scholarly journals Merbromin is a mixed-type inhibitor of 3-chyomotrypsin like protease of SARS-CoV-2

2021 ◽  
Author(s):  
Junjie Chen ◽  
Yaya Zhang ◽  
Dequan Zeng ◽  
Bingchang Zhang ◽  
Xiaohong Ye ◽  
...  
Keyword(s):  
Mixed Type ◽  
Mixed Type Inhibitor

Corrosion Inhibition of N,N- diethylammonium O,O′- di (p-chlorophenyl) dithiophosphate for Carbon Steel in HCL Solution

2013 ◽  
Vol 781-784 ◽  
pp. 299-303
Author(s):  
Shu Lan Cai ◽  
Kang Quan Qiao ◽  
Fa Mei Feng
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Mixed Type ◽  
Electrochemical Impedance ◽  
Equivalent Circuit Model ◽  
Inhibition Effect ◽  
Inhibition Process ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

A new corrosion inhibior N,N-diethylammonium O,O-di (p-chlorophenyl) dithiophosphate (EDPDP) has been synthesized and its inhibition effect towards the corrosion of carbon steel in 1.0 molL-1 HCl solution at 25 °C has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The obtained results show that EDPDP is a excellent inhibitor and the inhibition efficiencies exceed 90 %. The polarization measurements reveal that EDPDP is a mixed type inhibitor and the equivalent circuit model of the corrosion inhibition process is obtained by the analysis of EIS data.

Psidium guajava Leaves as Corrosion Inhibitor of Al-6061

2021 ◽  
Vol 1045 ◽  
pp. 231-236
Author(s):  
Femiana Gapsari ◽  
Andita Ganda
Keyword(s):  
Adsorption Isotherm ◽  
Mixed Type ◽  
Electrochemical Measurement ◽  
Psidium Guajava ◽  
Aluminum Surface ◽  
Corrosion Characteristic ◽  
Polarization Test ◽  
Enthalpy And Entropy ◽  
Temkin Adsorption Isotherm ◽  
Mixed Type Inhibitor

The anti-corrosion characteristic of the extract of Psidiumguajava leaves on aluminum in 3.5 wt% sodium chloride were examined using electrochemical measurement. The thermodynamic factors such as the free energy adsorption, change in enthalpy, and entropy was also analyzed. The adsorption isotherm was detail described to study the adsorption of the inhibitor on the aluminum surface with various concentrations of the inhibitor. The electrochemical measurement was done through the potentiodynamic polarization test. The results show that the inhibitor act as the mixed type inhibitor and its adsorption on the aluminum surface obeys Temkin adsorption isotherm. The study suggests that the use of Psidium guajava leaves extract for the food industrial application is eco-friendly and safe, especially in salt solution medium.

The corrosion inhibition of carbon steel in 5 per cent HCl by Momordica charantia extract

2014 ◽  
Vol 61 (4) ◽  
pp. 255-260 ◽  
Author(s):  
Xie Xuejun* ◽  
Xiao Peng* ◽  
He Jie ◽  
Xiao Wen ◽  
Fu Qiang ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Mixed Type ◽  
Inhibition Efficiency ◽  
Xps Analysis ◽  
Content Type ◽  
Isotherm Equation ◽  
Inhibition Effect ◽  
Langmuir Isotherm Equation ◽  
Ir Analysis ◽  
Mixed Type Inhibitor

Purpose – To study the inhibition effect and mechanism of the Momordica charantia extract (BM) to 20 A carbon steel in 5 per cent HCl. Design/methodology/approach – The weight loss, polarization curve, infrared spectrum (IR) analysis and X-ray photoelectron spectrum (XPS) analysis were carefully investigated to indicate the inhibition effect and mechanism of the BM to 20 A carbon steel in 5 per cent HCl. Findings – BM was composed of C, N and O. Functional groups such as N–H and C=O were found in BM. The inhibition efficiency increased with the increasing concentration of BM. BM behaved as a mixed-type inhibitor, and the inhibition of BM to 20 A carbon steel might be its adsorption through the coordinate covalent bonding among the lone pair electrons of N and O and the empty 3d orbits of Fe, and the adsorption on the surface of 20 A carbon steel obeyed the Langmuir isotherm equation. Research limitations/implications – The inhibition of the BM to 20 A carbon steel in 5 per cent HCl. Practical implications – BM could be used in 5 per cent HCl to prevent 20 A carbon steel from corrosion. Social implications – BM could be used in the chemical cleaning of the boilers to prevent the thermal equipments from corrosion. Originality/value – The inhibition effect and mechanism of the BM to 20 A carbon steel were studied by the weight loss, polarization curve, IR analysis and XPS analysis. BM was composed of C, N and O. Functional groups such as N–H and C=O were found in BM. BM behaved as a mixed-type inhibitor. The inhibition efficiency increased with the increasing concentration of BM, and the adsorption on the surface of 20 A carbon steel obeyed the Langmuir isotherm equation.

Corrosion Inhibition of 2-Mercaptobenzothiazole for Carbon Steel in Sulfuric Acid Solution

2012 ◽  
Vol 557-559 ◽  
pp. 92-95 ◽  
Author(s):  
Xiao Feng Liang ◽  
Xue Yang
Keyword(s):  
Sulfuric Acid ◽  
Carbon Steel ◽  
Acid Solution ◽  
Sulfuric Acid Solution ◽  
Mixed Type ◽  
Sulfuric Acid Concentration ◽  
Weight Loss Measurement ◽  
Inhibition Effect ◽  
Effects Of Temperature ◽  
Mixed Type Inhibitor

The inhibition effect of 2-Mercaptobenzothiazole (2-MB) against the corrosion of carbon steel in sulfuric acid solution was studied by weight loss measurement and electrochemical measurements(potentiodynamic polarization techniques). The results show that 2-MB acts as a good corrosion inhibitor in sulfuric acid solution. Adsorption of 2-MB is found to obey Langmuir isotherm. Polarization curves indicate 2-MB is a mixed-type inhibitor. The effects of temperature and sulfuric acid concentration were also studied.

Adsorption Behavior and Corrosion Inhibition of 2-Benzothiazolethiol for Q235 Steel in Hydrochloric Acid Solution

2012 ◽  
Vol 212-213 ◽  
pp. 947-950
Author(s):  
Tao Wang ◽  
Xi Yang He ◽  
Xue Yang
Keyword(s):  
Hydrochloric Acid ◽  
Acid Solution ◽  
Hydrochloric Acid Solution ◽  
Mixed Type ◽  
Inhibition Efficiency ◽  
Hydrochloric Acid Concentration ◽  
Adsorption Behaviour ◽  
Q235 Steel ◽  
Increase With Increase ◽  
Mixed Type Inhibitor

The weight loss measurements and potentiodynamic polarization techniques are used to assess the inhibitive and adsorption behaviour of 2-Benzothiazolethiol (BTT) for Q235 steel in hydrochloric acid solution. The inhibition efficiency is found to increase with increase in BTT concentration but decrease with rise in temperature and hydrochloric acid concentration. The results show that BTT acts as a good corrosion inhibitor in hydrochloric acid solution. Adsorption of BTT is found to obey Langmuir isotherm. Polarization curves indicate BTT is a mixed-type inhibitor.

Inhibition Effect of N-Octyl-2-Pyrrolidonium Chloride on the Corrosion of Mild Steel in Acidic Medium

2013 ◽  
Vol 634-638 ◽  
pp. 651-654
Author(s):  
Zi Chong Zhuang ◽  
Bao Hua Huang ◽  
Jun Liu ◽  
Yu Jing Lu ◽  
Zhan Chang Pan ◽  
...  
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Acidic Medium ◽  
Mixed Type ◽  
Inhibition Efficiency ◽  
Electrochemical Techniques ◽  
Inhibition Mechanism ◽  
Inhibition Effect ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

A new ionic liquid, N-octyl-2-pyrrolidonium chloride (NOPC), were synthesized and evaluated as inhibitors for mild steel (Q235) corrosion in 1 mol/L HCl. The adsorption behavior and corrosion inhibition mechanism of NOPC for mild steel in HCl solution were investigated by using weight loss measurements, electrochemical techniques, and SEM. The inhibition efficiency increases with the increasing concentration of NOPC in 1 mol/L HCl and decreases as the temperature increases. The results indicate that NOPC is able to function as a mixed type inhibitor.

scholarly journals INHIBISI KOROSI BAJA RINGAN MENGGUNAKAN BAHAN ALAMI DALAM MEDIUM ASAM KLORIDA: Review

2019 ◽  
Vol 10 (1) ◽  
pp. 51
Author(s):  
Yeni Stiadi ◽  
Syukri Arief ◽  
Hermansyah Aziz ◽  
Mai Efdi ◽  
E. Emriadi
Keyword(s):  
Mild Steel ◽  
Plant Extracts ◽  
Mixed Type ◽  
Corrosion Inhibitors ◽  
Industrial Applications ◽  
Acidic Media ◽  
Acidic Environments ◽  
Corrosion Of Steel ◽  
Metal Etching ◽  
Mixed Type Inhibitor

The corrosion of steel and its alloys is an important problem in industry, especially in acidic environments. Mild steel is one of the important alloys of iron which has many industrial applications because of its excellent mechanical properties, but mild steel is susceptible to corrosion. Corrosion problems need to be a concern and must be handled properly. Hydrochloric acid is widely used for pickling, cleansing, decomposition and metal etching, on the other hand also contributes to corrosion of metal surfaces. Plant extracts investigated the properties, mechanisms of adsorption and efficiency of inhibition as environmentally friendly corrosion inhibitors for various steel materials in different acidic media. The efficiency of corrosion inhibition of steel from plant extracts analyzed ranged from 72-98% and generally as a mixed-type inhibitor. Most of the inhibitors are adsorbed on the steel surface through a physisorption mechanism.

scholarly journals Electrochemical and quantum chemical parameters of (-)-(S)-9-flu¬oro-2,3-dihydro-3-methyl-10-(4-methyl-1-pipera-zinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acidas anti-corrosive agent for API 5L X-52 steel

2020 ◽  
Vol 10 (3) ◽  
pp. 234-244
Author(s):  
Fidelis Ebunta Abeng ◽  
Magdalene Edet Ikpi ◽  
Victor E. Okpashi ◽  
Onumashi A. Ushie ◽  
Mbang E. Obeten
Keyword(s):  
Quantum Chemical ◽  
Mixed Type ◽  
Inhibition Efficiency ◽  
Quantum Chemical Study ◽  
Chemical Study ◽  
Chemical Parameters ◽  
Polarization Method ◽  
Quantum Chemical Parameters ◽  
Inhibitive Action ◽  
Mixed Type Inhibitor

The inhibitive action of (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid (Levaquin) on API 5L X-52 steel in 2 M HCl solution was investigated using potentiodynamic polarization method and quantum chemical study. Levaquin drug showed good inhibition efficiency of 88 and 95 % at 303 and 323 K, respectively. The results of experimental measurements revealed that Levaquin drug works as a mixed type inhibitor. Langmuir thermodynamic model was tested to describe the mode of inhibitor adsorption on the steel surface. The quantum chemical calculations confirmed the efficacy of Levaquin drug as a corrosion inhibitor.

scholarly journals Aizoon Extract As a Novel Eco-friendly Corrosion Inhibitor For Stainless Steel430 in HCl Solution

2021 ◽  
Author(s):  
Ahmed F. Molouk ◽  
Mohamed F. Atia ◽  
Abd El-Aziz S. Fouda
Keyword(s):  
Mixed Type ◽  
Electrochemical Impedance ◽  
Theoretical Data ◽  
Cathodic Reaction ◽  
Mass Reduction ◽  
Adsorption Model ◽  
Langmuir Adsorption ◽  
Langmuir Adsorption Model ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

Abstract Aizoon extract used as anti-corrosion for stainless steel430 (SS430) in 2M hydrochloric acid solution. The mass reduction, electrochemical impedance, and potentiodynamic polarization were carried out to demonstrate the performance of Aizoon extract as corrosion resistance for SS430. Polarization revealed that the Aizoon extract is mixed type inhibitor with superiority to inhibiting the cathodic reaction. The inhibition percentage reaches 93% at 300 ppm extract. Adsorption of the extract on SS430 surface is regular with Langmuir adsorption model. Thermodynamic factors for adsorption and activation processes for SS430 dissolution were estimated and discussed. Furthermore, the SS430 surface is characterized using different techniques. The surface morphology of SS430 was tested utilizing several techniques. The experimental data were supported by the theoretical data.

Adsorption Behavior and Corrosion Inhibition of EPP for Q235 Steel in H2SO4 Solution

2011 ◽  
Vol 287-290 ◽  
pp. 2923-2926 ◽  
Author(s):  
Li Ke Zou ◽  
Chuan Lai ◽  
Bin Xie ◽  
Xue Yang ◽  
Zhen Xiang ◽  
...  
Keyword(s):  
Immersion Time ◽  
Mixed Type ◽  
Langmuir Adsorption Isotherm ◽  
Weight Loss Measurement ◽  
Q235 Steel ◽  
Inhibition Effect ◽  
Langmuir Adsorption ◽  
Effects Of Temperature ◽  
Cathodic And Anodic Processes ◽  
Mixed Type Inhibitor

The inhibition effect of N,N-diethylammonium O,O'-di(2-phenylethyl)dithiophosphate (EPP, [NH2(Et)2][S2P(OCH2CH2Ph)2]2) against the corrosion of Q235 steel in H2SO4solution was studied by weight loss measurement, potentiodynamic polarization and SEM(scanning electron microscope) techniques. The results show that EPP acts as an excellent corrosion inhibitor in 5% H2SO4by suppressing simultaneously the cathodic and anodic processes via chemical adsorption on Q235 steel surface, which complies with the Langmuir adsorption isotherm. Polarization curves indicate EPP is a mixed-type inhibitor. The effects of temperature, acid concentration and immersion time were also studied.

Sign in / Sign up

Export Citation Format

Share Document