Carbon gel-supported Fe-graphene disks: Synthesis, adsorption of aqueous Cr(VI) and Pb(II) and the removal mechanism

2017 ◽  
Vol 326 ◽  
pp. 987-999 ◽  
Author(s):  
Shraddha Mishra ◽  
Ashish Yadav ◽  
Nishith Verma
Keyword(s):  
1997 ◽  
Vol 35 (8) ◽  
pp. 83-90
Author(s):  
Shigeo Fujii ◽  
Chiaki Niwa ◽  
Mitsuo Mouri ◽  
Ranjna Jindal

Applicability of the rock-bed filtration technique was investigated through pilot-plant experiments in Bangkok, Thailand. Polluted canal water was used as horizontal flow influent to two reactor channels filled with rocks. During one year operation, HRT, filter media, and aeration mode, were changed in several runs. The results showed that 1) the rock-bed filtration with aeration and the HRT more than 6 h can successfully improve polluted klong water by reducing the pollutants (e.g. 60-120mg/L of SS to 20-40 mg/L and 15-30 mg/L of BOD to 5-20 mg/L); 2) main removal mechanism seems to be the sedimentation resulting from the settleability enhanced by aeration, and the biofilm attached onto rocks also works in the reduction of soluble organic matter; 3) a combination of three rock sizes arranged in descending order showed best results; 4) longer HRT (13 h) produces better effluent but is not so effective if it exceeds 9 hours; 5) 60-70% of sediment IL was decomposed in a year, and porosity in rock beds reduced approximately 16%.


1999 ◽  
Vol 39 (6) ◽  
pp. 191-198 ◽  
Author(s):  
Timothy J. Hurse ◽  
Michael A. Connor

In an attempt to gain a better understanding of ammonia and nitrogen removal processes in multi-pond wastewater treatment lagoons, an analysis was carried out of data obtained during regular monitoring of Lagoon 115E at the Western Treatment Plant in Melbourne. To do this, a contour plot approach was developed that enables the data to be displayed as a function of pond number and date. Superimposition of contour plots for different parameters enabled the dependence of ammonia and nitrogen removal rates on various lagoon characteristics to be readily assessed. The importance of nitrification as an ammonia removal mechanism was confirmed. Temperature, dissolved oxygen concentration and algal concentration all had a significant influence on whether or not sizeable nitrifier populations developed and persisted in lagoon waters. The analysis made it evident that a better understanding of microbial, chemical and physical processes in lagoons is needed before their nitrogen removal capabilities can be predicted with confidence.


2021 ◽  
Vol 139 ◽  
pp. 106998
Author(s):  
Zhichao Li ◽  
Donghe Zhang ◽  
Xuan Su ◽  
Shirui Yang ◽  
Jie Xu ◽  
...  

2004 ◽  
Vol 471-472 ◽  
pp. 26-31 ◽  
Author(s):  
Jian Xiu Su ◽  
Dong Ming Guo ◽  
Ren Ke Kang ◽  
Zhu Ji Jin ◽  
X.J. Li ◽  
...  

Chemical mechanical polishing (CMP) has already become a mainstream technology in global planarization of wafer, but the mechanism of nonuniform material removal has not been revealed. In this paper, the calculation of particle movement tracks on wafer surface was conducted by the motion relationship between the wafer and the polishing pad on a large-sized single head CMP machine. Based on the distribution of particle tracks on wafer surface, the model for the within-wafer-nonuniformity (WIWNU) of material removal was put forward. By the calculation and analysis, the relationship between the motion variables of the CMP machine and the WIWNU of material removal on wafer surface had been derived. This model can be used not only for predicting the WIWNU, but also for providing theoretical guide to the design of CMP equipment, selecting the motion variables of CMP and further understanding the material removal mechanism in wafer CMP.


2021 ◽  
pp. 103773
Author(s):  
Ruiwen Geng ◽  
Xiaojing Yang ◽  
Qiming Xie ◽  
Jianguo Xiao ◽  
Wanqing Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document