Hyperbolic Cosine Rayleigh Distribution and Its Application to Breaking Stress of Carbon Fibers

2020 ◽  
Vol 21 (2) ◽  
pp. 471-485
Author(s):  
K. M. Sakthivel ◽  
J. Rajkumar
Keyword(s):  
Carbon Fibers ◽  
Rayleigh Distribution ◽  
Breaking Stress ◽  
Hyperbolic Cosine

scholarly journals Acceptance Sampling Plans from Life Tests Based on Percentiles of New Weibull–Pareto Distribution with Application to Breaking Stress of Carbon Fibers Data

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 2041
Author(s):  
Mansour Shrahili ◽  
Amer I. Al-Omari ◽  
Naif Alotaibi
Keyword(s):  
Carbon Fibers ◽  
Pareto Distribution ◽  
Real Data ◽  
Breaking Stress ◽  
Acceptance Sampling ◽  
Data Set ◽  
Sampling Plans ◽  
Operating Characteristic Function ◽  
Acceptance Sampling Plans ◽  
Life Tests

In this paper, acceptance sampling plans (ASPs) are proposed for the new Weibull-Pareto distribution (NWPD) percentiles assuming truncated life tests at a pre-determined time. The minimum sample sizes essential to assert the specified percentile are calculated for a given consumer’s risk. The operating characteristic function values of the developed ASPs and producer’s risk are provided. A real data set related to the breaking stress of carbon fibers data are presented for illustration.

Estimation of Stress–Strength Reliability from Exponentiated Inverse Rayleigh Distribution

2019 ◽  
Vol 26 (01) ◽  
pp. 1950005 ◽  
Author(s):  
G. Srinivasa Rao ◽  
Sauda Mbwambo ◽  
P. K. Josephat
Keyword(s):  
Carbon Fibers ◽  
Mean Squared Error ◽  
Scale Parameter ◽  
Average Length ◽  
Rayleigh Distribution ◽  
Squared Error ◽  
Coverage Probabilities ◽  
Common Scale ◽  
Asymptotic Confidence Intervals ◽  
The Mean

This paper considers the estimation of stress–strength reliability when two independent exponential inverse Rayleigh distributions with different shape parameters and common scale parameter. The maximum likelihood estimator (MLE) of the reliability, its asymptotic distribution and asymptotic confidence intervals are constructed. Comparisons of the performance of the estimators are carried out using Monte Carlo simulations, the mean squared error (MSE), bias, average length and coverage probabilities. Finally, a demonstration is delivered on how the proposed reliability model may be applied in data analysis of the strength data for single carbon fibers test data.

EXELFS Studies of Carbon Fibers

1990 ◽  
Vol 48 (2) ◽  
pp. 72-73
Author(s):  
V. Serin ◽  
K. Hssein ◽  
G. Zanchi ◽  
J. Sévely
Keyword(s):  
Carbon Fibers ◽  
Energy Analysis ◽  
Electron Excitation ◽  
Complex Structures ◽  
High Modulus ◽  
Promising Technique ◽  
X Ray ◽  
Fine Structures ◽  
X Ray Absorption

The present developments of electron energy analysis in the microscopes by E.E.L.S. allow an accurate recording of the spectra and of their different complex structures associated with the inner shell electron excitation by the incident electrons (1). Among these structures, the Extended Energy Loss Fine Structures (EXELFS) are of particular interest. They are equivalent to the well known EXAFS oscillations in X-ray absorption spectroscopy. Due to the EELS characteristic, the Fourier analysis of EXELFS oscillations appears as a promising technique for the characterization of composite materials, the major constituents of which are low Z elements. Using EXELFS, we have developed a microstructural study of carbon fibers. This analysis concerns the carbon K edge, which appears in the spectra at 285 eV. The purpose of the paper is to compare the local short range order, determined by this way in the case of Courtauld HTS and P100 ex-polyacrylonitrile carbon fibers, which are high tensile strength (HTS) and high modulus (HM) fibers respectively.

Coating of continuous carbon fibers with double layers by chemical vapor deposition

2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-885-Pr3-892 ◽  
Author(s):  
N. Popovska ◽  
S. Schmidt ◽  
E. Edelmann ◽  
V. K. Wunder ◽  
H. Gerhard ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Carbon Fibers ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Double Layers

RELIABILITY TEST PLANS BASED ON EXPONENTIATED RAYLEIGH DISTRIBUTION

2018 ◽  
Vol 43 (1) ◽  
pp. 89-100
Author(s):  
B. SRIRAM ◽  
◽  
R.R.L. KANTAM ◽  
Keyword(s):  
Rayleigh Distribution ◽  
Reliability Test

Morphology and properties of PA6 hybrid composites filled with short carbon fibers and organoclay

2016 ◽  
Vol 2 (3) ◽  
pp. 47-57 ◽  
Author(s):  
S.S. Pesetskii ◽  
S.P. Bogdanovich ◽  
V.V. Dubrovskii ◽  
T.M. Sodyleva ◽  
V.N. Aderikha ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composites ◽  
Short Carbon

Influence of carbon fibers and tungsten disulfide on the properties and structure of polytetrafluoroethylene

2018 ◽  
Vol 4 (3) ◽  
pp. 26-34
Author(s):  
A. A. Okhlopkova ◽  
A. P., Vasilev ◽  
T. S. Struchkova ◽  
A. G. Alekseev ◽  
P. N. Grakovich
Keyword(s):  
Carbon Fibers ◽  
Tungsten Disulfide ◽  
And Tungsten

Microwave Absorbing Properties of Carbon Fibers Modified with BN/SiC Composite Coatings

2014 ◽  
Vol 29 (10) ◽  
pp. 1093 ◽  
Author(s):  
ZHOU Wei ◽  
XIAO Peng ◽  
LI Yang ◽  
LUO Heng ◽  
HONG Wen
Keyword(s):  
Carbon Fibers ◽  
Composite Coatings ◽  
Microwave Absorbing Properties ◽  
Microwave Absorbing

Cytocompatibility of Carbon Nanofiber Materials for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Carbon Fiber ◽  
Surface Energy ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Fiber Composite ◽  
Scar Tissue ◽  
Pc 12 Cells ◽  
Low Surface Energy ◽  
Poly Carbonate

AbstractSince the cytocompatibility of carbon nanofibers with respect to neural applications remains largely uninvestigated, the objective of the present in vitro study was to determine cytocompatibility properties of formulations containing carbon nanofibers. Carbon fiber substrates were prepared from four different types of carbon fibers, two with nanoscale diameters (nanophase, or less than or equal to 100 nm) and two with conventional diameters (or greater than 200 nm). Within these two categories, both a high and a low surface energy fiber were investigated and tested. Astrocytes (glial scar tissue-forming cells) and pheochromocytoma cells (PC-12; neuronal-like cells) were seeded separately onto the substrates. Results provided the first evidence that astrocytes preferentially adhered on the carbon fiber that had the largest diameter and the lowest surface energy. PC-12 cells exhibited the most neurites on the carbon fiber with nanodimensions and low surface energy. These results may indicate that PC-12 cells prefer nanoscale carbon fibers while astrocytes prefer conventional scale fibers. A composite was formed from poly-carbonate urethane and the 60 nm carbon fiber. Composite substrates were thus formed using different weight percentages of this fiber in the polymer matrix. Increased astrocyte adherence and PC-12 neurite density corresponded to decreasing amounts of the carbon nanofibers in the poly-carbonate urethane matrices. Controlling carbon fiber diameter may be an approach for increasing implant contact with neurons and decreasing scar tissue formation.

Sign in / Sign up

Export Citation Format

Share Document