090 Integrated validation of man machine interface and control system for a combined cycles plant

1993 ◽  
Vol 1 (3) ◽  
pp. 558
Keyword(s):  
Control System ◽  
Combined Cycles ◽  
Machine Interface ◽  
Man Machine Interface ◽  
And Control

Integrated Validation of Man Machine Interface and Control System for a Combined Cycles Plant

1992 ◽  
Vol 25 (1) ◽  
pp. 235-238
Author(s):  
E. Colozza ◽  
P. Groppelli ◽  
M. Maini ◽  
A. Scianna
Keyword(s):  
Control System ◽  
Combined Cycles ◽  
Machine Interface ◽  
Man Machine Interface ◽  
And Control

Design of the Visualization Automatic Control System on the LPG Shuttle Kiln

2013 ◽  
Vol 670 ◽  
pp. 26-30
Author(s):  
X.J. Wang ◽  
X.G. Fu
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Control Strategy ◽  
Visualization System ◽  
Temperature Transducer ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Intelligence Control ◽  
And Control

By the design of the visualization system of the LPG shuttle kiln, the friendly man-machine interface is achieved, which is helpful for the change, expansion and upgrade of the system. It is studied that the general schemes of the visualization automatic control system of the LPG shuttle kiln in this article. The choice of the hardware devices, especially the system nucleus units including temperature transducer, A/D or D/A intelligent module, RS232/485 converter, relay, actuator, etc, and the connection and control strategy of the hardware of the control system, is analyzed emphatically. A/D or D/A intelligence module, RS232/485 converter, relay, actuator, the joint and control strategy of the hardware of the control system, etc. With the widely application of the intelligence control system, the foreground of the visualization system of the shuttle kiln will be better and better.

Micro-Anode Guided Electroplating (MAGE) Control System

2006 ◽  
Vol 505-507 ◽  
pp. 115-120
Author(s):  
Dong Liang Lee ◽  
Jui Chang Lin ◽  
P.F. Kao ◽  
S.B. Jiang
Keyword(s):  
Control System ◽  
Surface Morphology ◽  
Measurement System ◽  
System Architecture ◽  
Power Source ◽  
Source Control ◽  
Equipment Development ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Control System Architecture

This article releases the details of the equipment development for the micro-anode guided electroplating MAGE fabrication. The microstepping architecture, electroplating power source, control system architecture, measurement system, man machine interface and the control prodedure will be described. Metallic columns around 100 micrometers in diameter were fabricated up to 2cm long with this equipment to demonstrate its performance. An innovative intermittent MAGE mode is supported by this equipment so that it can produce micro columns of finer surface morphology and better circumferential uniformity than the conventional continuous electroplating.

scholarly journals Research and development of Q-Baller -- a spherical wheeled robot

2017 ◽  
Author(s):  
◽  
Jiamin Wang
Keyword(s):  
Control System ◽  
Dynamic Models ◽  
Circuit Board ◽  
Embedded Control ◽  
Wheeled Robot ◽  
Dynamics And Control ◽  
Continuous Gain Scheduling ◽  
Machine Interface ◽  
And Control ◽  
And Robotics

The Spherical Wheeled Robot (Ball-Bot) is a family of robots that can maintain balance standing on a ball and use it as its wheel to move around. In recent years, there have been several successful Ball-Bot designs. We attempt to develop a new spherical wheeled robot product named "Q-Baller" to study its dynamics and control system. The Q-Baller has been designed to ahieve the economic and effective prototyping. A detailed dynamic model of the mechatronic system has been established and analyzed. Control studies have been conducted based on the dynamic models, and new control methods has been proposed to realize continuous gain scheduling. Exclusive simulations have been performed to test the performance of the controllers and reference planning. The Q-Baller hardware has been prototyped and functional. Robotic circuit board, human machine interface and embedded control system have also been developed to make up the full robotic system. The Q-Baller prototype will be tested after the system is fully adjusted, and further researches in control and robotics will be conducted in the future.

Research and Development of Automatic Control System on Material Split Packing and Packaging Integrated Machine

2014 ◽  
Vol 533 ◽  
pp. 294-297
Author(s):  
Kai Yang ◽  
Zhong Shen Li ◽  
Lei Zhang
Keyword(s):  
Control System ◽  
High Speed ◽  
High Reliability ◽  
Automatic Measurement ◽  
Power Module ◽  
Memory Module ◽  
Machine Interface ◽  
Output Driver ◽  
And Control ◽  
Measurement And Control

In order to meet the high speed, high precision, high reliability of the packaging machine, a novel control system is provided. In the hardware, the main circuits consisted of main processor module, memory module, temperature measurement and control module, input signal detection module, material split packing module, output driver module, human-machine interface module, system monitor module, power module and JTAG debug module, etc. In the software, the multi-tasking operating system μC/OS-Ⅱ and the graphical user interface μC/GUI were successfully transplanted into LPC2478. Then an experimental platform was established. And many control tasks, including automatic measurement, making bags, loading, transferring, pumping vacuum, sealing and data display, were automatically and continuously executed on the platform. Finally the results show: the machine can package 30 packets (5 g per packet) in a minute; the packaging errors ≤ 0.2 g; the packaging qualified rates ≥ 93%. In conclusion, the system performance is good.

The development of a graphical man-machine interface for computer-aided control system design

1986 ◽  
Vol 18 (7) ◽  
pp. 395 ◽  
Author(s):  
H.A. Barker ◽  
M. Chen ◽  
P.W. Grant ◽  
C.P. Jobling ◽  
P. Townsend
Keyword(s):  
Control System ◽  
System Design ◽  
Control System Design ◽  
Computer Aided ◽  
Machine Interface ◽  
Man Machine Interface

The Design of Temperature Control System in Climatic Chamber Based on PLC and PC

2011 ◽  
Vol 148-149 ◽  
pp. 413-417
Author(s):  
Jia Jiang Yu ◽  
Sa Wu
Keyword(s):  
Control System ◽  
Pid Control ◽  
Temperature Tolerance ◽  
Protocol Design ◽  
Temperature Control System ◽  
Test Design ◽  
Climatic Chamber ◽  
Environmental Test ◽  
Machine Interface ◽  
And Control

In allusion to climatic chamber which is the important device in reliability and environmental test, design a control system including S7-200 PLC and PC to realize conventional PID control. To obtain more precise test temperature goal, a setting of temperature tolerance belt is imported. And introduce SIMATIC S7-200 PLC communication protocol, design a PC human-machine interface based on VC++, use a ActiveX control named MSComm6.0 to realize data recording and control between PC and PLC.

Sign in / Sign up

Export Citation Format

Share Document