Residual oil hydrodesulfurization using dispersed catalysts in a carbon-packed trickle bed flow reactor

1995 ◽  
Vol 36 (3) ◽  
pp. 180
Keyword(s):  
Flow Reactor ◽  
Residual Oil ◽  
Dispersed Catalysts ◽  
Trickle Bed

Residual Oil Hydrodesulfurization Using Dispersed Catalysts in a Carbon-Packed Trickle Bed Flow Reactor

1995 ◽  
Vol 9 (1) ◽  
pp. 2-9 ◽  
Author(s):  
Deuk Ki Lee ◽  
Park Sung Koon ◽  
Wang Lai Yoon ◽  
In Chul Lee ◽  
Seong Ihl Woo
Keyword(s):  
Flow Reactor ◽  
Residual Oil ◽  
Dispersed Catalysts ◽  
Trickle Bed

Modeling the hydrotreating reactions of a heavy residual oil in a pilot trickle-bed reactor

1985 ◽  
Vol 24 (3) ◽  
pp. 531-537 ◽  
Author(s):  
Antonio Iannibello ◽  
Sergio Marengo ◽  
Gerlando Burgio ◽  
Giancarlo Baldi ◽  
Silvio Sicardi ◽  
...  
Keyword(s):  
Residual Oil ◽  
Trickle Bed Reactor ◽  
Trickle Bed

Hydrogenolysis of glucose and fructose in glycol solutions over CuO-MgO-ZrO2 catalyst

2020 ◽  
pp. 48-55
Author(s):  
M.E. Sharanda ◽  
◽  
E.A. Bondarenko ◽  
Keyword(s):  
Ethylene Glycol ◽  
Propylene Glycol ◽  
Flow Reactor ◽  
General Trend ◽  
Raw Materials ◽  
Reaction Products ◽  
Renewable Raw Materials ◽  
High Partial Pressure ◽  
Zro2 Catalyst ◽  
Phase Process

Ethylene glycol and propylene glycol are important representatives of polyols. On an industrial scale, they are obtained from petrochemical raw materials. Within a decade, significant efforts were made for the producing of polyols from biologically renewable raw materials - carbohydrates. The general trend for carbohydrate hydrogenolysis includes application of liquid-phase process with the use of modified metal-oxide catalysts, at 120-120 ° C and pressure of 3MPa or above. So high pressure is used for the reason to increase hydrogen solubility, and also due to the high partial pressure of low boiling solvents. We supposed that usage of high boiling solvents could allow hydrogenolysis to be performed at the lower pressure. Ethylene glycol and propylene glycol are of particular interest as such kind of solvent since they are both the main products of glucose hydrogenolysis. In this work, the process of hydrogenolysis of glucose and fructose over Cu / MgO-ZrO2 catalyst have been studied at temperature range of 160-200 °C and a pressure of 0.1-0.3 MPa in a flow reactor. The solvents were simultaneously the target products of the reaction - ethylene glycol and / or propylene glycol. Gas chromatography and 13C NMR were used for the reaction products identification. It was found that the solubility of glucose in propylene glycol is 21 % by weight, and in ethylene glycol 62% by weight. It was pointed out that the process of hydrogenolysis can take place at a pressure close to atmospheric. Under these conditions, the conversion of hexoses reaches 96-100 %. The reaction products are preferably propylene glycol and ethylene glycol. The total selectivity for C3-2 polyols is 90-94 %, that is higher than in the hydrogenolysis of glucose in aqueous solution.

Conversion of fructose into methyl lactate over SnO2/Al2O3 catalystin flow regime

2020 ◽  
pp. 43-47
Author(s):  
S.V. Prudius ◽  
◽  
N.L. Hes ◽  
A.M. Mylin ◽  
V.V. Brei ◽  
...  
Keyword(s):  
Flow Reactor ◽  
Practical Interest ◽  
Dimethyl Acetal ◽  
Racemic Mixture ◽  
Process Conditions ◽  
Impregnation Method ◽  
Aqueous Methanol ◽  
Methyl Lactate ◽  
Al2o3 Catalyst ◽  
Target Reaction

In recent years, numerous researchers have focused on the development of catalytic methods for processing of biomass-derived sugars into alkyl lactates, which are widely used as non-toxic solvents and are the starting material for obtaining monomeric lactide. In this work, the transformation of fructose into methyl lactate on Sn-containing catalyst in the flow reactor that may be of practical interest was studied. The supported Sn-containing catalyst was ob-tained by a simple impregnation method of granular γ-Al2O3. The catalytic ex-periments were performed in a flow reactor at temperatures of 160-190 °C and pressure of 3.0 MPa. The 1.6-9.5 wt.% fructose solutions in 80% aqueous methanol were used as a reaction mixture. It was found that addition to a reac-tion mixture of 0.03 wt.% potassium carbonate leads to the increase in selec-tivity towards methyl lactate on 15% at 100% conversion of fructose. Prod-ucts of the target reaction С6Н12О6 + 2СН3ОН = 2С4Н8О3 + 2Н2О were ana-lyzed using 13C NMR method. The following process conditions for obtaining of 65 mol% methyl lactate yield at 100% fructose conversion were found: use of 4.8 wt.% fructose solution in 80% methanol, 180 °С, 3.0 МПа and a load on catalyst 1.5 mmol C6H12O6/mlcat/h at contact time of 11 minutes. The cata-lyst productivity is 2.0 mmol C4H8O3/mlcat/h and the by-productі are 1,3-dihydroxyacetone dimethyl acetal (20%) and 5-hydroxymethylfurfural (10%). It should be noted that a racemic mixture of L- and D-methyl lactates has been obtained by conversion of D-fructose on the SnO2/Al2O3 catalyst. The SnO2/Al2O3 catalyst was found to be stable for 6 h while maintaining full fruc-tose conversion at 55–70% methyl lactate selectivity. After regeneration the catalyst completely restores the initial activity.

Droplet Factories: Synthesis and Assembly of Silver and Palladium Nanoparticles at the Liquid-Liquid Interface

2019 ◽  
Author(s):  
Suchanuch Sachdev ◽  
Rhushabh Maugi ◽  
Sam Davis ◽  
Scott Doak ◽  
Zhaoxia Zhou ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Reaction Rate ◽  
Tertiary Structure ◽  
Flow Reactor ◽  
Pd Nanoparticles ◽  
Subsequent Removal ◽  
Immiscible Liquids ◽  
Flow Reactors ◽  
Droplet Flow ◽  
One Step

<div>The interface between two immiscible liquids represent an ideal substrate for the assembly of nanomaterials. The defect free surface provides a reproducible support for creating densely packed ordered materials. Here a droplet flow reactor is presented for the synthesis and/ or assembly of nanomaterials at the interface of the emulsion. Each droplet acts as microreactor for a reaction between decamethylferrocene (DmFc) within the hexane and metal salts (Ag+/ Pd2+) in the aqueous phase. The hypothesis was that a spontaneous, interfacial reaction would lead to the assembly of nanomaterials creating a Pickering emulsion. The subsequent removal of the solvents showed how the Ag nanoparticles were trapped at the interface and retain the shape of the droplet, however the Pd nanoparticles were dispersed with no tertiary structure. To further exploit this, a one-step process where the particles are synthesised and then assembled into core-shell materials was proposed. The same reactions were performed in the presence of oleic acid stabilise Iron oxide nanoparticles dispersed within the hexane. It was shown that by changing the reaction rate and ratio between palladium and iron oxide a continuous coating of palladium onto iron oxide microspheres can be created. The same reaction with silver, was unsuccessful and resulted in the silver particles being shed into solution, or incorporated within the iron oxide micro particle. These insights offer a new method and chemistry within flow reactors for the creation of palladium and silver nanoparticles. We use the technique to create metal coated iron oxide nanomaterials but the methodology could be easily transferred to the assembly of other materials.</div><div><br></div>

Sign in / Sign up

Export Citation Format

Share Document