Iron-aluminum and aluminum-single impregnated biochar composite for nitrate adsorption in rare earth wastewater: behavior and mechanism

This article presents a study of Tomtor rare earth ore decomposition. This material contains a lot of valuable components such as REE and niobium (mas., %: 12,8 ΣREO (rare earth oxides), 0.039 Sc, 18.4 P2O5, 9.9 Fe, 9.0 Al, 0.24 ThO2, 8.2 Nb2O5). The study aims to find efficient ways of processing this deposit. Technologies using the sulfuric acid as the main reagent to leach are described in this article. Investigation has three trends. The first trend is agitation leaching at low sulfuric acid concentrations, temperatures up to 95 °C and atmospheric pressure. The second trend is pressure leaching at low sulfuric acid concentrations, high temperatures (up to 180 °C) and high pressure. The third trend is high temperature sulfatization with concentrated sulfuric acid at elevated temperature (up to 180 °C) and atmospheric pressure followed by aqueous leaching. The dependence of target components (rare earth elements, scandium, phosphorus) and the impurity (iron, aluminum, thorium) extractions into solution from major factors was studied.

Download Full-text

ChemInform Abstract: Structural and Magnetic Order of ThMn12-type Rare Earth-Iron-Aluminum Intermetallics Studied by Neutron Diffraction

ChemInform ◽

10.1002/chin.200016267 ◽

2010 ◽

Vol 31 (16) ◽

pp. no-no

Author(s):

W. Schafer ◽

W. Kockelmann ◽

I. Halevy ◽

J. Gal

Keyword(s):

Rare Earth ◽

Neutron Diffraction ◽

Magnetic Order ◽

Iron Aluminum

Download Full-text

Recycling Red Mud of JSC Ural Aluminum Plant with the Recovery of Iron and Construction Materials

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.743.331 ◽

2017 ◽

Vol 743 ◽

pp. 331-337 ◽

Cited By ~ 2

Author(s):

Dmitry Zinoveev ◽

Pavel Grudinsky ◽

Vladimir Korneev ◽

Valery Dyubanov ◽

Mark Zheleznyi

Keyword(s):

Rare Earth ◽

Construction Industry ◽

Red Mud ◽

Rare Earth Metals ◽

Construction Materials ◽

Pig Iron ◽

Iron Aluminum ◽

Landfill Sites ◽

Reduction Smelting ◽

Alumina Industry

Red mud is a by-product of alumina industry which is currently almost completely stored in landfill sites without further use. It contains considerable amounts of valuable components such as iron, aluminum, titanium and rare-earth metals. The reduction smelting of red mud was carried out in laboratory scale to recover iron and obtain slag suitable for use in the construction industry. It has been shown that it is expedient to obtain pig iron and slag from the unprocessed red mud. Those two are suitable for the subsequent leaching of aluminum, titanium and rare-earth metals. It is practical to process dealkalized red mud, with composition adjustment by CaO and Al2O3 addition, in order to obtain pig iron and slag in the form of aluminous clinker.

Download Full-text

Characterization of Rare-Earth Fluoride Anti-Stokes Phosphors by Scanning arid Transmission Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100064761 ◽

1971 ◽

Vol 29 ◽

pp. 142-143

Author(s):

N. M. P. Low ◽

L. E. Brosselard

Keyword(s):

Electron Microscopy ◽

Rare Earth ◽

Elevated Temperatures ◽

Stoichiometric Composition ◽

Rare Earth Ions ◽

Crystalline Solid ◽

Precipitation Process ◽

Rare Earth Fluoride ◽

Earth Fluoride ◽

Rare Earth Fluorides

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.

Download Full-text

Study of segregation in La1.8Sr0.2CuO4 superconductor by STEM-EDS microanalysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100125294 ◽

1987 ◽

Vol 45 ◽

pp. 54-55

Author(s):

T. F. Kelly ◽

P. J. Lee ◽

E. E. Hellstrom ◽

D. C. Larbalestier

Keyword(s):

Rare Earth ◽

High Field ◽

Transport Current ◽

Total Thickness ◽

New Class ◽

Ceramic Superconductors ◽

Current Densities ◽

Group Ii ◽

Eds Microanalysis

Recently there has been much excitement over a new class of high Tc (>30 K) ceramic superconductors of the form A1-xBxCuO4-x, where A is a rare earth and B is from Group II. Unfortunately these materials have only been able to support small transport current densities 1-10 A/cm2. It is very desirable to increase these values by 2 to 3 orders of magnitude for useful high field applications. The reason for these small transport currents is as yet unknown. Evidence has, however, been presented for superconducting clusters on a 50-100 nm scale and on a 1-3 μm scale. We therefore planned a detailed TEM and STEM microanalysis study in order to see whether any evidence for the clusters could be seen.A La1.8Sr0.2Cu04 pellet was cut into 1 mm thick slices from which 3 mm discs were cut. The discs were subsequently mechanically ground to 100 μm total thickness and dimpled to 20 μm thickness at the center.

Download Full-text

Microstructural characterization of a cast RENi5-based alloy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151714 ◽

1993 ◽

Vol 51 ◽

pp. 1176-1177

Author(s):

G. M. Micha ◽

L. Zhang

Keyword(s):

Electron Microscopy ◽

Rare Earth ◽

Microstructural Characterization ◽

Binary Compound ◽

Nickel Metal ◽

Cast Material ◽

Nickel Metal Hydride ◽

Transmission Electron ◽

Cast Condition

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.

Download Full-text

Interfacial structures of dissimilar materials joined by capacitor-discharge welding

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100170402 ◽

1994 ◽

Vol 52 ◽

pp. 534-535

Author(s):

C. P. Doğan ◽

R. D. Wilson ◽

J. A. Hawk

Keyword(s):

Rapid Solidification ◽

Fusion Zone ◽

Dissimilar Materials ◽

Solidification Process ◽

Weld Interface ◽

Capacitor Discharge ◽

Fine Grained ◽

Iron Aluminum ◽

Conductive Ceramics ◽

Capacitor Discharge Welding

Capacitor Discharge Welding is a rapid solidification technique for joining conductive materials that results in a narrow fusion zone and almost no heat affected zone. As a result, the microstructures and properties of the bulk materials are essentially continuous across the weld interface. During the joining process, one of the materials to be joined acts as the anode and the other acts as the cathode. The anode and cathode are brought together with a concomitant discharge of a capacitor bank, creating an arc which melts the materials at the joining surfaces and welds them together (Fig. 1). As the electrodes impact, the arc is extinguished, and the molten interface cools at rates that can exceed 106 K/s. This process results in reduced porosity in the fusion zone, a fine-grained weldment, and a reduced tendency for hot cracking.At the U.S. Bureau of Mines, we are currently examining the possibilities of using capacitor discharge welding to join dissimilar metals, metals to intermetallics, and metals to conductive ceramics. In this particular study, we will examine the microstructural characteristics of iron-aluminum welds in detail, focussing our attention primarily on interfaces produced during the rapid solidification process.

Download Full-text