RESISTANCE NETWORK ANALOGUE METHOD FOR TWO-DIMENSIONAL UNSTEADY TEMPERATURE DISTRIBUTION UNDER REFRIGERATION INSTALLATIONS

Heat Transfer ◽  
1971 ◽  
pp. 69-76
Author(s):  
E.S. KURYLEV ◽  
E.L. LICHTENSTEIN
Author(s):  
G Atefi ◽  
M A Abdous ◽  
A Ganjehkaviri ◽  
N Moalemi

The objective of this article is to derive an analytical solution for a two-dimensional temperature field in a hollow cylinder, which is subjected to a periodic boundary condition at the outer surface, while the inner surface is insulated. The material is assumed to be homogeneous and isotropic with time-independent thermal properties. Because of the time-dependent term in the boundary condition, Duhamel's theorem is used to solve the problem for a periodic boundary condition. The periodic boundary condition is decomposed using the Fourier series. This condition is simulated with harmonic oscillation; however, there are some differences with the real situation. To solve this problem, first of all the boundary condition is assumed to be steady. By applying the method of separation of variables, the temperature distribution in a hollow cylinder can be obtained. Then, the boundary condition is assumed to be transient. In both these cases, the solutions are separately calculated. By using Duhamel's theorem, the temperature distribution field in a hollow cylinder is obtained. The final result is plotted with respect to the Biot and Fourier numbers. There is good agreement between the results of the proposed method and those reported by others for this geometry under a simple harmonic boundary condition.


2010 ◽  
Vol 40 (5) ◽  
pp. 529-532 ◽  
Author(s):  
Naomi Hirayama ◽  
Akira Endo ◽  
Kazuhiro Fujita ◽  
Yasuhiro Hasegawa ◽  
Naomichi Hatano ◽  
...  

2010 ◽  
Vol 42 (1) ◽  
pp. 99-124 ◽  
Author(s):  
A.K. Shukla ◽  
A. Mondal ◽  
A. Upadhyaya

The present study compares the temperature distribution within cylindrical samples heated in microwave furnace with those achieved in radiatively-heated (conventional) furnace. Using a two-dimensional finite difference approach the thermal profiles were simulated for cylinders of varying radii (0.65, 6.5, and 65 cm) and physical properties. The influence of susceptor-assisted microwave heating was also modeled for the same. The simulation results reveal differences in the heating behavior of samples in microwaves. The efficacy of microwave heating depends on the sample size and its thermal conductivity.


2008 ◽  
Vol 57 (8) ◽  
pp. 4812
Author(s):  
Liu Dong ◽  
Wang Fei ◽  
Huang Qun-Xing ◽  
Yan Jian-Hua ◽  
Chi Yong ◽  
...  

1991 ◽  
Vol 113 (3) ◽  
pp. 627-634 ◽  
Author(s):  
K. Vafai ◽  
J. Ettefagh

The present work centers around a numerical three-dimensional transient investigation of the effects of axial convection on flow and temperature fields inside an open-ended annulus. The transient behavior of the flow field through the formation of a three-dimensional flow field and its subsequent effect on the temperature distribution at different axial locations within the annulus were analyzed by both finite difference and finite element methods. The results show that the axial convection has a distinctly different influence on the temperature and velocity fields. It is found that in the midportion of the annulus a two-dimensional assumption with respect to the temperature distribution can lead to satisfactory results for Ra<10,000. However, such an assumption is improper with respect to the flow field. Furthermore, it is shown that generally the errors for a two-dimensional assumption in the midportion of the annulus are less at earlier times (t<50Δt) during the transient development of the flow and temperature fields.


2017 ◽  
Vol 22 (1) ◽  
pp. 5-23 ◽  
Author(s):  
P. Ailawalia ◽  
S.K. Sachdeva ◽  
D. Pathania

AbstractThe purpose of this paper is to study the two dimensional deformation in a thermoelastic micropolar solid with cubic symmetry. A mechanical force is applied along the interface of a thermoelastic micropolar solid with cubic symmetry (Medium I) and a thermoelastic solid with microtemperatures (Medium II). The normal mode analysis has been applied to obtain the exact expressions for components of normal displacement, temperature distribution, normal force stress and tangential coupled stress for a thermoelastic micropolar solid with cubic symmetry. The effects of anisotropy, micropolarity and thermoelasticity on the above components have been depicted graphically.


Sign in / Sign up

Export Citation Format

Share Document