamseu ◽  
F. Andreola ◽  
...  

2018 ◽  
Vol 24 ◽  
pp. 307-315 ◽  
Author(s):  
Göran Flodberg ◽  
Henrik Pettersson ◽  
Li Yang

2017 ◽  
Vol 47 (2) ◽  
pp. 175-187 ◽  
Author(s):  
Anna Pint ◽  
Max Engel ◽  
Sandra Melzer ◽  
Peter Frenzel ◽  
Birgit Plessen ◽  
...  

Abstract The occurrence of athalassic foraminiferal species, along with the brackish-water ostracod Cyprideis torosa, the barnacle Amphibalanus amphitrite, and brackish-water gastropods, prove the existence of a saline lake at Tayma, northern Saudi Arabia, during the early to mid-Holocene. Outcrops at the former shoreline, as well as a single sediment core, allow a reconstruction of the history of the main lake phase. Whereas these outcrops contain masses of calcareous micro- and macrofossils, the core from the modern sabkha does not. Four foraminiferal species were identified: Ammonia tepida is dominant, Quinqueloculina seminula is common, Flintinoides labiosa and Discorinopsis aguayoi are rare. Sieve-pore analysis and shell chemistry of C. torosa, as well as varying but generally high proportions of test anomalies (up to 50%) in foraminifers, indicate fluctuating, mostly hypersaline lacustrine conditions. We suggest, based on these results and on a literature overview on the worldwide distribution of Quaternary athalassic foraminifer taxa, that a combination of low diversity, exclusively marginal marine taxa, combined with occurrences of test anomalies >10% can be used to recognize athalassic saline waters in the fossil record.


Sign in / Sign up

Export Citation Format

Share Document