Utility-Scale Solar Power

Author(s):  
Philip R. Wolfe
Keyword(s):  
Author(s):  
Henry Price ◽  
Mark Mehos ◽  
Chuck Kutscher ◽  
Nate Blair

Solar energy is the largest energy resource on the planet. Unfortunately, it is largely untapped at present, in part because sunlight is a very diffuse energy source. Concentrating solar power (CSP) systems use low cost reflectors to concentrate the sun’s energy to allow it to be used more effectively. Concentrating solar power systems are also well suited for large solar power plants that can be connected into the existing utility infrastructure. These two facts mean that CSP systems can be used to make a meaningful difference in energy supply in a relatively short period. CSP plants are best suited for the arid climates in the Southwestern United States, Northern Mexico, and many desert regions around the globe. A recent Western Governors’ Association siting study [1] found that the solar potential in the U.S. Southwest is at least 4 times the total U.S. electric demand even after eliminating urban areas, environmentally sensitive areas, and all regions with a ground slope greater than 1%.While it is currently not practical to power the whole county from the desert southwest, only a small portion of this area is needed to make a substantial contribution to future U.S. electric needs. Many of the best sites are near existing high-voltage transmission lines and close to major power load centers in the Southwest (Los Angeles, Las Vegas, and Phoenix). In addition, the power provided by CSP technologies has strong coincidence with peak electric demand, especially in the Southwest where peak demand corresponds in large part to air conditioning loads. Parabolic troughs currently represent the most cost-effective CSP technology for developing large utility-scale solar electric power systems. These systems are also one of the most mature solar technologies, with commercial utility-scale plants that have been operating for over 20 years. In addition, substantial improvements have been made to the technology in recent years including improved efficiency and the addition of thermal energy storage. The main issue for parabolic trough technology is that the cost of electricity is still higher than the cost of electricity from conventional natural gas-fired power plants. Although higher natural gas prices are helping to substantially reduce the difference between the cost of electricity from solar and natural gas plants, in the near-term increased incentives such as the 30% Investment Tax Credit (ITC) are needed to make CSP technology approach competitiveness with natural gas power on a financial basis. In the longer term, additional reductions in the cost of the technology will be necessary. This paper looks at the near-term potential for parabolic trough technology to compete with conventional fossil power resources in the firm, intermediate load power market and at the longer term potential to compete in the baseload power market. The paper will consider the potential impact of a reduced carbon emissions future.


2020 ◽  
Author(s):  
Joyce Bosmans ◽  
Tine Dammeier ◽  
Mark Huijbregts

<p>Wind and solar power are vital for climate change mitigation, producing electricity at much lower greenhouse gas (GHG) emissions than conventional fossil-based technologies. Here, we obtain facility-specific environmental footprints of utility-scale wind and solar power across the globe. We investigate how the GHG footprint of wind and solar power varies across space and across technological characteristics. We will furthermore investigate other environmental footprints such as mineral resource scarcity to assess whether there is a trade-off between low GHG footprints and possibly higher other footprints.</p><p>We use facility-specific technological characteristics of ~30,000 wind parks and ~10,000 photovoltaic solar parks across the globe, such as capacity, hub height, rotor diameter or type of panel, to determine the life-cycle environmental impacts per wind or solar park. The produced power per facility over its lifetime is computed based on technological characteristics as well as location-specific hourly climate input from the ERA5 reanalysis dataset. The environmental footprint is then defined as impact divided by power produced, e.g. g CO<sub>2</sub>-eq/kWh, to allow for comparison between facilities and across energy sources.</p><p>The facility-specific footprints will be shown on maps to indicate spatial variability and range of footprints of both wind and solar power. We will furthermore investigate the variability in footprints using analysis of variance, in order to indicate whether climate (i.e. location-specific wind or radiation) or technological characteristics (i.e. hub height, rotor diameter or type of panel) is the main cause of variability in footprints.</p>


2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Serhan M. Ardanuç ◽  
Amit Lal ◽  
Samuel C. Jones

This paper presents a modular and scalable approach to concentrated solar power (CSP) harvesting by using low-profile, light-weight, sun-tracking, millimeter-to-centimeter-scale mirror arrays that can be wirelessly controlled to reflect the incident solar energy to a central receiver. Conventional, utility-scale CSP plants use large-area heliostats, parabolic troughs, or dish collectors that are not only heavy and bulky, but also require significant labor for installation and maintenance infrastructure. Furthermore, form-factors of current heliostats are not compatible with low-profile roof-mountable systems, as seen by the dominance of the conventional Photovoltaic systems for roof-top installations. Solar TILE (STILE) technology to be presented in this work enables concentrated solar power harvesting on a given surface with form factor and weight per unit area comparable to those of ceramic tiles used on walls/floors or that of Photovoltaic modules. Self-powered operation by integrated solar cells, elimination of wiring for power transfer, wireless control, and weather-proof enclosure of moving parts help STILE technology promise lower installation and maintenance costs than PV approaches, while enabling novel beam-redirection applications over large surfaces. As the STILEs are made of mostly plastic, which costs at least an order of magnitude less than solar grade silicon, associated material costs could potentially be much cheaper than silicon PV cells. After a description of the STILE technology and a discussion of mirror scaling, we present a prototype tile with dimensions 33 × 33 × 6.4 cm3 and detail its wireless operation.


Author(s):  
Nicole C. Foureaux ◽  
Leonardo Adolpho ◽  
Sidelmo Magalhaes Silva ◽  
Jose Antonio de S. Brito ◽  
Braz de J. Cardoso Filho

Author(s):  
Michael DiGrazia ◽  
Randy Gee ◽  
Gary Jorgensen

Reflectors are an essential part of parabolic trough solar electric and other concentrating solar power (CSP) systems. Reflectors in CSP systems require a high reflectance over the solar wavelength spectrum and they must be durable to outdoor exposure and resist all forms of degradation over time. All utility-scale CSP systems installed to date use glass reflectors. Glass mirrors have maintained their reflectance very well in CSP environments, but they are susceptible to wind-related breakage and are expensive to transport and install. Alternative lower-cost reflectors are needed to reduce the cost of CSP systems [1]. ReflecTech® Mirror Film is a highly reflective polymer-based film co-developed with the National Renewable Energy Laboratory (NREL) for concentrating solar energy applications. The attributes of ReflecTech® Mirror Film and test results for weatherability are described herein. This paper discusses field and lab test results and properties of ReflecTech® Mirror Film, specifically: 1. Stability under ultraviolet (UV) light through accelerated testing and outdoor real-time testing. 2. Mechanical stability and resistance to moisture through water immersion tests for delamination and “tunneling”. 3. Mechanical resistance to high wind events common in utility-scale concentrating solar power applications. 4. Lighter weight and resistance to breakage that reduces transportation and installation costs, and allows greater design flexibility of concentrator geometries. 5. Lower initial cost compared with curved glass mirrors. To test for weatherability, reflector samples were subjected to controlled conditions more extreme than actual outdoor environments. NREL maintains a world-class testing capability for solar reflectors that includes a Solar Simulator (SS), QUV (an accelerated exposure chamber manufactured by Q-Lab Corp. that subjects materials to alternating cycles of light and condensation at elevated temperatures), and several WeatherOmeter® (WOM) exposure chambers that allow accelerated testing of reflector samples. In addition, samples of ReflecTech® Mirror Film have been subjected to ACUVEX® accelerated outdoor weathering tests (natural sunlight in Phoenix, AZ, concentrated 7 to 8 times with a Fresnel-reflector while the samples are cooled with a fan to near ambient conditions and sprayed with de-ionized water 8 min per natural sun hour). Immersion tests were also performed to test the resistance of ReflecTech® Mirror Film to extreme moisture. Test results compared ReflecTech® film performance to past film products like 3M’s ECP-300 and ECP-305+ which suffered from “tunneling” [2], a problem whereby the silver reflective layer delaminates from the polymer film in the presence of moisture.


Sign in / Sign up

Export Citation Format

Share Document