Intra-beam scattering and beam lifetime in a candidate lattice of the soft X-ray diffraction-limited storage ring for the upgraded SSRF

2021 ◽  
Vol 32 (8) ◽  
Author(s):  
Xin-Zhong Liu ◽  
Shun-Qiang Tian ◽  
Xu Wu ◽  
Meng Wang ◽  
Zhen-Tang Zhao
2022 ◽  
Vol 17 (01) ◽  
pp. P01001
Author(s):  
J. Xu ◽  
Z. Ren ◽  
P. Yang ◽  
G. Liu ◽  
Z. Bai

Abstract The Hefei Advanced Light Facility (HALF) is a soft X-ray diffraction-limited storage ring being designed with an energy of about 2.2 GeV and an emittance goal of less than 100 pm·rad. The present HALF lattice is a modified hybrid six-bend-achromat (6BA) lattice with a long and a short straight section in each cell. In this paper, a 7BA lattice is designed for HALF as a promising option, which follows the main feature of hybrid 7BA lattice, but to have a compact configuration and lower emittance, all bends in this lattice are combined-function bends and reverse bends. The designed HALF storage ring has a circumference of 388.8 m and 20 identical cells. Two solutions with different betatron tunes are studied for this lattice. One with smaller tunes has better nonlinear dynamics performance allowing for off-axis injection, which has a natural emittance of 67 pm·rad. The other with larger tunes has very small beta functions at the straight section as well as lower natural emittance of 59 pm·rad, which can enhance the brightness of insertion device (ID) radiation. The intra-beam scattering effect and ID radiation properties are also presented in this paper.


2021 ◽  
Vol 28 (3) ◽  
Author(s):  
Matthias Rössle ◽  
Wolfram Leitenberger ◽  
Matthias Reinhardt ◽  
Azize Koç ◽  
Jan Pudell ◽  
...  

The time-resolved hard X-ray diffraction endstation KMC-3 XPP for optical pump/X-ray probe experiments at the electron storage ring BESSY II is dedicated to investigating the structural response of thin film samples and heterostructures after their excitation with ultrashort laser pulses and/or electric field pulses. It enables experiments with access to symmetric and asymmetric Bragg reflections via a four-circle diffractometer and it is possible to keep the sample in high vacuum and vary the sample temperature between ∼15 K and 350 K. The femtosecond laser system permanently installed at the beamline allows for optical excitation of the sample at 1028 nm. A non-linear optical setup enables the sample excitation also at 514 nm and 343 nm. A time-resolution of 17 ps is achieved with the `low-α' operation mode of the storage ring and an electronic variation of the delay between optical pump and hard X-ray probe pulse conveniently accesses picosecond to microsecond timescales. Direct time-resolved detection of the diffracted hard X-ray synchrotron pulses use a gated area pixel detector or a fast point detector in single photon counting mode. The range of experiments that are reliably conducted at the endstation and that detect structural dynamics of samples excited by laser pulses or electric fields are presented.


2012 ◽  
Vol 57 (3) ◽  
pp. 463-470
Author(s):  
D. S. Molodenskii ◽  
D. M. Kheiker ◽  
V. N. Korchuganov ◽  
E. E. Konoplev ◽  
P. V. Dorovatovskii

Author(s):  
Keith Moffat

A personal, historical view is presented of Laue X-ray diffraction and its application to time-resolved studies of dynamic processes, largely in light-sensitive biological systems. In Laue diffraction, a stationary crystal is illuminated by a polychromatic X-ray source. Laue diffraction has inherent complications largely absent in monochromatic diffraction, and consequently fell into disuse for quantitative structure determination. However, the advent of naturally polychromatic, intense, pulsed storage ring X-ray sources in the 1970s led to re-examination at Daresbury and elsewhere of its underlying principles. Laue diffraction has been successfully applied at storage ring sources to time-resolved, pump–probe crystallographic studies, whose exposure time and time resolution were progressively reduced from minutes to seconds, milliseconds, nanoseconds and 100 ps. Most recently, hard X-ray free electron laser sources have been used to generate narrow bandpass Laue diffraction patterns. The femtosecond X-ray pulses from such sources are completely destructive, generate only one diffraction pattern per tiny crystal and have unusual properties. However, they too are being applied to time-resolved crystallography to explore, for example, isomerization and rapid tertiary structural changes on the chemical, femtosecond timescale. This article is part of the theme issue ‘Fifty years of synchrotron science: achievements and opportunities’.


2010 ◽  
Vol 55 (5) ◽  
pp. 901-906 ◽  
Author(s):  
D. M. Kheĭker ◽  
E. E. Konoplev ◽  
D. S. Molodenskiĭ ◽  
V. A. Shishkov ◽  
P. V. Dorovatovskiĭ

Author(s):  
R. E. Herfert

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.


Author(s):  
James A. Lake

The understanding of ribosome structure has advanced considerably in the last several years. Biochemists have characterized the constituent proteins and rRNA's of ribosomes. Complete sequences have been determined for some ribosomal proteins and specific antibodies have been prepared against all E. coli small subunit proteins. In addition, a number of naturally occuring systems of three dimensional ribosome crystals which are suitable for structural studies have been observed in eukaryotes. Although the crystals are, in general, too small for X-ray diffraction, their size is ideal for electron microscopy.


Author(s):  
C. Wolpers ◽  
R. Blaschke

Scanning microscopy was used to study the surface of human gallstones and the surface of fractures. The specimens were obtained by operation, washed with water, dried at room temperature and shadowcasted with carbon and aluminum. Most of the specimens belong to patients from a series of X-ray follow-up study, examined during the last twenty years. So it was possible to evaluate approximately the age of these gallstones and to get information on the intensity of growing and solving.Cholesterol, a group of bile pigment substances and different salts of calcium, are the main components of human gallstones. By X-ray diffraction technique, infra-red spectroscopy and by chemical analysis it was demonstrated that all three components can be found in any gallstone. In the presence of water cholesterol crystallizes in pane-like plates of the triclinic crystal system.


Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.


Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.


Sign in / Sign up

Export Citation Format

Share Document