Effect of aluminum on the catalytic performance and reaction mechanism of Mn/MCM-41 for NH3-SCR reaction

2020 ◽  
Vol 534 ◽  
pp. 147592 ◽  
Author(s):  
Jing Li ◽  
Jiaxiu Guo ◽  
Xueke Shi ◽  
Xinru Wen ◽  
Yinghao Chu ◽  
...  
Keyword(s):  
Reaction Mechanism ◽  
Catalytic Performance ◽  
Nh3 Scr ◽  
Mcm 41

scholarly journals Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5651
Author(s):  
Aleksandra Jankowska ◽  
Agata Chłopek ◽  
Andrzej Kowalczyk ◽  
Małgorzata Rutkowska ◽  
Marek Michalik ◽  
...  
Keyword(s):  
Ammonia Oxidation ◽  
Surface Acidity ◽  
Catalytic Performance ◽  
Emission Spectrometry ◽  
High Catalytic Activity ◽  
Reaction Products ◽  
Nh3 Scr ◽  
Vis Spectroscopy ◽  
Temperature Programmed ◽  
Mcm 41

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N2 sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH3-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H2-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH3-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH3-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH3-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH3-SCR) and their selective oxidation (NH3-SCO) was verified by temperature-programmed surface reactions.

Enhanced catalytic performance in low-temperature NH3-SCR process of spherical MCM-41 modified with Cu by template ion-exchange and ammonia treatment

2021 ◽  
Vol 315 ◽  
pp. 110920
Author(s):  
Aleksandra Jankowska ◽  
Agata Chłopek ◽  
Andrzej Kowalczyk ◽  
Małgorzata Rutkowska ◽  
Włodzimierz Mozgawa ◽  
...  
Keyword(s):  
Low Temperature ◽  
Ion Exchange ◽  
Catalytic Performance ◽  
Ammonia Treatment ◽  
Nh3 Scr ◽  
Mcm 41

The design and catalytic performance of molybdenum active sites on an MCM-41 framework for the aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran

2019 ◽  
Vol 9 (3) ◽  
pp. 811-821 ◽  
Author(s):  
Zhao-Meng Wang ◽  
Li-Juan Liu ◽  
Bo Xiang ◽  
Yue Wang ◽  
Ya-Jing Lyu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Active Sites ◽  
Aerobic Oxidation ◽  
Catalytic Performance ◽  
Mcm 41

The catalytic activity decreases as –(SiO)3Mo(OH)(O) > –(SiO)2Mo(O)2 > –(O)4–MoO.

CO2 valorization into synthetic natural gas (SNG) using a Co–Ni bimetallic Y2O3 based catalysts

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Radwa A. El-Salamony ◽  
Sara A. El-Sharaky ◽  
Seham A. Al-Temtamy ◽  
Ahmed M. Al-Sabagh ◽  
Hamada M. Killa
Keyword(s):  
Reaction Mechanism ◽  
Natural Gas ◽  
Fixed Bed ◽  
Catalytic Performance ◽  
Fixed Bed Reactor ◽  
Molar Ratio ◽  
Impregnation Method ◽  
Synthetic Natural Gas ◽  
Methanation Reaction ◽  
Co2 Valorization

Abstract Recently, because of the increasing demand for natural gas and the reduction of greenhouse gases, interests have focused on producing synthetic natural gas (SNG), which is suggested as an important future energy carrier. Hydrogenation of CO2, the so-called methanation reaction, is a suitable technique for the fixation of CO2. Nickel supported on yttrium oxide and promoted with cobalt were prepared by the wet-impregnation method respectively and characterized using SBET, XRD, FTIR, XPS, TPR, and HRTEM/EDX. CO2 hydrogenation over the Ni/Y2O3 catalyst was examined and compared with Co–Ni/Y2O3 catalysts, Co% = 10 and 15 wt/wt. The catalytic test was conducted with the use of a fixed-bed reactor under atmospheric pressure. The catalytic performance temperature was 350 °C with a supply of H2:CO2 molar ratio of 4 and a total flow rate of 200 mL/min. The CH4 yield was reached 67%, and CO2 conversion extended 48.5% with CO traces over 10Co–Ni/Y2O3 catalyst. This encourages the direct methanation reaction mechanism. However, the reaction mechanism over Ni/Y2O3 catalyst shows different behaviors rather than that over bi-metal catalysts, whereas the steam reforming of methane reaction was arisen associated with methane consumption besides increase in H2 and CO formation; at the same temperature reaction.

scholarly journals Preparation of the WOX/MCM-41 Solid Acid Catalyst and the Catalytic Performance for Solketal Synthesis

ACS Omega ◽  
2021 ◽  
Vol 6 (5) ◽  
pp. 3875-3883
Author(s):  
Yixuan Huang ◽  
Guangcai Zhang ◽  
Qinhui Zhang
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Catalytic Performance ◽  
Mcm 41

scholarly journals Novel Preparation of Cu and Fe Zirconia Supported Catalysts for Selective Catalytic Reduction of NO with NH3

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 55
Author(s):  
Katarzyna Świrk ◽  
Ye Wang ◽  
Changwei Hu ◽  
Li Li ◽  
Patrick Da Costa ◽  
...  
Keyword(s):  
Selective Catalytic Reduction ◽  
Catalytic Reduction ◽  
Supported Catalysts ◽  
Catalytic Performance ◽  
Experimental Conditions ◽  
One Pot ◽  
Nh3 Scr ◽  
Scr Of No ◽  
Temperature Programmed ◽  
Stationary Sources

Copper and iron promoted ZrO2 catalysts were prepared by one-pot synthesis using urea. The studied catalysts were characterized by XRD, N2 physisorption, XPS, temperature-programmed desorption of NH3 (NH3-TPD), and tested by the selective catalytic reduction by ammonia (NH3-SCR) of NO in the absence and presence of water vapor, under the experimental conditions representative of exhaust gases from stationary sources. The influence of SO2 on catalytic performance was also investigated. Among the studied catalysts, the Fe-Zr sample showed the most promising results in NH3-SCR, being active and highly selective to N2. The addition of SO2 markedly improved NO and NH3 conversions during NH3-SCR in the presence of H2O. The improvement in acidic surface properties is believed to be the cause.

Preparation of Immobilized Chromium Schiff Base Complexes and their Catalytic Performance for Olefins Epoxidation

2014 ◽  
Vol 692 ◽  
pp. 240-244
Author(s):  
Gong De Wu ◽  
Xiao Li Wang ◽  
Zhi Li Zhai
Keyword(s):  
Hydrogen Peroxide ◽  
Schiff Base ◽  
Elemental Analysis ◽  
Catalytic Performance ◽  
Schiff Base Complexes ◽  
Metal Centers ◽  
Chemical Measurements ◽  
Physico Chemical ◽  
Immobilized Complexes ◽  
Mcm 41

A series of transition metal alanine-salicylaldehyde Schiff base chromium (III) complexes immobilized on MCM-41 were prepared and characterized by various physico-chemical measurements such as FIIR, XRD, HRTEM, N2 sorption and elemental analysis. The immobilized complexes were effective and stable catalysts for the epoxidation of styrene and cyclohexene with 30% hydrogen peroxide. Moreover, the metal centers were found to play important roles in the catalytic performance of immobilized complex catalysts.

Sign in / Sign up

Export Citation Format

Share Document