scholarly journals ARRC: A random ray neutron transport code for nuclear reactor simulation

2018 ◽  
Vol 112 ◽  
pp. 693-714 ◽  
Author(s):  
John R. Tramm ◽  
Kord S. Smith ◽  
Benoit Forget ◽  
Andrew R. Siegel
2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Ji Ma ◽  
Chen Hao ◽  
Lixun Liu ◽  
Yuekai Zhou

For nuclear reactor physics, uncertainties in the multigroup cross sections inevitably exist, and these uncertainties are considered as the most significant uncertainty source. Based on the home-developed 3D high-fidelity neutron transport code HNET, the perturbation theory was used to directly calculate the sensitivity coefficient of keff to the multigroup cross sections, and a reasonable relative covariance matrix with a specific energy group structure was generated directly from the evaluated covariance data by using the transforming method. Then, the “Sandwich Rule” was applied to quantify the uncertainty of keff. Based on these methods, a new SU module in HNET was developed to directly quantify the keff uncertainty with one-step deterministic transport methods. To verify the accuracy of the sensitivity and uncertainty analysis of HNET, an infinite-medium problem and the 2D pin-cell problem were used to perform SU analysis, and the numerical results demonstrate that acceptable accuracy of sensitivity and uncertainty analysis of the HNET are achievable. Finally, keff SU analysis of a 3D minicore was analyzed by using the HNET, and some important conclusions were also drawn from the numerical results.


Nukleonika ◽  
2021 ◽  
Vol 66 (4) ◽  
pp. 139-145
Author(s):  
Wojciech Żurkowski ◽  
Piotr Sawicki ◽  
Wojciech Kubiński ◽  
Piotr Darnowski

Abstract This work presents a demonstrational application of genetic algorithms (GAs) to solve sample optimization problems in the generation IV nuclear reactor core design. The new software was developed implementing novel GAs, and it was applied to show their capabilities by presenting an example solution of two selected problems to check whether GAs can be used successfully in reactor engineering as an optimization tool. The 3600 MWth oxide core, which was based on the OECD/NEA sodium-cooled fast reactor (SFR) benchmark, was used a reference design [1]. The first problem was the optimization of the fuel isotopic inventory in terms of minimizing the volume share of long-lived actinides, while maximizing the effective neutron multiplication factor. The second task was the optimization of the boron shield distribution around the reactor core to minimize the sodium void reactivity effect (SVRE). Neutron transport and fuel depletion simulations were performed using Monte Carlo neutron transport code SERPENT2. The simulation resulted in an optimized fuel mixture composition for the selected parameters, which demonstrates the functionality of the algorithm. The results show the efficiency and universality of GAs in multidimensional optimization problems in nuclear engineering.


2021 ◽  
pp. 107915
Author(s):  
Sooyoung Choi ◽  
Wonkyeong Kim ◽  
Jiwon Choe ◽  
Woonghee Lee ◽  
Hanjoo Kim ◽  
...  

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Zhengang Zhao ◽  
Yunying Zheng

Fractional neutron transport equation reflects the anomalous transport processes in nuclear reactor. In this paper, we will construct the fully discrete methods for this type of fractional equation with Riesz derivative, where the generalized WENO5 scheme is used in spatial direction and Runge–Kutta schemes are adopted in temporal direction. The linear stabilities of the generalized WENO5 schemes with different stages and different order ERK are discussed detailed. Numerical examples show the combinations of forward Euler/two-stage, second-order ERK and WENO5 are unstable and the three-stage, third-order ERK method with generalized WENO5 is stable and can maintain sharp transitions for discontinuous problem, and its convergence reaches fifth order for smooth boundary condition.


2020 ◽  
Vol 149 ◽  
pp. 107799
Author(s):  
Yue Sun ◽  
Junhe Yang ◽  
Yahui Wang ◽  
Zhuo Li ◽  
Yu Ma

1968 ◽  
Vol 46 (10) ◽  
pp. S1023-S1026 ◽  
Author(s):  
S. A. Korff ◽  
R. B. Mendell ◽  
M. Merker ◽  
W. Sandie

We have extended in time our series of balloon flights, made at several latitudes between Hyderabad, India, and Ft. Churchill, Manitoba, to altitudes close to the top of the atmosphere. In these flights the neutrons generated by the cosmic radiation in the energy interval between 1 and 10 MeV are measured. The first set of measurements was made during the period of the minimum of solar activity, and the more recent flights carry the work into the start of the next solar cycle. A decrease in intensity at high elevations with the onset of the present solar cycle has been noted. Further data were also obtained on an airplane flight around the world over both poles, thus covering the full range of latitudes at two opposite longitudes. The relationship between the observed neutron spectrum and that derived by the use of a neutron transport code will be discussed. We shall also discuss other factors emerging from this analysis, including the numbers for radiocarbon production and the leakage flux.


Author(s):  
Tatjana Jevremovic ◽  
Mathieu Hursin ◽  
Nader Satvat ◽  
John Hopkins ◽  
Shanjie Xiao ◽  
...  

The AGENT (Arbitrary GEometry Neutron Transport) an open-architecture reactor modeling tool is deterministic neutron transport code for two or three-dimensional heterogeneous neutronic design and analysis of the whole reactor cores regardless of geometry types and material configurations. The AGENT neutron transport methodology is applicable to all generations of nuclear power and research reactors. It combines three theories: (1) the theory of R-functions used to generate real three-dimensional whole-cores of square, hexagonal or triangular cross sections, (2) the planar method of characteristics used to solve isotropic neutron transport in non-homogenized 2D) reactor slices, and (3) the one-dimensional diffusion theory used to couple the planar and axial neutron tracks through the transverse leakage and angular mesh-wise flux values. The R-function-geometrical module allows a sequential building of the layers of geometry and automatic submeshing based on the network of domain functions. The simplicity of geometry description and selection of parameters for accurate treatment of neutron propagation is achieved through the Boolean algebraic hierarchically organized simple primitives into complex domains (both being represented with corresponding domain functions). The accuracy is comparable to Monte Carlo codes and is obtained by following neutron propagation through real geometrical domains that does not require homogenization or simplifications. The efficiency is maintained through a set of acceleration techniques introduced at all important calculation levels. The flux solution incorporates power iteration with two different acceleration techniques: Coarse Mesh Rebalancing (CMR) and Coarse Mesh Finite Difference (CMFD). The stand-alone originally developed graphical user interface of the AGENT code design environment allows the user to view and verify input data by displaying the geometry and material distribution. The user can also view the output data such as three-dimensional maps of the energy-dependent mesh-wise scalar flux, reaction rate and power peaking factor. The AGENT code is in a process of an extensive and rigorous testing for various reactor types through the evaluation of its performance (ability to model any reactor geometry type), accuracy (in comparison with Monte Carlo results and other deterministic solutions or experimental data) and efficiency (computational speed that is directly determined by the mathematical and numerical solution to the iterative approach of the flux convergence). This paper outlines main aspects of the theories unified into the AGENT code formalism and demonstrates the code performance, accuracy and efficiency using few representative examples. The AGENT code is a main part of the so called virtual reactor system developed for numerical simulations of research reactors. Few illustrative examples of the web interface are briefly outlined.


2013 ◽  
Vol 37 (23) ◽  
pp. 9747-9767 ◽  
Author(s):  
Vishwesh A. Vyawahare ◽  
P.S.V. Nataraj

Sign in / Sign up

Export Citation Format

Share Document